Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

Amorphous and nanocrystalline luminescent Si and Ge obtained via a solid-state chemical metathesis synthesis route

A new solid-state metathesis synthesis route was applied to obtain bulk samples of amorphous or microcrystalline Si and Ge. The method involves reaction of Zintl phases such as NaSi or NaGe, with ammonium or metal (e.g., CuCl, CoBr₂) halides. The driving force for the solid-state reaction is provided by the formation of alkali halides and the transition metals or metal silicides, or gaseous ammonia and hydrogen. The semiconductors were purified by washing to remove other solid products. The amorphous semiconductors were obtained in bulk form from reactions carried out at 200-300 °C. Syntheses at higher temperatures gave rise to microcrystalline semiconductors, or to micro-/nanocrystalline particles contained within the amorphous material. Similar crystalline/amorphous composites were obtained after heat treatment of bulk amorphous materials.     

Biologically active metabolites from fungi, 19: new isocoumarins and highly substituted benzoic acids from the endophytic fungus, Scytalidium sp

Six known metabolites, two new isocoumarins 4 and 8, and one new highly substituted benzoic acid derivative 9 were isolated from the ethyl acetate culture extract of a fungal endophyte, Scytalidium sp. In addition, another new benzoic acid 10 with an unusual 1,2-dicarbonyl side chain was indirectly identified from its methylated derivatives 10a-10d.     

Determination of selenium in human tissues by atomic absorption spectrometry

A simple method is described for the determination of selenium in human tissues without the use of perchloric acid. Digestion with nitric and sulphuric acids is followed by hydride generation and atomic absorption spectrometry. Results for NBS bovine liver and IAEA horse kidney reference materials were in good agreement with assigned concentrations, as was also achieved with the perchloric acid digestion. Recovery of added selenium was >90%, and the relative standard deviation was 5.5% for within-batch and 6.9% for between-batch analyses. The values of selenium in heart tissue were 0.9–1.3 μg g^?1 dry weight.     

Estimation of the lipophilicity of antiarrhythmic and antihypertensive active 1-substituted pyrrolidin-2-one and pyrrolidine derivatives

The lipophilicity of some antiarrhythmic and antihypertensive active 1-[2-hydroxy- or 1-[2-acetoxy-3-(4-aryl-1-piperazinyl)propyl]pyrrolidin-2-one derivatives (1-12) has been investigated. Their lipophilicity (R(MO) and log k') was determined by reversed-phase thin-layer chromatography and reversed-phase high-performance liquid chromatography with mixtures of acetonitrile and Tris buffer as mobile phases. The partition coefficients of compounds 1-12 (log P(ScilogP)) were also calculated with the ScilogP program. Comparison of R(MO), log k' and calculated log D(7.0 ScilogP) values enabled calculation of clog D(7.0 TLC) and clog D(7.0 HPLC) values. Preliminary quantitative structure-activity relationship studies indicated that for active compounds there is a dependence between affinity for alpha(2)-adrenoceptors and their clog D(7.0 HPLC) values.     

Binuclear wirelike dimers based on ruthenium(II)-bipyridine units linked by ethynylene-oligothiophene-ethynylene bridges

The syntheses, structural characteristics, electrochemical behavior, ground-state spectra, photophysical properties, and transient absorption (TA) spectra in CH(3)CN solvent are reported for binuclear [(bpy)(2)Ru(bpy-E(T)(n)()E-bpy)Ru(bpy)(2)](4+) complexes, Ru(bpyT(n)bpy)Ru, where the Ru-based units are connected by alternating 3,4-dibutylthiophene (DBT')/thiophene (T') fragments linked via ethynyl groups (E) to bpy ligands at the 5-position (bpy is 2,2'-bipyridine). The ligand bpyT(3)bpy represents a module containing DBT'/T'/DBT' subunits, and bpyT(5)bpy accounts for a DBT'/T'/DBT'/T'/DBT' pattern. The syntheses and electrochemical and spectroscopic (emission and TA) properties in CH(2)Cl(2) solvent of the bpyT(n)()bpy ligands are likewise reported. The behavior of the Ru(bpyT(n)bpy)Ru dimers has been compared to that of the bpyT(n)bpy ligands and to that of a related mononuclear complex, [(bpy)(2)Ru(bpy-E-DBT')](2+), Ru(bpyDBT'). For the dimeric complexes, the electrochemical results show that the first reduction step takes place at the bpy ligand(s) bearing an ethynylene group, the first oxidation step is thiophene-centered, and further oxidation involves the metal centers, which are only weakly interacting. The photophysical and TA results for the Ru(bpyT(n)bpy)Ru dimers account for the presence of low-lying oligothiophene-centered (3)pi,pi levels, while higher-lying metal-ligand charge transfer ((3)MLCT) levels are thermally accessible only for the case of Ru(bpyT(3)bpy)Ru; the possible role of charge separation (CS) levels (from oxidation at the thiophene bridge and reduction at one of the coordinated bpy's) is also discussed.     

