PRIMARY DNA DAMAGE, HPRT MUTATION AND CELL INACTIVATION PHOTOINDUCED WITH VARIOUS SENSITIZERS IN V79 CELLS

DNA strand breaks and hypoxanthine guanine phosphoribosyl transferase (HPRT) mutants were measured in parallel in photochemically treated (PCT) cells and compared at the same level of cell survival. Chinese hamster fibroblasts (V79 cells) were either incubated with the lipophilic dyes tetra(3—hydroxyphenyl)porphyrin (3THPP) and Photofrin II (PII), the anionic dye meso -tetra(4—sulfonatophenyl)porphine (TPPS₄) or the cationic dye meso -tetra( N -methyl-4-pyridyl)porphine ( p -TMPyPH₂ before light exposure. In the cells, the lipophilic dyes were localized in membranes, including the nuclear membrane, while the hydrophilic dyes were taken up primarily into spots in the cytoplasm. In addition, the hydrophilic TPPS₄ was distributed homogeneously throughout the whole cytoplasm and nucleoplasm. According to the HPRT mutation test, the mutagenicity of light doses survived by 10% of the cells was a factor of six higher in the presence of 3THPP than of PII, whereas for X-rays it was a factor of three higher than for PCT with 3THPP. Light exposure in the presence of the hydrophilic dyes TPPS₄ and p -TMPyPH₂ was not significantly mutagenic. There was no correlation between the induced rates of HPRT mutants and of DNA strand breaks. Thus, TPPS₄ was the most efficient sensitizer with regard to DNA strand breaks when compared at the same level of cell survival, followed by 3THPP, PII and p -TMPyPH₂. Hence, the rate of DNA strand breaks cannot be used to predict the mutagenicity of PCT.     

Synthesis and Crystal Structure of Cesium Hexamminesodium Decahydro‐closo‐decaborate‐Ammonia(1/1), Cs[Na(NH3)6][B10H10]·NH3

Cs[Na(NH₃)₆][B₁₀H₁₀]·NH₃ was synthesised from cesium and disodium‐decahydro‐closo‐decaborate Na₂B₁₀H₁₀ in liquid ammonia, from which it crystallized in form of temperature sensitive colorless plates (triclinic, P1¯, a = 8.4787(7) Å, b = 13.272(1) Å, c = 17.139(2) Å, α = 88.564(1)°, β = 89.773(1)°, γ = 81.630(1)°, V = 1907.5(3) ų, Z = 4). The compound is the first example of an alkali metal boranate with two different types of cations. The decahydro‐closo‐decaborate dianions [B₁₀H₁₀]^2— and the cesium cations form a equation/tex2gif-stack-1.gif[Cs₂(B₁₀H₁₀)₂]^2— layer parallel to the ac plane. These layers are separated by N—H···N‐hydrogen bonded hexamminesodium cations.     

Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.     

Amorphous and nanocrystalline luminescent Si and Ge obtained via a solid-state chemical metathesis synthesis route

A new solid-state metathesis synthesis route was applied to obtain bulk samples of amorphous or microcrystalline Si and Ge. The method involves reaction of Zintl phases such as NaSi or NaGe, with ammonium or metal (e.g., CuCl, CoBr₂) halides. The driving force for the solid-state reaction is provided by the formation of alkali halides and the transition metals or metal silicides, or gaseous ammonia and hydrogen. The semiconductors were purified by washing to remove other solid products. The amorphous semiconductors were obtained in bulk form from reactions carried out at 200-300 °C. Syntheses at higher temperatures gave rise to microcrystalline semiconductors, or to micro-/nanocrystalline particles contained within the amorphous material. Similar crystalline/amorphous composites were obtained after heat treatment of bulk amorphous materials.     

Biologically active metabolites from fungi, 19: new isocoumarins and highly substituted benzoic acids from the endophytic fungus, Scytalidium sp

Six known metabolites, two new isocoumarins 4 and 8, and one new highly substituted benzoic acid derivative 9 were isolated from the ethyl acetate culture extract of a fungal endophyte, Scytalidium sp. In addition, another new benzoic acid 10 with an unusual 1,2-dicarbonyl side chain was indirectly identified from its methylated derivatives 10a-10d.     

Determination of selenium in human tissues by atomic absorption spectrometry

A simple method is described for the determination of selenium in human tissues without the use of perchloric acid. Digestion with nitric and sulphuric acids is followed by hydride generation and atomic absorption spectrometry. Results for NBS bovine liver and IAEA horse kidney reference materials were in good agreement with assigned concentrations, as was also achieved with the perchloric acid digestion. Recovery of added selenium was >90%, and the relative standard deviation was 5.5% for within-batch and 6.9% for between-batch analyses. The values of selenium in heart tissue were 0.9–1.3 μg g^?1 dry weight.     

