LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Erratum: Yan Guo. Boltzmann diffusive limit beyond the Navier‐Stokes approximation,Communications on Pure and Applied Mathematics (2006) 59(5) 626‐687

The original article to which this erratum refers was published in Communications on Pure and Applied Mathematics Comm Pure Appl Math(2006)59(5) 626 .     

G-网络排队系统的研究新进展

在研究排队网络的文献中,G-网络(即推广的排队网络)最近受到了国际学者广泛的关注,它的研究在一定程度上丰富了排队网络的内容.正因为有很多学者投入到此项研究中,新的结果是层出不穷的.本文简短地介绍G-网络近年来的发展.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.     

Multiband Terahertz Photonic Band Gaps of Subwavelength Planar Fractals

Optical transmission properties of subwavelength planar fractals in terahertz （THz） frequency regime are studied by means of time-domain spectroscopy. The transmission spectra with multiple pass bands and stop bands are observed. The tunable photonic band gaps are realized by changing the angle between the principle axis of planar fractal and the polarization of THz wave. The possible application of the subwavelength optical component is discussed. We attribute the detected transmittance from subwavelength fractals to localized resonances.     

500.8 nmNd∶YAG青光激光器光学薄膜的设计与制备

从双波长激光运转及和频的机理出发，对LD泵浦Nd∶YAG，LBO腔内和频500.8 nm〖JP2〗青光激光器所使用的光学薄膜进行了设计和制备.在激光反射镜的设计上，为了达到最佳的和频输出，对膜系要求进行了深入分析.采用对谐振腔一端面反射率固定不变并通过对另一腔镜基频光的透射率进行调谐的方法, 在给出合理初始结构后，利用计算机对膜厚进行了优化.并采用双离子束溅射沉积的方法，通过时间监控膜厚法成功制备出青光激光器所使用的全介质激光反射膜, 在室温下实现946 nm和1064 nm双波长连续运转，并通过Ⅰ类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4 W时和频青光最大输出达20 mW.     

关于由衍射片的背面反射光形成的衍射图样的讨论

在光的衍射实验中,我们看到的一般是由通过衍射片的直射光形成的衍射图样,但在衍射片的另一面,同样存在着另一个衍射图样,它是由衍射片的背面反射光形成的,两个衍射图样关于衍射片对称.本文给出了这种实验现象,并用巴比涅原理解释了这种现象.     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

KNSBN晶体猫式互抽动相位共轭光特性

在KNSBN：Ce晶体中，利用二波耦合作用，在单一光束无法获得相位共轭光的条件下，实现了“猫”式互抽运相位共轭光输出，获得较高的共轭光发射率，实验结果表明，晶体的二波耦合作用可以使晶体的自抽运相位共轭光的阈值光强降低。入射光的入射角范围增大，响应时间缩短。