Rotational bands in the doubly odd 130Cs nucleus

The band structures built on the 5^- isomeric state ( T _1/2 = 3.46 m) in the doubly odd ¹³⁰Cs nucleus have been established up to I = 24? via the ¹²⁴Sn(¹¹B, 5n)¹³⁰Cs reaction. The previously observed bands based on the πh _11/2⊗νh _11/2, πg _7/2⊗νh _11/2 and πd _5/2⊗νh _11/2 configurations and a positive-parity side band with multiple connections to the α = 0 signature partner of the yrast πh _11/2⊗νh _11/2 band have been extended to higher spins. A new band based on the πh _11/2⊗νg _7/2 configuration is observed. The yrast πh _11/2⊗νh _11/2 band exhibits anomalous signature splitting whose magnitude decreases up to spin 15 and then increases without restoring the normal signature splitting. Received: 20 February 2001 / Accepted: 9 May 2001     

Plasma-induced graft copolymerization of poly(methacrylic acid) on electrospun poly(vinylidene fluoride) nanofiber membrane

Electrospun nanofibrous membranes (ENM) which have a porous structure have a huge potential for various liquid filtration applications. In this paper, we explore the viability of using plasma-induced graft copolymerization to reduce the pore sizes of ENMs. Poly(vinylidene) fluoride (PVDF) was electrospun to produce a nonwoven membrane, comprised of nanofibers with diameters in the range of 200-600 nm. The surface of the ENM was exposed to argon plasma and subsequently graft-copolymerized with methacrylic acid. The effect of plasma exposure time on grafting was studied for both the ENM and a commercial hydrophobic PVDF (HVHP) membrane. The grafting density was quantitatively measured with toluidine blue-O. The degree of grafting increased steeply with an increase in plasma exposure time for the ENM, attaining a maximum of 180 nmol/mg after 120 s of plasma treatment. However, the increase in the grafting density on the surface of the HVHP membrane was not as drastic, reaching a plateau of 65 nmol/mg after 60 s. The liquid entry permeation of water dropped extensively for both membranes, indicating a change in surface properties. Field emission scanning electron microscopy micrographs revealed an alteration in the surface pore structure for both membranes after grafting. Bubble point measurements of the ENM reduced from 3.6 to 0.9 um after grafting. The pore-size distribution obtained using the capillary flow porometer for the grafted ENM revealed that it had a similar profile to that of a commercial hydrophilic commercial PVDF (HVLP) membrane. More significantly, water filtration studies revealed that the grafted ENM had a better flux throughput than the HVLP membrane. This suggests that ENMs can be successfully engineered through surface modification to achieve smaller pores while retaining their high flux performance.     

Application of classical transportation methods to find the fuzzy optimal solution of fuzzy transportation problems

To the best of our knowledge till now there is no method in the literature to find the exact fuzzy optimal solution of unbalanced fully fuzzy transportation problems. In this paper, the shortcomings and limitations of some of the existing methods for solving the problems are pointed out and to overcome these shortcomings and limitations, two new methods are proposed to find the exact fuzzy optimal solution of unbalanced fuzzy transportation problems by representing all the parameters as LR flat fuzzy numbers. To show the advantages of the proposed methods over existing methods, a fully fuzzy transportation problem which may not be solved by using any of the existing methods, is solved by using the proposed methods and by comparing the results, obtained by using the existing methods and proposed methods. It is shown that it is better to use proposed methods as compared to existing methods.     

Isolation,Purification, and Characterization of Antimicrobial Compound 6-[1,2-dimethyl-6-(2-methyl-allyloxy)-hexyl]-3-(2-methoxy-phenyl)-chromen-4-one from Penicillium sp. HT-28

A fungal culture (Penicillium sp., HT-28), isolated from soil has been evaluated for its bioactivity, which showed broad spectrum antimicrobial activity and was effective against methicillin-resistant Staphylococcus aureus (MRSA) also. Statistical optimization of the medium by response surface methodology (RSM) enhanced the antimicrobial activity up to 1.8-fold. Column chromatography was used to isolate the active compound (A), which was characterized to be 6-[1,2-dimethyl-6-(2-methyl-allyloxy)-hexyl]-3-(2-methoxy-phenyl)-chromen-4-one by various spectroscopic techniques such as infrared (IR), ¹H and ¹³C nuclear magnetic resonance (NMR) spectra, and mass spectroscopy. Minimum inhibitory concentration (MIC) of the active compound (A) ranged from 0.5 to 15 μg/mL. Viable cell count studies of the active compound (A) showed S. aureus, Escherichia coli, Staphylococcus epidermidis, and Salmonella typhimurium 1 to be the most sensitive. The compound retained its bioactivity after treating it at 100 °C for 1 h. Furthermore, the compound (A) when tested for its biosafety was found neither to be cytotoxic nor mutagenic. The study demonstrated that an apparently novel compound isolated from Penicillium sp. (HT-28) seems to be a stable and potent antimicrobial.     

