Simultaneous determination of cyromazine,melamine and their biodegradation products by ion-pair high-performance liquid chromatography

An ion-pair high-performance liquid chromatography with ultraviolet detection method for the determination of cyromazine, melamine and its biodegradation products (ammeline, ammelide, cyanuric acid and biuret) was developed. C18 column was utilised to separate the six analytes with a mobile phase consisting of perchloric acid-ammonia solution and acetonitrile, under gradient elution and variable flow rate. The detection wavelengths were 205 nm for cyanuric acid and biuret and 222 nm for cyromazine, melamine, ammeline and ammelide. For analysis of sediment samples, the extraction solution containing acetonitrile, ammonia and water (80:10:10 by volume) was used to extract the analytes from sediment matrix. Using the extraction method for the spiked sediment sample, high linearity of matrix-matched standard curve could be obtained for the six analytes. The method detection limit was 0.1 μg g^?1 for melamine and cyromazine, 0.2 μg g^?1 for ammeline and ammelide, 1.2 μg g^?1 for cyanuric acid and 1.0 μg g^?1 for biuret in sediment matrix. The recoveries of these compounds were 70.1–98.3% and the relative standard deviations were 0.5–4.4%. Finally, the proposed method was successfully applied to the analysis of the sediment sample near the wastewater outlet of a melamine-producing factory.     

Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction

A novel Rh(III)-imprinted amino-functionalised silica gel sorbent was prepared by a surface imprinting technique for preconcentration and separation of Rh(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with the traditional solid sorbents and non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher adsorption capacity and selectivity for Rh(III). The maximum static adsorption capacity of the imprinted and non-imprinted sorbent for Rh(III) was 29.86?mg?g^?1 and 11.23?mg?g^?1, respectively. The imprinted Rh(III) was removed with 2?mL of 3% thiourea?+?2?mol?L^?1 HCl. The obtained imprinted particles exhibited excellent selectivity and rapid kinetics process for Rh(III). The relatively selective factor (α_r) values of Rh(III)/Ru(III), Rh(III)/Au(III), Rh(III)/Pt(IV), Rh(III)/Ir(IV), Rh(III)/Pd(II) were 26.7, 39.0 29.2, 28.1, 43.7, respectively, which were greater than 1. The detection limit (3σ) of the method was 0.26?µg?L^?1. The relative standard deviation of the method was 1.79% for eight replicate determination of 10?µg of Rh³⁺ in 200?mL water sample. The method was validated by analysing standard reference material (GBW 07293), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace rhodium(III) in geological samples with satisfactory results.     

A facile one-pot, three-component synthesis of 3,3′-(4-arylpyridine-2,6-diyl)bis(2H-chromen-2-one) derivatives under microwave irradiation

A series of 3,3′-(4-arylpyridine-2,6-diyl)bis(2H-chromen-2-one) derivatives have been synthesized by the one-pot, three-component reaction of 3-acetylcoumarin, an aromatic aldehyde, and ammonium acetate in acetic acid under microwave irradiation. This procedure has the major advantages of short reaction time, good yields, low energy consumption, easy operation, and environmental friendliness. All of the products were characterized by IR and NMR spectroscopy, MS, and elemental analysis.     

The (100) orientation evolution and temperature-dependent electrical properties of Bi(Zn1/2Ti1/2)O3–PbTiO3 ferroelectric films

The 0.2Bi(Zn_1/2Ti_1/2)O₃–0.8PbTiO₃ (0.2BZT–0.8PT) ferroelectric thin film was successfully fabricated on Pt(111)/Ti/SiO₂/Si substrates by a sol–gel method. The result indicates that the film exhibits the (100) preferred orientation and has a relatively dense and uniform microstructure with a thickness of ~230 nm. The formation mechanism of the oriented films was ascribed to the growth of the (100) oriented PbO layer at ~450 °C during a layer-by-layer crystallization process. Temperature-dependent electrical properties of the 0.2BZT–0.8PT films were investigated, showing that the film has a potential for high temperature applications.     

Polarization-controlled leakage current and photovoltaic effect in highly preferentially oriented BiFeO3 film

Highly preferentially oriented polycrystalline BiFeO₃ thin film was grown on FTO/glass substrate by a sol–gel method annealed at 500 °C. XRD result showed that the film adopts highly (100) preferential orientation. SEM results indicate that the film is composed of large grains of 40–200 nm and the thickness is about 320 nm. Room temperature saturated polarization and large Pr ~55 μC/cm² were obtained. Leakage current was substantially reduced by the controlling of ferroelectric polarization. Polarization-modulated conduction mechanism was studied. Moreover, substantial photovoltaic effect was observed.     

Synthesis of amine-modified mesoporous materials for CO2 capture by a one-pot template-free method

A one-pot template-free route was developed for the synthesis of novel tetraethylenepentamine modified porous silica as CO₂ adsorbents, the obtained materials were characterized by N₂ adsorption/desorption, thermogravimetry, elemental analysis, Fourier transform infrared spectrometry,scanning electron microscopy and transmission electron microscopy. It was found that the amine species were inserted into the silica skeleton, which considerably enhanced their dispersion. Compared with similar materials derived from impregnation, the porous structure of the silica can be better reserved, leading to a promising CO₂ adsorption capacity of 3.98 mmol CO₂/g-adsorbent and a fast adsorption kinetic in simulated flue gas at 348 K. The resulted adsorbents could also be easily regenerated and showed a good durability in multiple adsorption–desorption cycles. All these features make this method a promising option for the preparation of CO₂ adsorbents.     

