Bimetallic Co–Ni/TiO<Subscript>2</Subscript> catalysts for selective hydrogenation of cinnamaldehyde

Bimetallic Co–Ni catalysts in the composition range Co_(1?x)Ni_x with x?=?0.0, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0, with total metal loading of 15% w/w and supported on TiO₂-P25, have been prepared by chemical reduction of the metal acetates by glucose in aqueous alkaline medium and characterized by XRD, TEM, TPR, XPS and H₂-TPD techniques. Selective hydrogenation of cinnamaldhyde (CAL) to hydrocinnamaldehyde (HCAL), cinnamyl alcohol (COL) and hydrocinnamyl alcohol (HCOL) has been investigated at 20 bar pressure, in the temperature range 120–140 °C. Co/Ni crystallite sizes in the range 6.0?±?1 nm are observed by TEM. TPR and XPS results indicate the formation of nanoscale Co–Ni alloys, which tend to weaken M–H bond strength, as revealed by H₂-TPD measurements. Ni/TiO₂ displays very high conversion of CAL (86.9%) with high selectivity (78.7%) towards HCAL formation at 140 °C. Co/TiO₂, on the other hand, exhibits relatively lower CAL conversion (55%) and higher selectivity (61.3%) for COL formation at the same temperature. However, bi-metallic Co–Ni catalysts in the composition range x?=?0.3–0.6 display very high conversion (>?98%) due to alloy formation and weakening of M–H bonds. Bimetallic Co_0.7Ni_0.3 catalyst displays high conversion of CAL (98.1%) and high selectivity (82.9%) towards HCOL. Overall CAL hydrogenation activity at 140 °C, when expressed as TOF, displays a maximum value at the composition Co_0.5Ni_0.5. Activity and selectivity patterns have been rationalized based on the reaction pathways observed on the catalysts and the influence of Co–Ni alloy formation and M–H bond strength. Thus, a synergetic effect, originating from an appropriate composition of base metal catalysts and reaction conditions, could result in hydrogenation activity comparable with noble metal based catalysts.     

Biocompatible functionalization of polymersome surfaces: a new approach to surface immobilization and cell targeting using polymersomes

Vesicles assembled from amphiphilic block copolymers represent promising nanomaterials for applications that include drug delivery and surface functionalization. One essential requirement to guide such polymersomes to a desired site in vivo is conjugation of active, targeting ligands to the surface of preformed self-assemblies. Such conjugation chemistry must fulfill criteria of efficiency and selectivity, stability of the resulting bond, and biocompatibility. We have here developed a new system that achieves these criteria by simple conjugation of 4-formylbenzoate (4FB) functionalized polymersomes with 6-hydrazinonicotinate acetone hydrazone (HyNic) functionalized antibodies in aqueous buffer. The number of available amino groups on the surface of polymersomes composed of poly(dimethylsiloxane)-block-poly(2-methyloxazoline) diblock copolymers was investigated by reacting hydrophilic succinimidyl-activated fluorescent dye with polymersomes and evaluating the resulting emission intensity. To prove attachment of biomolecules to polymersomes, HyNic functionalized enhanced yellow fluorescent protein (eYFP) was attached to 4FB functionalized polymersomes, resulting in an average number of 5 eYFP molecules per polymersome. Two different polymersome-antibody conjugates were produced using either antibiotin IgG or trastuzumab. They showed specific targeting toward biotin-patterned surfaces and breast cancer cells. Overall, the polymersome-ligand platform appears promising for therapeutic and diagnostic use.     

