Lanthanum(III) and uranyl(VI) diglycolamide complexes: synthetic precursors and structural studies involving nitrate complexation

The synthesis and structural characterization of lanthanum(III) and uranyl(VI) complexes coordinated by tridentate diglycolamide (DGA) ligands O(CH2C(O)NR2)2[R=i-Pr (L1), i-Bu (L2)] are described. Reaction of L with UO2Cl2(H2O) n forms the uranyl(VI) cis-dichloride adducts UO2Cl2L [L=L1 (1a), L2 (1b)], while reaction of excess L with the corresponding metal nitrate hydrate produces [LaL3][La(NO3)6] [L=L1 (2a), L2 (2b)] for lanthanum and UO2(NO3)2L [L=L1 (3a), L2 (3b)] for uranium. Compounds 2b and 3a have been structurally characterized. The solid-state structure of the cation of 2b shows a triple-stranded helical arrangement of three tridentate DGA ligands with approximate D3 point-group symmetry, while the counteranion consists of six bidentate nitrate ligands coordinated around a second La center. The solid-state structure of 3a shows a tridentate DGA ligand coordinated along the equatorial plane perpendicular to the OUO unit as well as two nitrate ligands, one bidentate and oriented in the equatorial plane and the other monodentate and oriented parallel to the uranyl unit with the oxygen donor atom situated above the mean equatorial plane. Ambient-temperature NMR spectra for 3a and 3b indicated an averaged chemical environment of high symmetry consistent with fluxional nitrate hapticity, while spectroscopic data obtained at -30 degrees C revealed lower symmetry consistent with the slow-exchange limit for this process.     

Reaction of Cl atoms with C6F13CH2OH, C6F13CHO, and C3F7CHO

The Cl atom initiated oxidation of C(6)F(13)CH(2)OH, C(6)F(13)CHO, and C(3)F(7)CHO was investigated at 298 K and 1000 mbar pressure of air in a photoreactor using in situ Fourier transform infrared (FTIR) analysis. The rate coefficient for the reaction Cl + C(6)F(13)CH(2)OH (reaction 2) was measured using a relative method: k(2) = (6.5 +/- 0.8) x 10(-13) cm(3) molecule(-1) s(-1). C(6)F(13)CHO was detected as the major primary product, while CO and CF(2)O were found to be the major secondary products. A fitting procedure applied to the concentration-time profiles of C(6)F(13)CHO provided a production yield of (1.0 +/- 0.2) for this aldehyde in reaction 2, and the rate coefficient for the reaction Cl + C(6)F(13)CHO (reaction 4) was k(4) = (2.8 +/- 0.7) x 10(-12) cm(3) molecule(-1) s(-1). A high CO yield observed in the oxidation of C(6)F(13)CH(2)OH, (52 +/- 1)%, is attributed to the Cl atom initiated oxidation of C(6)F(13)CHO. High CO yields, (61 +/- 2)% and (85 +/- 5)%, were also measured in the Cl atom initiated oxidation of C(3)F(7)CHO in air and nitrogen, respectively. These high CO yields suggest the occurrence of a decomposition reaction of the perfluoroacyl, C(6)F(13)CO, and C(3)F(7)CO radicals to form CO which will compete with the combination reaction of these radicals with oxygen to form perfluoroacyl peroxy radicals in the presence of air. The latter radicals C(n)F(2)(n)(+1)CO(O)(2) (n = 6-12), through their reaction with HO(2) radicals, are currently considered as a possible source of persistent perfluorocarboxylic acids which have been detected in the environment. The consequences of the present results would be a reduction of the strength of this potential source of carboxylic acids in the atmosphere.     

New chiral benzothiazine ligand and its use in the synthesis of a chiral receptor

The development of chiral ligands to direct the course and stereoselectivity of many catalytic asymmetric reactions is an important area of interest for many research groups. As part of a program examining the chemistry of 2,1-benzothiazines, we have prepared a new chiral benzothiazine ligand. This ligand can be made in as few as three steps from commercially available starting materials. Presented herein is the synthesis of the ligand along with the synthesis of a chiral molecular receptor that potentially presages a new class of chiral molecular tweezers.     

多酸含量对无机/高分子复合薄膜结构及光致变色性能的影响

制备了一系列不同浓度的钨磷酸/聚乙烯醇(PWA/PVA)复合薄膜, 通过红外光谱、原子力显微镜、紫外-可见吸收光谱对复合薄膜的结构和光致变色性能进行了研究. 红外光谱分析结果表明, Keggin结构钨磷酸和聚乙烯醇分子的基本结构在复合薄膜中仍然存在, 钨磷酸分子与高分子底物间存在氢键作用, 形成电荷转移桥. 原子力显微镜(AFM)结果表明复合前后PVA薄膜表面形貌发生了显著变化, 复合膜表面形貌随钨磷酸含量的不同而不同. 在紫外光照射下, 复合薄膜由无色变为蓝色. 复合膜的升色速度和褪色速度均随着钨磷酸含量的增加而加快. 这些结果表明钨磷酸含量对复合膜的微结构存在影响, 从而导致了复合膜具有不同的光致变色性能.     

