Investigation of block depth distribution in PS‐b‐PMMA block copolymer using ultra‐low‐energy cesium sputtering in ToF‐SIMS

Directed self‐assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in‐depth distributions of the blocks should be well characterized; for the latter, time‐of‐flight (ToF) SIMS is a particularly well‐adapted technique. Here, we use an ION‐TOF ToF‐SIMS V in negative mode to provide qualitative information on the in‐depth organization of polystyrene‐b‐polymethylmethacrylate (PS‐b‐PMMA) BCP thin films. Using low‐energy Cs⁺ sputtering and Bi₃⁺ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS‐b‐PMMA BCPs are then characterized showing that self‐assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF‐SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF‐SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd.     

TCF selenium preconcentration in geological materials for determination at sub-mugg(-1) with INAA (Se/TCF-INAA)

In geological samples, Se concentration ranges from 1 × 10⁻⁹ g g⁻¹ up to 1 × 10⁻³ g g⁻¹. The analytical difficulty at low concentration (<1 μg g⁻¹), is one of the main reasons why the geological cycle of Se is poorly known. The analytical method that consisted of preconcentration of Se with thiol cotton fiber (TCF) followed by graphite furnace atomic absorption spectrometry (GFAAS) has been modified by finishing with instrumental neutron activation analysis (INAA). The modified technique involves sample dissolution (HF-HNO₃-H₂O₂) and evaporation to dryness at low temperature (55-60 °C) to avoid selenium volatilization. Se^VI is converted to Se^IV by adding 6 M HCl to the dry residuum and the solution is then heated in a covered boiling bath (95-100 °C). The solution is diluted to obtain 0.6 M HCl and then collected on TCF. The TCF is placed in a polyethylene vial for irradiation in the SLOWPOKE II reactor (Montréal) for 30 s at a neutron flux of 10¹⁵ m⁻² s⁻¹. The 162 keV peak of ^77mSe (half-life 17.36 s) is read for 20 s after a decay of 7 s. The amount of sample to be dissolved is controlled by two competing effects. To obtain low detection limits, a larger amount of sample should be dissolved. On the other hand, the TCF could become saturated with chalcophile elements when large sample is used. Sulfur is a good indicator of the amount of Se and chalcophile elements present. In S poor sample (<100 μg g⁻¹) 3.0 g of sample was used and the L_D was ∼2 ng g⁻¹. In S high samples (>1.5% S) 0.05 g of sample was used and the L_D was ∼120 ng g⁻¹. The present work also includes suggested Se concentration for eight international geological reference materials (IGRM) that compare favorably with literature values.     

The use of inverse gas chromatography to study surface thermal oxidation of polypropylene

Thermo-oxidative effects on the surface energy of polypropylene were measured by inverse gas chromatography as a function of exposure time and temperature. Unaltered polypropylene had a surface energy of 33 mJ/m². Oxidized polypropylene, after exposure to air at temperatures of 100 °C and 110 °C, had a range of maximum surface energies from 38 to 41 mJ/m². Comparisons between FTIR carbonyl peak growth and the surface energy showed that both methods detect oxidation, though the increase in surface energy is detected before the carbonyl peak growth is noticeable. The work of adhesion predicted by the surface free energies obtained in this work between a coated calcium carbonate and polypropylene changes by 10% due to the oxidation of the polymer at 110 °C.     

A moving mesh algorithm for aero‐thermo‐mechanical modelling in turbomachinery

This paper describes the development of a mesh deformation method used for aero‐thermo‐mechanical coupling of turbo‐engine components. The method is based on the nonlinear solution of an elastic medium analogy, solved using finite element discretisation and modified to let the boundary nodes be free to slide over the deflected surfaces. This sliding technique relies on a B‐spline reconstruction of the moving boundary and increases the robustness of the method in situations where the boundary deflection field presents significant gradients or large relative motion between two distinct boundaries. The performance of the method is illustrated with the application to an interstage cavity of a turbine assembly, subjected to the deformations computed by a coupled thermo‐mechanical analysis of the engine component. Copyright © 2011 John Wiley & Sons, Ltd.     

Differentiating Isobaric Steroid Hormone Metabolites Using Multi-Stage Tandem Mass Spectrometry

Steroid hormones and their metabolites are currently undergoing clinical trials as potential therapeutics for traumatic brain injury (TBI). To support this work, it is necessary to develop improved procedures for differentiating isobaric species in this compound class. Equilin sulfate (E-S), estrone sulfate (E1-S), 17α-dihydroequilin sulfate (ADHE-S), and 17β-dihydroequilin sulfate (BDHE-S) are primary constituents in hormone replacement therapies, such as Premarin, which are among pharmaceuticals being investigated for TBI treatment. The latter three compounds are isomers and can be difficult to differentiate in trace analytical determinations. In this work, a systematic study of the fragmentation of ADHE-S, BDHE-S, E1-S, and E-S under different stages of higher order tandem mass spectrometry (MSⁿ) and variation of collision energy, allowed optimization of conditions for distinguishing the isomeric structures. For epimeric variants (e.g., ADHE-S versus BDHE-S; α- versus β-stereoisomerization in the C-17 position), differentiation was achieved at MS⁴ and fragmentation was demonstrated through MS⁵. Computational analysis was performed to further explore differences in the fragmentation pathways due to changes in stereochemistry.      

