REASSESSMENT OF THE DIFFERENTIAL EFFECTS OF ULTRAVIOLET AND IONIZING RADIATION ON HIV PROMOTER: THE USE OF CELL SURVIVAL AS THE BASIS FOR COMPARISONS

Abstract: Effects of different radiation treatments on the human immunodeficiency virus-1 (HIV) promoter were reassessed for exposures comparable to those encountered in clinical or cosmetic practice, using survival of the host cell as a basis for comparisons. The exposures were performed with two ultraviolet radiation sources commonly used as medical or cosmetic devices (UVASUN 2000 and FS20 lamps), a germicidal (G15T8) lamp and an X-ray machine. The UVC component of the FS20 lamp was filtered out. The emission spectra of the lamps were determined. The characteristics of these sources allowed us to discriminate among effects of UVA1 (340–400 nm), UVB + UVA2 (280–340 nm) and UVC (254 nm) radiations. Effects of irradiation were ascertained using cultures of HeLa cells stably transfected with the HIV promoter linked to a reporter—chloramphenicol acetyl transferase—gene. The exposures used caused at least two logs of cell killing. In this cytotoxicity range, UVA1 or X radiations had no effect on the HIV promoter, whereas UVB + UVA2 or UVC radiations activated the HIV promoter in a fluence-dependent manner. Survivals following exposure to UVB + UVA2 or UVC radiation were (1) at the lowest measurable HIV promoter activation, 30 and 20%, respectively, (2) at one-half maximal activation, 6 and 3%, respectively and (3) at the maximal activation, 0.5 and 0.2%, respectively. The results suggest that, among the radiations studied, UVB is the most important modality from the viewpoint of its potential effects on HIV-infected individuals, since (1) UVA1 or X radiations have no effects on the HIV promoter, (2) human exposure to UVC radiation is infrequent and (3) human UVB exposure is very common.     

Method validation and qualification of instruments for atomic spectrometry

This work describes the analytical procedures for atomic absorption and inductively coupled plasma (ICP) techniques that have to be used in order to obtain a license to sell drugs in the USA. The qualification of atomic absorption spectrometers and ICP instruments is described. The method validation characteristics, e.g., accuracy, precision, linearity, range, detection limits, and quantification are discussed. The time involved and the quality of documentation are pointed out. The consequences for laboratory personnel and operating costs are also discussed.     

Groups of paramagnetic centres in coal samples with different carbon contents

Complex systems of paramagnetic centres existing in demineralised flame coal (71.4 wt% C), medium-rank coal (85.6 wt% C) and anthracite (94.9 wt% C) were analysed by electron paramagnetic resonance spectroscopy (EPR). Different groups of paramagnetic centres were searched in macerals (exinite, vitrinite, inertinite) of coals with carbon contents of 73.8 wt% C and 85.6 wt% C. Experimental EPR spectra were fitted by different superposition of theoretical lines. Total concentration of paramagnetic centres both in coal and macerals increases with carbon content in the sample. Total concentration of paramagnetic centres in macerals increases from exinite to inertinite. Four groups of paramagnetic centres were found in medium-rank coal, and only two groups exist in flame coal and anthracite. The EPR spectrum of medium-rank coal is a superposition of two broad and two narrow lines. Both broad and narrow, and two narrow lines were measured in EPR spectra of flame coal and anthracite, respectively. Two types of paramagnetic centres with broad lines and one group with narrow lines exist in exinite and vitrinite from medium-rank coal. Two narrow components were observed in EPR spectra of its inertinite. Two different broad electron paramagnetic resonance signals were detected for macerals from low-coalificated coal. Paramagnetic centres systems of medium-rank coal samples reveal the most complex character. Broad EPR lines were not observed for the higher coalificated samples, i.e., anthracite and inertinite from medium-rank coal. Narrow lines do not occur in EPR spectra of low-coalificated macerals. Strong dipolar interactions and fast spin-lattice relaxation processes are characteristic for paramagnetic centres with broad lines. Strong exchange interactions and short spin-lattice relaxation time were measured for paramagnetic centres with the narrowest EPR signals.     

Stereochemistry of isoplagiochin C, a macrocyclic bisbibenzyl from liverworts

Cyclic bisbibenzyls, like isoplagiochins C (1) and D (2), are stereochemically intriguing molecules: Although not equipped with any of the traditional stereogenic elements that render molecules conformationally stable per se, they are sometimes isolated in an optically active form and are thus chiral at room temperature. The paper describes quantum chemical calculations, in particular investigations of the conformational space and molecular dynamics simulations, showing that the helicity is a property of the entire molecule, whose ring strain makes the molecule configurationally stable overall, with (formally) three stereogenic elements (two biaryl axes and one helical stilbene unit). Only one of the biaryl axes (the 'upper' one, joining C-12' and C-14) has a stable configuration, leading to a population of four interconverting diastereomers, yet without racemization at room temperature. On the basis of these conformational and dynamic calculations, the circular dichroism spectrum of isoplagiochin C (1) was calculated, leading to the first assignment of the absolute configuration of a cyclic bisbibenzyl. Accordingly, 1 has the P-configuration at the stereochemically stable biaryl axis and constitutes a mixture of diastereomers with respect to the other biaryl axis and the helical stilbene unit. From the temperature dependence of the racemization rates, an enantiomerization barrier of 101.6 kJ/mol was determined. Likewise, for the first time for cyclic bisbibenzyls, the enantiomeric ratio of this natural product was determined, by chromatography on a chiral phase with CD-coupling. Accordingly, 1 from Plagiochila deflexa is not enantiomerically pure, but occurs in a 85:15 ratio in favor of the enantiomer that has the P-configuration at the stereochemically stable axis.     