Physicochemical properties and bio-interfacial interactions of surface modified PDLLA-PAMAM linear dendritic block copolymers

Here, we demonstrate the applicability of self-assembling linear-dendritic block copolymers (LDBCs) and their nanoaggregates possessing varied surfaces as therapeutic nanocarriers. These LDBCs are comprised of a hydrophobic, linear polyester chemically coupled to a hydrophilic dendron polyamidoamine (PAMAM)—the latter of which acts as the surface of the self-assembled nanoaggregate in aqueous media. To better understand how surface charge density affects the overall operability of these nanomaterials, we modified the nanoaggregate surface to yield cationic (NH₃⁺), neutral (OH), and anionic (COO⁻) surfaces. The effect of these modifications on the physicochemical properties (i.e., size, morphology, and surface charge density), colloidal stability, and cellular uptake mechanism of the polymeric nanocarrier were investigated. This comparative study demonstrates the viability of nanoaggregates formed from PDLLA-PAMAM LDBCs to serve as nanocarriers for applications in drug delivery.     

Synthesis,characterization, and organocatalytic application of chiral ionic liquids derived from (S,R)-noscapine

(S,R)-Noscapine, a phthalideisoquinoline alkaloid has been used as precursor for the synthesis of chiral ionic liquids (CILs). Noscapine based CILs have been synthesized from reaction between (S,R)-noscapine and methyl iodide in acetonitrile at room temperature. The synthesized CILs have been characterized by ¹H NMR, ¹³C NMR, EI-MS, and polarimetry techniques. These CILs have been used as organocatalysts in the enantioselective reduction of prochiral ketones to produce optically active secondary alcohols. The optically active secondary alcohols have been obtained with excellent yields and low to moderate enantiomeric excess (ee); also the complete enantiomeric excess (100% ee) has been achieved in some cases.     

Theoretical studies on the conformations of selenamides

Ab initio HF/6-31+G*, MP2/6-31+G*, B3LYP/6-31+G* level calculations have been performed on HSe-NH₂ to estimate the Se-N rotational barriers and N-inversion barriers. Two conformers have been found withsyn andanti arrangement of the NH₂ hydrogens with respect to Se-H bond. The N inversion barriers in selenamide are 1.65, 2.47, 1.93 kcal/mol and the Se-N rotational barriers are 6.58, 6.56 and 6.12 kcal/mol respectively at HF/6-31+G*, MP2/6-31+G* and B3LYP/6-31+G* levels respectively. The n_N →Σ *_Se-H negative hyperconjugation is found to be responsible for the higher rotational barriers.     

Efficient synthesis of (−)-(R)- and (+)-(S)-rolipram

A novel, efficient and protecting group free enantioselective synthetic approach of (?)-(R)-1 and (+)-(S)-rolipram 2 is described employing the organocatalyzed asymmetric Michael addition, Henry condensation, Wittig olefination and reductive lactamization reactions as key steps.     

Response Surface Optimization of Medium Components for Naringinase Production from <Emphasis Type="Italic">Staphylococcus xylosus MAK2</Emphasis>

Response surface methodology was used to optimize the fermentation medium for enhancing naringinase production by Staphylococcus xylosus. The first step of this process involved the individual adjustment and optimization of various medium components at shake flask level. Sources of carbon (sucrose) and nitrogen (sodium nitrate), as well as an inducer (naringin) and pH levels were all found to be the important factors significantly affecting naringinase production. In the second step, a 22 full factorial central composite design was applied to determine the optimal levels of each of the significant variables. A second-order polynomial was derived by multiple regression analysis on the experimental data. Using this methodology, the optimum values for the critical components were obtained as follows: sucrose, 10.0%; sodium nitrate, 10.0%; pH 5.6; biomass concentration, 1.58%; and naringin, 0.50% (w/v), respectively. Under optimal conditions, the experimental naringinase production was 8.45 U/mL. The determination coefficients (R ²) were 0.9908 and 0.9950 for naringinase activity and biomass production, respectively, indicating an adequate degree of reliability in the model.     

Cell Disruption Optimization and Covalent Immobilization of β-D-Galactosidase from <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> YW-1 for Lactose Hydrolysis in Milk

β-D-galactosidase (EC 3.2.1.23) from Kluyveromyces marxianus YW-1, an isolate from whey, has been studied in terms of cell disruption to liberate the useful enzyme. The enzyme produced in a bioreactor on a wheat bran medium has been successfully immobilized with a view to developing a commercially usable technology for lactose hydrolysis in the food industry. Three chemical and three physical methods of cell disruption were tested and a method of grinding with river sand was found to give highest enzyme activity (720 U). The enzyme was covalently immobilized on gelatin. Immobilized enzyme had optimum pH and temperature of 7.0 and 40 °C, respectively and was found to give 49% hydrolysis of lactose in milk after 4 h of incubation. The immobilized enzyme was used for eight hydrolysis batches without appreciable loss in activity. The retention of high catalytic activity compared with the losses experienced with several previously reported immobilized versions of the enzyme is significant. The method of immobilization is simple, effective, and can be used for the immobilization of other enzymes.