Study on glucose oxidase fermentation coupled with membrane dialysis

The repression of glucose oxidase (GOD) biosynthesis by catabolites during fermentation can be alleviated through membrane dialysis fermentation (MDF). The results show that the volumetric enzyme productivity of MDF was two times higher than that of the control (fermentation without dialysis), and its total enzyme activity was increased by 30–50%. The operation conditions of MDF, such as pore size of the membrane, initiating time for membrane dialysis, and volume of dialysate used, were optimized. The content of amino acids and organic acids in the fermentation broth and the dialysate in the reservoir were assessed by amino acid analyzer and ionic chromatography, respectively. The relationship among the contents of pyruvic acid, gluconic acid, and enzyme activity during fermentation was analyzed quantitatively. Furthermore, the effect of membrane dialysis technology applied to the low-yield strain was found to be more effective than that applied to the high-yield strain.     

硒化合物对不饱和脂肪酸过氧自由基的作用

本文用电子自旋共振谱技术研究了硒代二乙酸和硒代二丙酸对不饱和脂肪酸过氧自由基的作用。结果表明,硒化合物清除不饱和度为2和2以上的脂肪酸的过氧自由基,但促进仅含一个双键的不饱和脂肪酸的过氧自由基的生成。     

Double-Label Simultaneous Time-Resolved Fluoroimmunoassay of Phenytoin and Phenobarbital

A procedure for the simultaneous time-resolved fluoroimmunoassay for phenobarbital and phenytoin, based on the use of europium- and samarium-labeled haptens, has been investigated. These lanthanide ions are bound to the haptens by means of the anhydride of diethylenetriaminepentaacetic acid. The antibody is immobilized onto immunoplate in which samples are assayed in competitive immunoassay. After the immunoreactions and dissociation with a fluorescence enhancement solution, the fluorescence intensity is measured. The detection limits of the assay are, respectively, 20 ng/ml for phenobarbital and 50 ng/ml for phenytoin. Results obtained with the proposed methods correlate well (CV <10%). The inter-reactions between phenobarbital, phenytoin, and their antibodies are studied.     

紫荆花红色素开发利用的研究

首次报道紫荆花红色素的提取纯化方法及红色素的理化性质，并与玫瑰茄红色素作对比研究，证实同属于花青甙类化合物，又经急性毒性试验证明其毒性极低，故紫荆花天然红色素具有开发利用的价值。     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.