Determination of trace metals by ICP-OES in plant materials after preconcentration of 1,10-phenanthroline complexes on activated carbon

In this work, 1,10-phenanthroline was used as a complexing agent for the separation and preconcentration of Cd(II), Co(II), Ni(II), Cu(II) and Pb(II) on activated carbon. The metals were adsorbed on activated carbon by two methods: static (1) and dynamic (2). The optimal condition for separation and quantitative preconcentration of metal ions with activated carbon for the proposed methods was for (1) in the static methods in the pH range 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (92.6%), Co(II) (95.6%), Pb(II) (91.0%), and with 3 mol dm⁻³ HNO₃ for Cd(II) (95.4%), Pb(II) (100.2%). The preconcentration factor was 100 with R.S.D. values between 1.0 and 2.9%. For (2), the dynamic method (SPE), the pH range for the quantitative sorption was 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (100.6%), Pb(II) (94.4%), and reasonably high recovery for Co(II) (83%), Cu(II) (88%). The optimum flow rate of metal ions solution for quantitative sorption of metals with 1,10-phenanthroline was 1-2 cm³ min⁻¹ whereas for desorption it was 1 cm³ min⁻¹. The preconcentration factor was 50 for all the ions of the metals with R.S.D. values between 2.9 and 9.8%.The samples of the activated carbon with the adsorbed trace metals can be determined by ICP-OES after mineralization by means of a high-pressure microwave mineralizer. The proposed method provides recovery for Cd (100.8%), Co (97.2%), Cu (94.6%), Ni (99.6%) and Pb (100.0%) with R.S.D. values between 1.2 and 3.2%.The preconcentration procedure showed a linear calibration curve within the concentration range 0.1-1.5 μg cm⁻³. The limits of detection values (defined as “blank + 3s” where s is standard deviation of the blank determination) are 5.8, 70.8, 6.7, 24.6, and 10.8 μg dm⁻³ for Cd(II), Pb(II), Co(II), Ni(II) and Cu(II), respectively, and corresponding limit of quantification (blank + 10s) values were 13.5, 151.3, 20.0, 58.9 and 33.2 μg dm⁻³, respectively.As a result, these simple methods were applied for the determination of the above-mentioned metals in reference materials and in samples of plant material.     

Crossed-beam study of Co+(3F4)+propane: experiment and density functional theory

A pulsed beam of Co+(3F4) crosses a pulsed beam of C3H8 or C3D8 gas under single collision conditions at collision energies of 0.01 eV and 0.21 eV. After a variable time delay t(ext) = 1-8 micros a fast high voltage pulse extracts product ions into a field-free flight tube for mass analysis. Consistent with earlier work, we observe prompt CoC3H6+ +H2 elimination products in 3:1 excess over CoC2H4+ +CH4 products at 0.21 eV on a 2-10 micros time scale. Long-lived CoC3H8+ complexes fragment predominantly back to Co+ +C3H8 reactants and to H2 elimination products on a 6-24 micros time scale. Density functional theory (B3LYP) calculations provide energies, geometries, and harmonic vibrational frequencies at key stationary points for use in a statistical rate model of the reaction. By adjusting two key multicenter transition state (MCTS) energies downward by 4-7 kcal mol(-1), we obtain good agreement with our decay time results and with the cross section versus collision energy of Armentrout and co-workers from 0.1-1.0 eV. B3LYP theory succeeds in finding relative energies of the MCTSs leading to CH4 and H2 in the proper order to explain the different product branching ratio for Co+ (which favors H2 over CH4) compared with its nearest neighbors Fe+ and Ni+ (which favor CH4 over H2).