Dendrophanes: Water-soluble dendritic receptors as models for buried recognition sites in globular proteins

Water-soluble dendritic cyclophanes (dendrophanes) of first ( 1 , 4 ), second ( 2 5 ), and third generation ( 3 6 ) with poly(ether amide) branching and 12, 36, and 108 terminal carboxylate groups, respectively, were prepared by divergent synthesis, and their molecular recognition properties in aqueous solutions were investigated. Dendrophanes 1 – 3 incorporate as the initiator core a tetraoxa[6.1.6.1]paracyclophane 7 with a suitably sized cavity for inclusion complexation of benzene or naphthalene derivatives. The initiator core in 4 – 6 is the [6.1.6.1]cyclo-phane 8 shaped by two naphthyl(phenyl) methane units with a cavity suitable for steroid incorporation. The syntheses of 1 – 6 involved sequential peptide coupling to monomer 9 , followed by ester hydrolysis (Schemes 1 and 4), Purification by gel-permeation chromatography (GPC; Fig. 3) and full spectral characterization were accomplished at the stage of the intermediate poly(methyl carboxylates) 10 – 12 and 23 – 25 , respectively. The third-generation 108-ester 25 was also independently prepared by a semi-convergent synthetic strategy, starting from 4 (Scheme 5). All dendrophanes with terminal ester groups were obtained in pure form according to the ¹³C-NMR spectral criterion (Figs, 1 and 5). The MALDI-TOF mass spectra of the third-generation derivative 25 (mol. wt. 19328 D) displayed the molecular ion as base peak, accompanied by a series of ions [M – n(1041 ± 7)]⁺, tentatively assigned as characteristic fragment ions of the poly(ether amide) cascade. A similar fragmentation pattern was also observed in the spectra of other higher-generation poly(ether amide) dendrimers. Attempts to prepare monodisperse fourth-generation dendrophanes by divergent synthesis failed. ¹H-NMR and fluorescence binding titrations in basic aqueous buffer solutions showed that dendrophanes 1 – 3 complexed benzene and naphthalene derivatives, whereas 4 – 6 bound the steroid testosterone. Complexation occurred exclusively at the cavity-binding site of the central cyclophane core rather than in fluctuating voids in the dendritic branches, and the association strength was similar to that of the complexes formed by the initiator cores 7 and 8 , respectively (Tables 1 and 3). Fluorescence titrations with 6-(p-toluidino)naphthalene-2-sulfonate as fluorescent probe in aqueous buffer showed that the micropolarity at the cyclophane core in dendrophanes 1 - 3 becomes increasingly reduced with increasing size and density of the dendritic superstructure; the polarity at the core of the third-generation compound 3 is similar to that of EtOH (Table 2). Host-guest exchange kinetics were remarkably fast and, except for receptor 3 , the stabilities of all dendrophane complexes could be evaluated by ¹H-NMR titrations. The rapid complexation-decomplexation kinetics are explained by the specific attachment of the dendritic wedges to large, nanometer-sized cyclophane initiator cores, which generates apertures in the surrounding dendritic superstructure.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Primary photodamage sites and mitochondrial events after Foscan photosensitization of MCF-7 human breast cancer cells

To determine the initial photodamage sites of Foscan-mediated photodynamic treatment, we evaluated the enzymatic activities in selected organelles immediately after light exposure of MCF-7 cells. The measurements indicated that the enzymes located in the Golgi apparatus (uridine 5'-diphosphate galactosyl transferase) and in the endoplasmic reticulum (ER) (nicotinamide adenine dinucleotide [reduced] [NADH] cytochrome c [cyt c] reductase) are inactivated by the treatment, whereas mitochondrial marker enzymes (cyt c oxidase and dehydrogenases) were unaffected. This indicates that the ER and the Golgi apparatus are the primary intracellular sites damaged by Foscan-mediated PDT in MCF-7 cells. We further investigated whether the specific mitochondria events could be associated with Foscan photoinduced cell death. The dose response profiles of mitochondrial depolarization and cytochrome c release immediately after Foscan-based PDT were very different from that of overall cell death. By 24 h post-PDT the fluence dependency was strikingly similar for both mitochondrial alterations and cell death. Therefore, although mitochondria are not directly affected by the treatment, they can be strongly implicated in Foscan-mediated MCF-7 cell death by late and indirect mechanism.     

Synthesis and deprotonation of 2-(pyridyl)phenols and 2-(pyridyl)anilines

2-(2- and 3-Pyridyl)anilines (1, 2), 2,2-dimethyl-N-[2-(2- and 3-pyridyl)phenyl]propanamides (3, 4), and 2-, 3- and 4-(2-methoxyphenyl)pyridines (7-9) are readily synthesized using cross-coupling reactions. Whereas the amines 1, 2 undergo side reactions, the corresponding amides 3, 4 are deprotonated with lithium 2,2,6,6-tetramethylpiperidide (LTMP): the compound 3 at C6' under in situ quenching, and the compound 4 at C4'. When the ether 7 is subjected to the same reagent, lithiation occurs at C6'.     

A general strategy for the diastereoselective synthesis of 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane lignans

A strategy for the stereoselective synthesis of all the possible diastereoisomers of the 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane (furofuran) lignans from a single dihydrofuran precursor is described. The key steps involve a diastereocontrolled templated cationic cyclization followed by stereoselective reduction of the resulting methyl glycoside.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Isotachophoretic analysis of the dihydrofolate reductase reaction in the presence of methotrexate and ascorbic acid

The antifolate methotrexate (MTX) is widely used in cancer chemotherapy. In this study, we show that MTX (MTX-Glu1) and MTX-polyglutamates (MTX-Glu2-5) strongly inhibited the growth of the leukemic cell line MOLT-4. This effect, however, was mitigated by ascorbic acid. We investigated whether ascorbic acid is able to reduce dihydrofolic acid (DHF) to tetrahydrofolic acid (THF) directly or by circumventing the MTX inhibition of dihydrofolate reductase (DHFR). The inhibition of this NADPH-dependent reduction of DHF by MTX-Glun in the absence or presence of ascorbate, was determined by analytical isotachophoresis. Using 0.01 M HCl/histidine, pH 6.0, as a leading electrolyte (L) and 0.005 M 2-(N-morpholino)ethanesulfonic acid (MES)/histidine, pH 6.0, as a terminating electrolyte (T), MTX-Glun derivatives including MTX-Glu1 could be easily separated, whereas the quantitative estimation of THF was not possible. A quantitative characterization of the DHFR reaction by measuring NADPH, NADP+ and ascorbate was achieved with another system (L: 0.01 M HCI/beta-alanine, pH 3.73; T: 0.01 M caproic acid, pH 3.27). Nanomolar concentrations of MTX-Glu1-5 inhibited consumption of NADPH and production of NADP+. Ascorbic acid was not able to reduce DHF, neither directly nor after inhibition of DHFR by MTX. However, ascorbic acid seemed to diminish the oxidation of THF and this may account for its capacity to reduce the inhibitory effect of MTX on MOLT-4 cells.     

L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.