Correlation between Dynamic Heterogeneity and Local Structure in a Room‐Temperature Ionic Liquid: A Molecular Dynamics Study of [bmim][PF6]

The complex dynamics of a room‐temperature ionic liquid, 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), is studied using equilibrium classical molecular dynamics simulations in the temperature range of 250–450 K. The activation energies for the self‐diffusion of ions are around 30–34 kJ mol^?1, with that of the anion a little higher than that for the cation. The electrical conductivity of the liquid is calculated and good agreement with experiments is obtained. Structural relaxation is studied through the decay of coherent (total density–density correlation) and incoherent (self part of density–density correlation) intermediate scattering functions over a range of temperatures and wave vectors relevant to the system. The relaxation data are used to identify and characterize two processes, α and β. The dependence of the two relaxation times on temperature and wave vector is obtained. The dynamical heterogeneity of the ions determined through the non‐Gaussian parameter indicates the motion of the cation to be more heterogeneous than that of the anion. The faster ones among the cations are coordinated to faster anions, while slower cations are surrounded predominantly by slower anions. Thus, the dynamical heterogeneity in this ionic liquid is shown to have structural signatures.     

High-energy and high-power Li-rich nickel manganese oxide electrode materials

A lithium-rich nickel-manganese oxide compound Li_x(Ni_0.25Mn_0.75)O_y (x > 1) was synthesized from layered Na_0.9Li_0.3Ni_0.25Mn_0.75O_δ precursor using a lithium ion-exchange reaction. The electrochemical behavior of the material as a cathode for lithium batteries, and a preliminary discussion of its structure are reported. The product Li_1.32Na_0.02Ni_0.25Mn_0.75O_y (IE-LNMO) shows broad X-ray diffraction peaks, but possesses a high intensity sharp (003) layering peak and multiple peaks with intensity in the 20–23° 2θ region which suggest Ni–Mn ordering in the transition metal layer (TM). Li/IE-LNMO cells demonstrate very stable reversible capacities of 220 mAh/g @ 15 mA/g and possess extremely high power of 150 mAh/g @ 1500 mA/g (15C). The Li/IE-LNMO cell dQ/dV plot exhibits three reversible electrochemical processes due to Ni/Mn redox behavior in a layered component, and Mn redox exchange in a spinel component. No alteration in the dQ/dV curves and no detectable change in the voltage profiles over 40 cycles were observed, thus indicating a stable structure for lithium insertion/extraction. This new material is attractive for demanding Li-ion battery applications.     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

Rational synthesis of beta-substituted chlorin building blocks

Chlorins bearing synthetic handles at specific sites about the perimeter of the macrocycle constitute valuable building blocks. We previously developed methodology for preparing meso-substituted chlorin building blocks and now present methodology for preparing several complementary beta-substituted chlorin building blocks. The chlorins bear one or two beta substituents, one meso substituent, a geminal dimethyl group to lock in the chlorin hydrogenation level, and no flanking meso and beta substituents. The synthesis involves convergent joining of an Eastern half and a Western half. New routes have been developed to two beta-substituted bromo-dipyrromethane monocarbinols (Eastern halves). A new beta-substituted Western half was prepared following the method for preparing an unsubstituted Western half (3,3-dimethyl-2,3-dihydrodipyrrin). Chlorin formation is achieved by a two-flask process of acid-catalyzed condensation followed by metal-mediated oxidative cyclization. beta-Substituted chlorins have been prepared in 18-24% yield bearing a 4-iodophenyl group at the 8-position, a 4-iodophenyl group or a 4-[2-(trimethylsilyl)ethynyl]phenyl group at the 12-position, and a 4-iodophenyl group and a 4-[2-(trimethylsilyl)ethynyl]phenyl group at diametrically opposed beta-positions (2, 12). The latter building block makes possible the stepwise construction of linear multi-chlorin architectures. The chlorins exhibit typical absorption and fluorescence spectra. A systematic shift in the absorption maximum (637-655 nm for the free base chlorins, 606-628 nm for the zinc chlorins) and intensity of the chlorin Q(y)() band (epsilon up to 79 000 M(-)(1) cm(-)(1)) is observed depending on the location of the substituents. The characteristic spectral features and location of substituents in defined positions make these chlorins well suited for a variety of applications in biomimetic and materials chemistry.