Synthesis and Characterization of Multi‐Walled Carbon Nanotube/Polythiophene Composites

Multi‐walled carbon nanotube (MWCNT)/polythiophene (PTh) composites have been prepared by in situ chemical oxidative polymerization. PTh is synthesized onto the sidewalls of the MWCNTs, which play a role as hard templates for PTh to produce one‐dimensional nanostructures. The morphology and structures of the MWCNT/PTh composites are characterized by High‐resolution transmission electron microscopy, x‐ray diffraction, and Fourier transform infrared spectrometry. Their electrical property and thermal stability are determined using vector network analyzer and thermal gravimetric analyzer. Moreover, the mechanism of MWCNT/PTh nanowire formation is described. The studies show that the composites are nanowires with core‐shell structure, in which the outer shells and inner cores are formed by PTh and MWCNTs, respectively. The addition of MWCNTs does not change the backbone structure of PTh and affect the amorphous condition of PTh very slightly, however, it improves the electrical conductivity and thermal stability of PTh.     

Interphase Transport in an Emulsion: Tartaric Acid

The individual compounds in an emulsion of tartaric acid stabilized by a commercial surfactant, Laureth 4, were brought into contact in order to estimate the deviation from equilibrium conditions during emulsion evaporation. The transfer of compounds between the phases was followed by visual observation of new phases appearing and the movement of the interfaces with time. The results revealed that, conversely to the equilibrium processes in the corresponding salicylate emulsions, in the present system the dissolution of the acid was faster than the formation of birefringent structures and the variation of different colloidal structures could be followed in the experiment. A suitable choice of initial ratio between the three compounds enabled the transfer of compounds to result in an early depletion of the solid acid and subsequently information could be obtained about the relation between the transport of surfactant and water-acid solution into the birefringent layer. A significant dependence was found between the composition of the entrants into the layer and the amount of surfactant liquid remaining.     

Electrochemical separation of uranium and cerium in molten LiCl–KCl

The electrochemical separation of uranium from cerium in LiCl–KCl eutectic and the electrochemical behavior of Ce(III) were studied. According to the cyclic voltammogram of Ce(III) and the former result of U(III), electrodeposition potential was determined at ?1.65 V (vs Ag/AgCl). The uranium metal was successfully deposited and separated from cerium. The morphology of deposit and cross section of electrode were investigated by SEM, firstly uranium deposit alloys with stainless steel and forms a thin transition layer, and secondly the uranium metal layer grows from the transition layer. The separation factors of uranium/cerium on different recovery ratios were determined through a series of steps. It was found that the content of cerium in the deposit and separation factors declined with increasing the initial concentration of U³⁺ in molten salts; the separation factors remained stable at around 20 in different uranium recovery ratios.     

Study on sorption of U(VI) onto ordered mesoporous silicas

The mesoporous silicas (MCM-41 and MCM-48) are synthesized by hydrothermal method, which are characterized by XRD and BET techniques. The application of mesoporous silicas for the sorption of U(VI) from aqueous solution are studied by using batch technique under ambient condition. The effects of contact time, solid-to-liquid ratio (m/V), solution pH, ionic strength and temperature are determined, and the results indicate that the sorption of U(VI) to MCM-41 or MCM-48 are strongly dependent on pH values but independent of ionic strength. Compared with Langmuir model, the sorption isotherms can be simulated by Freundlich model well according to the high relative coefficients. The parameters for Langmuir and Freundlich sorption isotherms are calculated from the temperature at 298, 318 and 338 K, respectively, and the results suggest that the sorption of U(VI) on MCM-41 or MCM-48 is a spontaneous and exothermic process. In contrast to its sorption capacity for U(VI), MCM-48 is a suitable material for the preconcentration of U(VI) from large volumes of aqueous solutions.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

Microstructure transition of hydrophilic modified ibuprofen and Pluronic copolymer F127 complexes

The effect of the aggregation state of Pluronic copolymer (PEO₁₀₀–PPO₆₅–PEO₁₀₀, F127) and the concentration of hydrophilic modified ibuprofen (Ibuprofen–PEG800, IP800) on the interaction between F127 and IP800 was systematically investigated by nuclear magnetic resonance, dynamic light scatter (DLS), surface tension, and freeze-fractured transmission electron microscopy. In the solution of F127 unimers (5 °C), F127 unimers tended to wrap around IP800 micelles, and the binding model of F127 unimers to IP800 micelles transferred from wrapping around to partly threading through with increasing IP800 concentration. The latter binding model was straightly confirmed by nuclear Overhauser enhancement spectroscopy. As the aggregation state of F127 is in the beginning of the micellization (20 °C), the addition of IP800 significantly promoted the micellization of F127 to form the F127/IP800 complex with F127 micelles as the skeleton called the F127–micelle complex. The sudden decrease of the size obtained from DLS stemmed from the disruption of the F127–micelle complex and accompanying rehydration of PPO which is weaker compared with refs. The amount of IP800 to disintegrate the F127–micelle complex increased in the F127–micelle-dominated solution (40 °C) compared to that at 20 °C.     