顶空气相色谱-质谱联用结合同位素峰形校正检索技术鉴别芝麻油风味成分

采用顶空气相色谱-质谱联用(GC-MS)仪结合同位素峰形校正检索技术鉴别了市售芝麻油风味成分中的71种化合物,占总检出化合物的90.2%。检出化合物可分为吡嗪、吡咯、吡啶、噻唑、噻吩、吲哚、唑、呋喃、醛类和酚类等,其中醛、酚、吡嗪和呋喃类化合物的含量较高,分别占风味成分含量的37.4%,20.1%,10.0%和6.7%。同位素峰形校正检索技术在低分辨率质谱上可对化合物的相对分子质量实现精确测量,从而为低分辨率四极杆质谱确定化合物的元素组成和解析化合物结构提供了重要依据,同时也为芝麻油的成分分析提供了新的技术手段。     

Quantification of Thiopurine/UVA-Induced Singlet Oxygen Production

Thiopurines were examined for their ability to produce singlet oxygen ((1)O(2)) with UVA light. The target compounds were three thiopurine prodrugs, azathioprine (Aza), 6-mercaptopurine (6-MP) and 6-thioguanine (6-TG), and their S-methylated derivatives of 6-methylmercaptopurine (me6-MP) and 6-methylthioguanine (me6-TG). Our results showed that these thiopurines were efficient (1)O(2) sensitizers under UVA irradiation but rapidly lost their photoactivities for (1)O(2) production over time by a self-sensitized photooxidation of sulfur atoms in the presence of oxygen and UVA light. The initial quantum yields of (1)O(2) production were determined to be in the range of 0.30-0.6 in aqueous solutions. Substitution of a hydrogen atom with a nitroimidazole or methyl group at S decreased the efficacy of photosensitized (1)O(2) production as found for Aza, me6-MP and me6-TG. (1)O(2)-induced formation of 8-oxo-7,8-dihydro-2'-dexyguanosine (8-oxodGuo) was assessed by incubation of 6-methylthiopurine/UVA-treated calf thymus DNA with human repair enzyme 8-oxodGuo DNA glycosylase (hOGG1), followed by apurinic (AP) site determination. Because more 8-oxodGuo was formed in Tris D(2)O than in Tris H(2)O, (1)O(2) is implicated as a key species in the reaction. These findings provided quantitative information on the photosensitization efficacy of thiopurines and to some extent revealed the correlations between photoactivity and phototoxicity.     

Pyrrole β-amides: Synthesis and characterization of a dipyrrinone carboxylic acid and an N-Confused fluorescent dipyrrinone

Pyrrole β-amides are useful building blocks for the preparation of novel molecular architectures that can be used in supramolecular chemistry and sensor development. Under basic conditions, pyrrole β-amides with an α-aldehyde produce different condensation products when reacted with pyrrolinones depending on the amide substitution. Secondary amides form the expected dipyrrinones, but unexpectedly undergo a subsequent trans-amidation with the pyrrolinone nitrogen to produce an unsymmetrical imide (an N-confused fluorescent dipyrrinone). Under the same conditions, tertiary amides produce the expected dipyrrinone carboxylic acids, which have been shown to have strong self-association properties as determined by vapor pressure osmometry measurements, NMR studies, and X-ray crystal structure determination. Furthermore, an N-confused fluorescent dipyrrinone was produced from the same trans-amidation reaction during attempts to decarboxylate a dipyrrinone amide with a 9-carboxylic moiety.     

超高效液相色谱法测定鱼体组织中地克珠利残留量

建立了鱼体血浆、肌肉、皮肤、肝脏、肾脏和鳃组织中地克珠利残留量测定的超高效液相色谱法(UPLC-TUV)。鱼体血浆、肝脏和肾脏组织采用乙酸乙酯提取,50 mmol/L KH2PO4溶液去除组织中的蛋白,正己烷去脂;鱼体肌肉、皮肤和鳃组织采用乙腈提取,用乙酸乙酯从40 g/L NaCl溶液中进行反萃取,正己烷去除脂肪;以乙腈-0.3%乙酸水溶液为流动相,以ACQUITY UPLC BEH C18为分离柱,柱温为30℃,紫外检测波长为280 nm。地克珠利质量浓度在0.05~10.0 mg/L范围内呈线性相关,相关指数r2=0.999。平均回收率为70.3%~93.5%,相对标准偏差为0.81%~8.6%,地克珠利在鱼体肌肉、皮肤、脂肪和腮组织组织中的检出限为25μg/kg,定量限为50μg/kg;地克珠利在鱼体血浆、肝脏和肾脏样品中组织中的检出限和定量限分别为75μg/kg和100μg/kg。方法适用于鱼体各组织中地克珠利残留量的测定。     

Investigation of block depth distribution in PS‐b‐PMMA block copolymer using ultra‐low‐energy cesium sputtering in ToF‐SIMS

Directed self‐assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in‐depth distributions of the blocks should be well characterized; for the latter, time‐of‐flight (ToF) SIMS is a particularly well‐adapted technique. Here, we use an ION‐TOF ToF‐SIMS V in negative mode to provide qualitative information on the in‐depth organization of polystyrene‐b‐polymethylmethacrylate (PS‐b‐PMMA) BCP thin films. Using low‐energy Cs⁺ sputtering and Bi₃⁺ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS‐b‐PMMA BCPs are then characterized showing that self‐assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF‐SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF‐SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Nonstoichiometric laser materials: Designer wavelengths in neodymium-doped garnets

The tunable nature of lasers provides for a wide range of applications. Most applications rely on finding available laser wavelengths to meet the needs of the research. This article presents the concept of compositional tuning, whereby the laser wavelength is designed by exploiting nonstoichiometry. For research where precise wavelengths are required, such as remote sensing, this is highly advantageous. A theoretical basis for the concept is presented and experimental results in spectroscopic measurements support the theoretical basis. Laser operation nicely demonstrates the validity of the concept of designer lasers.