Sequential determination of platinum, ruthenium, and molybdenum in carbon-supported Pt, PtRu, and PtMo catalysts by atomic absorption spectrometry

A simple accurate and precise analytical method for the determination of platinum, ruthenium, and molybdenum in Pt, PtRu, and PtMo nanoparticles catalysts deposited on high-surface area carbon by flame atomic absorption spectrometry (FAAS) and graphite furnace atomic absorption spectrometry (GFAAS) is described. The complete digestion of samples (0.010-0.020 g), which contain noble metals (NMs) in the range between 0 and 30% in combination among them or with other non-NMs, is obtained under mild conditions using both concentrated HCl and HCl+HNO₃ (1+1 (v/v)) mixture to boiling for 30 min in an open vessel. Carbon is separated from the solution by filtering it. Under optimized conditions of the flame, the poor sensitivity of platinum is enhanced 50-fold in presence of 1% (m V⁻¹) ascorbic acid, whereas the analytical signal of ruthenium increased by the presence of co-existing platinum. Any kind of interference is observed on the analytical signal of molybdenum. Recovery test obtained by analyzing commercial powder catalysts ranged from 99 to 101%. The precision, expressed as relative standard deviation of five measurements, is better than 1%. Electrode catalysts, made by using the carbon-supported platinum-based powder catalysts, have been analyzed for the metal loadings onto the electrode by GFAAS after dissolution under the same conditions used for the powder catalysts. The precision, expressed as relative standard deviation of three measurements, is better than 2%.     

GIAO/DFT evaluation of 13C NMR chemical shifts of selected acetals based on DFT optimized geometries

DFT/B3LYP calculations of the ground-state conformation of eight cyclic and acyclic acetals are presented and compared with experimental data. Results of single-point GIAO/DFT calculations at five different levels of theory show that isotropic shieldings need to be empirically scaled to achieve agreement with experimental chemical shifts. Statistical evaluation of data indicates that the most accurate prediction of 13C chemical shifts is achieved at the MPW1PW91/6-311G** level of theory. An empirical equation describing the relationship between delta values and shielding constants is postulated. This equation has been applied to the non-chair ground-state conformation of the six-membered acetonide and to the conformationally flexible benzodioxonine derivative. The agreement observed between the experimental and predicted chemical shifts shows that calculations at the MPW1PW91/6-311G** level of theory are adequate for addressing questions of conformation.     

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.     

Association of model peptides and dehydropeptides: N-acetyl-l-alanine- and dehydroalanine N′,N′-dimethylamides

The comparative studies on the association of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ in carbon tetrachloride were performed by the analysis of their average molecular weight, dipole moments and FTIR spectra. To aid spectroscopic interpretation and gain some deeper insight into the nature of associates, the geometries of the minimum energy of the dimers of Ac-ΔAla-NMe₂ and Ac-l-Ala-NMe₂ were calculated by the B3LYP/6-31+G** method. The average molecular weight in the studied concentration range, for the ΔAla and l-Ala peptide, as determined by the osmometric method, did not exceed 1.5 and 1.2 of the monomeric mass, respectively. Accordingly, the percentage of the monomeric form (α) decreased as concentration was increased more significantly for the ΔAla analogue than for its saturated counterpart. In the studied concentrations, the dipole moment of the unsaturated compound decreases and that of its counterpart is almost constant. We identified a wider range of dimeric forms of Ac-ΔAla-NMe₂ than those of Ac-l-Ala-NMe₂. While Ac-ΔAla-NMe₂ mainly forms cyclic dimers, built of open conformers H/F, specific for α,β-dehydroamino acids, Ac-l-Ala-NMe₂ forms cyclic and linear dimers, characteristic for the usual amino acids. Ac-ΔAla-NMe₂ has a greater tendency to associate than its saturated variant, which is the result of stronger hydrogen bonds.     

Molecular vibrations in a gradient extremal path

Summary The calculation of vibrational states using a gradient extremal path is discussed. Gradient extremal paths are defined by local criteria, which lead to stable solutions. This has certain advantages in comparison with a steepest-descent path, which is often difficult to determine accurately. For cases where a reaction path formalism is applicable, a path based on the gradient extremal concept gives results in close agreement with those obtained using traditional steepest-descent methods. We present algorithms for carrying out such calculations and also give some numerical results.     

Generalized inverse method for computation of molecular force field

The generalized inverse method is applied to the force constants calculation problem having a nearly singular Jacobian matrix, and by substituting it by one of lower rank which is near to it and well conditioned it is possible to eliminate the convergence difficulties of the least squares iteration process. A further significant advantage of the method is that certain matrix theoretical considerations give the possibility of deciding at the end of the iteration which force constants are determined by the available observations. Numerical results for the dimethylmercury molecule are given.