Studies on the [2,3]-Stevens rearrangement of aziridinium ions

The aziridinium ylide generated by the intramolecular reaction of a metal carbenoid tethered to a vinylaziridine undergoes [2,3]-Stevens rearrangement to furnish the indolizidine skeleton. It is essential that the correct nitrogen invertomer is used or a competing [1,5]-hydrogen shift predominates. During the preparation of a second system a `one-pot' acylation-[3,3]-Claisen rearrangement was observed, delivering a seven-membered lactam.     

Determination of some trace elements in human tooth enamel

Determination of seven elements (Cu, Fe, Mg, Mn, Pb, Sr and Zn) in whole enamel and surface layers of extracted non-carious human teeth by FAAS, ETA AAS, ICP-AES and ICP-MS (Pb) is demonstrated. Techniques are described for obtaining whole enamel and its acid dissolution. Fifty microm width enamel layers from outer enamel surface to a 200 microm depth were successively etched in 1 mL of 3 M HClO4 for 3 min dissolution periods. Enamel samples were analyzed for populations under and over 20 years of age and enamel from Bronze Age teeth. Concentrations of microelements in the whole enamel and in the first surface layer (50 microm depth) were compared. With exception of Sr and Mg, all elements show significantly higher concentrations in the first layer than in whole enamel and higher concentration in teeth of individuals over 20 years, which demonstrate the cumulative effect of these elements. The Cu, Fe, Mn, Pb and Zn concentrations in four layers of erupted and non-erupted teeth decreased while Mg and Sr concentrations increased toward enamel-dentine junction. The concentrations of most elements were almost constant as they approached the 150 microm layer. This concentration gradient may result from interaction between saliva and teeth and supports the hypothesis that the surface de- and re-mineralization process is effective at most to 150 microm from the enamel surface.     

Determination of lead concentration and lead isotope ratios in calcium supplements by inductively coupled plasma mass spectrometry after high pressure, high temperature digestion

The presence of lead as a contaminant in calcium supplements has aroused considerable public health interest in recent years. In this investigation lead and lead isotope ratios were determined by ICP-MS in ten brands of calcium supplements after high pressure/temperature digestion. Calcium supplements (200 to 250 mg) were digested in 2 mL of nitric acid at 230?°C and at a pressure of 1770 psi (1.2 × 10⁴ kPa). Lead concentrations were determined by matrix-matched lead standards prepared in a high-purity calcium carbonate matrix. Good recoveries of lead and calcium were obtained for certified animal bone reference material. High levels of Pb (8 to 28 μg Pb per g of calcium) were found in calcium supplements that contain dolomite or bone meal. Chelated and refined calcium supplements had lower Pb levels (0.8 to 0.9 μg Pb/g Ca). Application of lead isotope ratios to distinguish the origin of calcium sources was also explored.     

Infrared and Raman matrix isolation studies of methylamine

Infrared (4000-50 cm^?1) and Raman spectra are reported of methylamine, methylamine-d₁ and methylamine-d₂ trapped in argon and nitrogen matrices at 4–20 K. An anomalous intensity variation was found for the NH₂ wagging mode of methylamine isolated in nitrogen matrices, while in argon matrices the NH₂ wagging absorption exhibited a complex structure due to matrix site effects. A normal coordinate analysis was carried out using a new assignment of the NHD twisting frequency. Barriers to internal rotation in argon and nitrogen matrices, calculated from the observed torsional frequencies, are compared with the gas phase value.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

Characterization of supramolecular (H2O)18 water morphology and water-methanol (H2O)15(CH3OH)3 clusters in a novel phosphorus functionalized trimeric amino acid host

Phosphorus functionalized trimeric alanine compounds (l)- and (d)-P(CH(2)NHCH(CH(3))COOH)(3) 2 are prepared in 90% yields by the Mannich reaction of Tris(hydroxymethyl)phosphine 1 with (l)- or (d)- Alanine in aqueous media. The hydration properties of (l)-2 and (d)-2 in water and water-methanol mixtures are described. The crystal structure analysis of (l)-2.4H(2)O, reveals that the alanine molecules pack to form two-dimensional bilayers running parallel to (001). The layered structural motif depicts two closely packed monolayers of 2 each oriented with its phosphorus atoms projected at the center of the bilayer and adjacent monolayers are held together by hydrogen bonds between amine and carboxylate groups. The water bilayers are juxtaposed with the H-bonded alanine trimers leading to 18-membered (H(2)O)(18) water rings. Exposure of aqueous solution of (l)-2 and (d)-2 to methanol vapors resulted in closely packed (l)-2 and (d)-2 solvated with mixed water-methanol (H(2)O)(15)(CH(3)OH)(3) clusters. The O-O distances in the mixed methanol-water clusters of (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH (O-O(average) = 2.857 A) are nearly identical to the O-O distance observed in the supramolecular (H(2)O)(18) water structure (O-O(average) = 2.859 A) implying the retention of the hydrogen bonded structure in water despite the accommodation of hydrophobic methanol groups within the supramolecular (H(2)O)(15)(CH(3)OH)(3) framework. The O-O distances in (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH and in (H(2)O)(18) are very close to the O-O distance reported for liquid water (2.85 A).     

Degradation of deoxycholic acid by Pseudomonas Sp. NCIB 10590

The microbial degradation of deoxycholic acid 1 by Pseudomonas NCIB 10590 has been studied and two major products have been isolated and identified as 12β-hydroxyandrosta-1,4-dien-3,17-dione 2 and 12α-hydroxypregna-1,4-dien-3-one-20-carboxylic acid 9. Three minor products were isolated and evidence is given for the following structures: 12α-hydroxyandrosta-1,4-dien-3,17-dione 4, 12β-hydroxyandrosta-4-en-3,17-dione 7 and 12?, 17?-dihydroxyandrosta-1,4-dien-3-one 8.     

酵母核糖核酸在碳纳米管修饰电极上的电化学行为及其分析测定

研究了酵母核糖核酸（yRNA）在碳纳米管（MWNT）修饰电极上的电化学行为，优化了测定参数，在此基础上建立了一种直接测定yRNA的电分析测试方法。yRNA在碳纳米管修饰电极上于磷酸盐缓冲溶液中在0．758V处产生不可逆的氧化电流峰，峰电流与yRNA的质量浓度在1～10mg／mL之间有良好的线性关系，线性回归方程为：Iρ=0．0813ρ＋0．1807，相关系数r为0．9980，检出限为0．6mg／mL。     

Capillary electrophoresis and inductively coupled plasma spectrometry: Status report

This report focuses on the status, requirements, and potentials of CE-ICP-MS. The ultimate goal of a viable CE-ICP-MS system is to obtain quantitative elemental speciation information and isotopic ratio data for practical biological and environmental metal containing compounds. To make use of the CE separation features, the CE analyte must be introduced efficiently into the ICP. For practical samples, pre- and post-separation enrichment techniques probably are required. The features of electrospray ion sources that can be incorporated in CE-ICP-MS and the potential for microfabricated CE are discussed.