Exon Array Analysis of Alternative Splicing of Genes in SOD1G93A Transgenic Mice

Alternative splicing is a common strategy for creating functional diversities of proteins. While conventional identification of splice variants generally targets individual genes in amyotrophic lateral sclerosis, we present a novel exon-centric array that allows genome-wide identification of splice variants and concurrently provides analysis of gene expression. Compare 1 was asymptomatic SOD1G93A transgenic mice with nontransgenic littermates; compare 2 was symptomatic with asymptomatic transgenic mice. RT-PCR was performed to validate. Pathway and GO analysis were performed on abnormal genes. These findings could guide us to demonstrated the potential influence of mutant human CuZn-SOD1 and of splicing regulation in pathological processes.     

Some experiments on complex spontaneous emulsification in the system water–benzene–ethanol

The system water–benzene–ethanol was used to illustrate the complexity of spontaneous emulsification, when water-poor emulsions are brought in contact with water. In the first case, an O/W emulsion located close to the plait point in the system was used. The aqueous phase in the emulsion was incompatible with water, and a strong spontaneous emulsification to an O/W between the two liquids took place in the water layer close to the interface between layers. In the second case, a W/O emulsion, also close to the plait point, was brought in contact with water. Now, the spontaneous emulsification between the water and the oil phase of the original emulsion to an O/W emulsion also took place in the water layer forming a distinct emulsion layer beneath the interface.     

Simultaneous extraction and determination of fluoroquinolones,tetracyclines and sulfonamides antibiotics in soils using optimised solid phase extraction chromatography-tandem mass spectrometry

An analytical method was developed for the simultaneous extraction and determination of 18 fluoroquinolones (FQs), tetracyclines (TCs) and sulfonamides (SAs) antibiotics from soils using solid phase extraction and liquid chromatography-tandem mass spectrometry. The soils were extracted by different solvents with the help of mechanical shaking and ultrasonic treatment at 59?kHz, followed by a strong anion exchange (SAX) cartridge to clean up soil samples and a hydrophilic lipophilic balance (HLB) cartridge as enrichment. The method was evaluated by testing the following variables: extraction solvents, the type of SPE cartridges, solvent volumes, initial spiking levels and soil types (silty clay loam and clay loam soils). The soil extraction method was validated using these two types of soils, representing two typical agricultural soils in northern China. For 2?g soil, the extraction steps with the mixture of potassium phosphate buffer and acetonitrile (ACN) (1/1, v/v, pH 3.2) provided satisfactory recoveries. In the clay loam soil, the recoveries of all the compounds were from 56% to 89% at the spiking level of 50?µg?kg^?1 soil, and from 69% to 97% at the spiking level of 200?µg?kg^?1 soil, respectively. Recoveries in silty clay loam soil were similar to that in clay loam. The method was successfully employed using soil samples collected from a farmland and afforestion area irrigated with sewage in northern China. The result indicates that trace antibiotics in sewage may accumulate in soil irrigated by river water containing sewage.     

Determination of Cr(VI) by portable tungsten coil electrothermal atomic absorption spectrometer after surfactant-assisted dispersive liquid-liquid microextraction

As a new developed instrument, a portable tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) was first coupled with surfactant assisted dispersive liquid–liquid microextraction (SA-DLLME) to improve its analytical performance and expand its applications in this work. SA-DLLME was very simple, rapid and the extraction efficiency was considerably improved by the effect of surfactant, which was suitable to be coupled with the portable instrument in field analysis. After SA-DLLME, concentrated chromium in organic phase was directly determined on W-coil atomiser. The influence factors relevant to SA-DLLME and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) for Cr(VI) was 0.016 µg L^?1, with sensitivity enhancement factor (EF) of 107. The relative standard deviation (RSD) for seven replicate measurements of 0.5 µg L^?1 of Cr(VI) was 4.6%. The recoveries for the spiked samples were in the acceptable range of 96.8–104%. The rapid, simple and high effective method greatly improved the sensitivity of this portable spectrometer for the determination of Cr(VI) and was applied to the analysis of ultra-trace Cr(VI) in real and certified water samples with satisfactory results.