Binuclear wirelike dimers based on ruthenium(II)-bipyridine units linked by ethynylene-oligothiophene-ethynylene bridges

The syntheses, structural characteristics, electrochemical behavior, ground-state spectra, photophysical properties, and transient absorption (TA) spectra in CH(3)CN solvent are reported for binuclear [(bpy)(2)Ru(bpy-E(T)(n)()E-bpy)Ru(bpy)(2)](4+) complexes, Ru(bpyT(n)bpy)Ru, where the Ru-based units are connected by alternating 3,4-dibutylthiophene (DBT')/thiophene (T') fragments linked via ethynyl groups (E) to bpy ligands at the 5-position (bpy is 2,2'-bipyridine). The ligand bpyT(3)bpy represents a module containing DBT'/T'/DBT' subunits, and bpyT(5)bpy accounts for a DBT'/T'/DBT'/T'/DBT' pattern. The syntheses and electrochemical and spectroscopic (emission and TA) properties in CH(2)Cl(2) solvent of the bpyT(n)()bpy ligands are likewise reported. The behavior of the Ru(bpyT(n)bpy)Ru dimers has been compared to that of the bpyT(n)bpy ligands and to that of a related mononuclear complex, [(bpy)(2)Ru(bpy-E-DBT')](2+), Ru(bpyDBT'). For the dimeric complexes, the electrochemical results show that the first reduction step takes place at the bpy ligand(s) bearing an ethynylene group, the first oxidation step is thiophene-centered, and further oxidation involves the metal centers, which are only weakly interacting. The photophysical and TA results for the Ru(bpyT(n)bpy)Ru dimers account for the presence of low-lying oligothiophene-centered (3)pi,pi levels, while higher-lying metal-ligand charge transfer ((3)MLCT) levels are thermally accessible only for the case of Ru(bpyT(3)bpy)Ru; the possible role of charge separation (CS) levels (from oxidation at the thiophene bridge and reduction at one of the coordinated bpy's) is also discussed.     

Charge heterogeneity of recombinant pro-urokinase and urinary urokinase, as revealed by isoelectric focusing in immobilized pH gradients

When analysing homogeneous preparations of recombinant pro-urokinase and urinary urokinase by isoelectric focusing (IEF) in immobilized pH gradients, an extreme charge heterogeneity was detected (at least ten major and ten minor bands in the pH range 7–10). This extensive polydispersity was not caused by different degrees of glycosylation, or by IEF artefacts, such as binding to carrier ampholytes or carbamylation by urea. A great part of this heterogeneity could be traced back to the existence of a multitude of protein molecules containing Cys residues at different oxidation levels (-SH, -S-S-, even cysteic acid). Owing to the very large number of Cys residues in pro-urokinase (24 out of a total of 411 amino acids) and to the relatively high pI of its native forms (pI 9.5–9.8; the native form is believed to contain all Cys residues as -S-S- bridges), the presence of SH or cysteic acid residues would increase the negative surface charge, as even SH groups would be extensively ionized. In pro-urokinase, part of the heterogeneity was also due to spontaneous degradation to urokinase and possibly also to cleavage into lower-molecular-mass fragments. When all these causes of heterogeneity were removed, the pI spectrum was reduced to only four, about equally intense, bands. The cause of this residual heterogeneity is unknown.     

Complexing equilibria and redox potentials of the Ag(II)/Ag(I) system in the presence of 2,2′:6′,2″-terpyridine in water

Summary The conditional protonation constants (=0.1) for 2,2:6,2-terpyridine, logK ₁=4.93, logK ₂=3.69, were determined by thepH-metric method. The compositions of complexes of Ag²⁺ and Ag⁺ ions with 2,2:6,2-terpyridine (tp) were studied and equilibria of the complex formation process were described. The values of conditional complex formation constants are as follows: for Ag(tp) ₂ ⁺ :log₀₁=5.79, log₀₂=9.68, for Ag(tp) ₂ ²⁺ :log₀₂=25.31, while the conditional constant of the Ag(tp)NO₃ precipitate formation is:K _SO=2.45·10⁴. Using coulometric and chronovoltamperometric measurements, the redox systems being formed in the complex solutions of Ag(II) and Ag(I) were determined and described including their formal potentials.

---

Komplexibildungsgleichgewichte und Redoxpotentiale des Systems Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Wasser

Zusammenfassung Mit Hilfe derpH-metrischen Methode wurden die konditionalen Protonationskonstanten (=0.1) von 2,2:6,2-Terpyridin bestimmt: logK ₁=4.93, logK ₂=3.69. Es wurde auch die Zusammensetzung der Komplexe von Ag(II) und Ag(I) mit 2,2:6,2-Terpyridin(tp) bestimmt sowie die Gleichgewichte der komplexbildung beschrieben. Die Werte der Konditionalkomplexbildungskonstanten sind: für Ag(tp) ₂ ⁺ :log₀₁=5.79, log₀₂=9.68, für Ag(tp) ₂ ²⁺ :log₀₂=25.31 und für das Löslichkeitsprodukt Ag(tp)NO₃:K _SO ^–1 =4.08·10^–5. Die in Komplexlösungen von Ag(II) und Ag(I) vorliegenden Redoxsysteme wurden mittels cyclischer Voltametrie und Coulometrie untersucht und die Formalpotentialwerte dieser Systeme in Wasser bestimmt.

     

Distillation, on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS as a new combination for the determination of methylmercury in sediments and fish tissue

 Distillation as a way of sample digestion has been combined with on-line RP C18 preconcentration and HPLC-UV-PCO-CVAAS (high performance liquid chromatography – ultra violet – post column oxidation – cold vapour atomic absorption spectrometry) for the determination of methylmercury at background levels in sediments, soils and fish tissue. To prove the accuracy of this method, it was applied to sediment and fish tissue reference materials. The results correspond with the reference values within their error ranges. Excellent recoveries (92–95%) were obtained for the sediment samples by means of the standard addition method. The standard deviations of the sediment samples were within an acceptable range (7.2–12.5%), those of the fish samples were substantially lower (3.4–5.0%). The detection limit is 0.04 ng/g for 1 g sample weight. Received: 23 November 1995/Revised: 16 April 1996/Accepted: 20 April 1996