Rational Design of an “OFF–ON” Phosphorescent Chemodosimeter Based on an Iridium(III) Complex and Its Application for Time‐Resolved Luminescent Detection and Bioimaging of Cysteine and Homocysteine

Biothiols, such as cysteine (Cys) and homocysteine (Hcy), play very crucial roles in biological systems. Abnormal levels of these biothiols are often associated with many types of diseases. Therefore, the detection of Cys (or Hcy) is of great importance. In this work, we have synthesized an excellent “OFF‐ON” phosphorescent chemodosimeter 1 for sensing Cys and Hcy with high selectivity and naked‐eye detection based on an Ir^III complex containing a 2,4‐dinitrobenzenesulfonyl (DNBS) group within its ligand. The “OFF‐ON” phosphorescent response can be assigned to the electron‐transfer process from Ir^III center and C^N ligands to the DNBS group as the strong electron‐acceptor, which can quench the phosphorescence of probe 1 completely. The DNBS group can be cleaved by thiols of Cys or Hcy, and both the ³M LCT and ³LC states are responsible for the excited‐state properties of the reaction product of probe 1 and Cys (or Hcy). Thus, the phosphorescence is switched on. Based on these results, a general principle for designing “OFF‐ON” phosphorescent chemodosimeters based on heavy‐metal complexes has been provided. Importantly, utilizing the long emission‐lifetime of phosphorescence signal, the time‐resolved luminescent assay of 1 in sensing Cys was realized successfully, which can eliminate the interference from the short‐lived background fluorescence and improve the signal‐to‐noise ratio. As far as we know, this is the first report about the time‐resolved luminescent detection of biothiols. Finally, probe 1 has been used successfully for bioimaging the changes of Cys/Hcy concentration in living cells.     

Strong Morphological Effect of Mn3O4 Nanocrystallites on the Catalytic Activity of Mn3O4 and Au/Mn3O4 in Benzene Combustion

Gold nanoparticles (3–4 nm) were deposited on Mn₃O₄ nanocrystallites with three distinct morphologies (cubic, hexagonal, and octahedral). The resulting structures were characterized, and their activities for benzene combustion were evaluated. The dominant exposed facets for the three kinds of Mn₃O₄ polyhedrons show the activity order: (103)≈(200)>(101). A similar activity order was derived for the interfaces between the Au and the Mn₃O₄ facet: Au/(200)≈Au/(103)>Au/(101). The metal–support interactions between the Au nanoclusters and specific facets of the Mn₃O₄ polyhedrons lead to a unique interfacial synergism in which the electronic modification of the Au nanoparticles and the morphology of the Mn₃O₄ substrate have a joint effect that is responsible for a significant enhancement in the catalytic activity of the Au/Mn₃O₄ system.     

Fully Synthetic Self‐Adjuvanting Thioether‐Conjugated Glycopeptide?Lipopeptide Antitumor Vaccines for the Induction of Complement‐Dependent Cytotoxicity against Tumor Cells

Glycopeptides of tumor‐associated mucin MUC1 are promising target structures for the development of antitumor vaccines. Because these endogenous structures were weakly immunogenic, they were coupled to immune‐response‐stimulating T‐cell epitopes and the Pam₃Cys lipopeptide to induce strong immune responses in mice. A new thioether‐ligation method for the synthesis of two‐ and three‐component vaccines that contain MUC1 glycopeptides as the B‐cell epitopes, a T‐cell epitope peptide, and the Pam₃CSK₄ lipopeptide is described. The resulting fully synthetic vaccines were used for the vaccination of mice, either in a liposome with Freund′s adjuvant or in aqueous PBS buffer. The three‐component vaccines that contained the Tetanus Toxoid P2 T‐cell epitope peptide induced strong immune responses, even when administered just in PBS. By activation of the complement‐dependent cytotoxicity (CDC) complex, the antisera induced the killing of tumor cells.     

Structure–Reactivity Relationships in the Hydrogenation of Carbon Dioxide with Ruthenium Complexes Bearing Pyridinylazolato Ligands

Pyridinylazolato (N–N′) ruthenium(II) complexes of the type [(N–N′)RuCl(PMe₃)₃] have been obtained in high yields by treating the corresponding functionalised azolylpyridines with [RuCl₂(PMe₃)₄] in the presence of a base. ¹⁵N NMR spectroscopy was used to elucidate the electronic influence of the substituents attached to the azolyl ring. The findings are in agreement with slight differences in the bond lengths of the ruthenium complexes. Furthermore, the electronic nature of the azolate moiety modulates the catalytic activity of the ruthenium complexes in the hydrogenation of carbon dioxide under supercritical conditions and in the transfer hydrogenation of acetophenone. DFT calculations were performed to shed light on the mechanism of the hydrogenation of carbon dioxide and to clarify the impact of the electronic nature of the pyridinylazolate ligands.