Sequential Alkylation of Tröger's Base. An Approach to New Chiral Ligands

Heterocycles derived from Tröger's base were shown to complex with metal salts in 2:1 ligand:salt ratios as monodentate or bidentate ligands depending on structure.     

Cannabinoids in oral fluid by on-site immunoassay and by GC-MS using two different oral fluid collection devices

Oral fluid (OF) enables non-invasive sample collection for on-site drug testing, but performance of on-site tests with occasional and frequent smokers’ OF to identify cannabinoid intake requires further evaluation. Furthermore, as far as we are aware, no studies have evaluated differences between cannabinoid disposition among OF collection devices with authentic OF samples after controlled cannabis administration. Fourteen frequent (≥4 times per week) and 10 occasional (less than twice a week) adult cannabis smokers smoked one 6.8 % ?⁹-tetrahydrocannabinol (THC) cigarette ad libitum over 10 min. OF was collected with the StatSure Saliva Sampler, Oral-Eze, and Draeger DrugTest 5000 test cassette before and up to 30 h after cannabis smoking. Test cassettes were analyzed within 15 min and gas chromatography–mass spectrometry cannabinoid results were obtained within 24 h. Cannabinoid concentrations with the StatSure and Oral-Eze devices were compared and times of last cannabinoid detection (t _last) and DrugTest 5000 test performance were assessed for different cannabinoid cutoffs. 11-nor-9-Carboxy-THC (THCCOOH) and cannabinol concentrations were significantly higher in Oral-Eze samples than in Stat-Sure samples. DrugTest 5000 t _last for a positive cannabinoid test were median (range) 12 h (4–24 h) and 21 h (1–?≥?30 h) for occasional and frequent smokers, respectively. Detection windows in screening and confirmatory tests were usually shorter for occasional than for frequent smokers, especially when including THCCOOH ≥20 ng L^?1 in confirmation criteria. No differences in t _last were observed between collection devices, except for THC ≥2 μg L^?1. We thus report significantly different THCCOOH and cannabinol, but not THC, concentrations between OF collection devices, which may affect OF data interpretation. The DrugTest 5000 on-site device had high diagnostic sensitivity, specificity, and efficiency for cannabinoids.     

Analysis of the quantum numbers J(PC) of the X(3872) particle

We present an analysis of angular distributions and correlations of the X(3872) particle in the exclusive decay mode X(3872)-->J/psipi+ pi- with J/psi-->mu+ mu-. We use 780 pb-1 of data from pp[over ] collisions at sqrt[s]=1.96 TeV collected with the CDF II detector at the Fermilab Tevatron. We derive constraints on spin, parity, and charge conjugation parity of the X(3872) particle by comparing measured angular distributions of the decay products with predictions for different J(PC) hypotheses. The assignments J(PC)=1++ and 2-+ are the only ones consistent with the data.     

Measurement of the top-quark mass in all-hadronic decays in pp collisions at CDF II

We present a measurement of the top-quark mass Mtop in the all-hadronic decay channel tt-->W+bW-b-->q1q2bq3q4b. The analysis is performed using 310 pb-1 of sqrt[s]=1.96 TeV pp[over ] collisions collected with the CDF II detector using a multijet trigger. The mass measurement is based on an event-by-event likelihood which depends on both the sample purity and the value of the top-quark mass, using 90 possible jet-to-parton assignments in the six-jet final state. The joint likelihood of 290 selected events yields a value of Mtop=177.1+/-4.9(stat)+/-4.7(syst) GeV/c2.     

Chemical depth profiling and 3D reconstruction of III–V heterostructures selectively grown on non‐planar Si substrates by MOCVD

The chemical characterization of novel 3D architectures with nanometre‐scale dimensions is extremely challenging. The chemical composition of InGaAs/AlAs quantum wells selectively grown in SiO₂ trenches, 100–300 nm wide, is studied. Combining high lateral resolution 3D ToF‐SIMS analysis and Auger measurements, the chemical composition of individual trenches was obtained confirming the uniformity of these III–V heterostructures. These results correlate well with an average approach using SIMS depth profiling. The effects of ion beam orientation on the surface topography of confined structures were highlighted. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)