Zone-refinement effect in small molecule-polymer blend semiconductors for organic thin-film transistors

The blend films of small-molecule semiconductors with insulating polymers exhibit not only excellent solution processability but also superior performance characteristics in organic thin-film transistors (OTFTs) over those of neat small-molecule semiconductors. To understand the underlying mechanism, we studied triethylsilylethynyl anthradithiophene (TESADT) with small amounts of impurity formed by weak UV exposure. OTFTs with neat impure TESADT had drastically reduced field-effect mobility (<10(-5) cm(2)/(V s)), and a disappearance of the high-temperature crystal phase was observed for neat impure TESADT. However, the mobility of the blend films of the UV-exposed TESADT with poly(α-methylstyrene) (PαMS) is recovered to that of a fresh TESADT-PαMS blend (0.040 cm(2)/(V s)), and the phase transition characteristics partly return to those of fresh TESADT films. These results are corroborated by OTFT results on "aged" TIPS-pentacene. These observations, coupled with the results of neutron reflectivity study, indicate that the formation of a vertically phase-separated layer of crystalline small-molecule semiconductors allows the impurity species to remain preferentially in the adjacent polymer-rich layer. Such a "zone-refinement effect" in blend semiconductors effectively removes the impurity species that are detrimental to organic electronic devices from the critical charge-transporting interface region.     

1,3-Diamido-calix[4]arene conjugates of amino acids: recognition of -COOH side chain present in amino acids, peptides, and proteins by experimental and computational studies

Lower rim 1,3-diamido conjugates of calix[4]arene have been synthesized and characterized, and the structures of some of these have been established by single crystal XRD. The amido-calix conjugates possessing a terminal -COOH moiety have been shown to exhibit recognition toward guest molecules possessing -COOH moiety, viz., Asp, Glu, and reduced and oxidized glutathione (GSH, GSSG), by switch-on fluorescence in aqueous acetonitrile and methanol solutions when compared to the control molecules via forming a 1:1 complex. The complex formed has been shown by mass spectrometry, and the structural features of the complexes were derived on the basis of DFT computations. The association constants observed for the recognition of Asp/Glu by Phe-calix conjugate, viz., 532/676 M(-1), are higher than that reported for the recognition of Val, Leu, Phe, His, and Trp (16-63 M(-1)) by a water-soluble calixarene (Arena, G., et al. Tetrahedron Lett. 1999, 40, 1597). For this recognition, there should be a free -COOH moiety from the guest molecule. AFM, SEM, and DLS data exhibited spherical particles with a hundred-fold reduction in the size of the complexes when compared to the particles of the precursors. These spherical particles have been computationally modeled to possess hexameric species reminiscent of the hexameric micellar structures shown for a Ag(+) complex of a calix[6]arene reported in the literature (Houmadi, S., et al. Langmuir 2007, 23, 4849). Both AFM and TEM studies demonstrated the formation of nanospheres in the case of GSH-capped Ag nanoparticles in interaction with the amido-calix conjugate that possesses terminal -COOH moiety. The AFM studies demonstrated in this paper have been very well applied to albumin proteins to differentiate the aggregational behavior and nanostructural features exhibited by the complexes of proteins from those of the uncomplexed ones. To our knowledge, this is the first report wherein a amido-calix[4]arene conjugate and its amino acid/peptide/protein complexes have been differentiated on the basis of spectroscopy and microscopy studies followed by species modeling by computations.     

Novel on-site sample preparation approach with a portable agitator using functional polymer-coated multi-fibers for the microextraction of organophosphorus pesticides in seawater

A novel on-site sample preparation approach for the organophosphorus pesticides (OPPs) using functional polymer-coated fibers with a portable agitation device has been developed and demonstrated. In this approach, a handheld battery-operated electric toothbrush was used to provide agitation of the sample solution at the sampling site to facilitate extraction. A functional conjugated polymer (2-(9,9-bis(6-bromo-2-ethylhexyl)9-H-fluoren-2-yl)benzene-1,4-diamine) was coated on commercial Technora fibers (each strand consisted of 1000 filaments, each of diameter ca. 9.23μm) which were then used for extraction. After extraction, the fibers were brought back to the laboratory in an icebox. The analytes were subsequently desorbed by organic solvent and the extract was analysed by gas chromatography-mass spectrometry. Six OPPs, triethylphosphorothiolate, thionazin, sulfotep, phorate, disulfoton and parathion were used as model compounds. Experimental parameters such as extraction time, desorption time, types of polymer fibers and fiber coatings as well the nature of desorption solvent were optimized in the laboratory prior to its on-site application of the procedure. Using optimum extraction conditions calibration curves were linear with correlation coefficient of 0.9748-0.9998 over the concentration range of 0.1-10μgl(-1). The method detection limits (at a signal-to-noise ratio of 3) were in the range of 0.3-30.3ngl(-1), which were lower than what could be achieved with solid-phase extraction performed at the laboratory. The proposed method was evaluated for the on-site extraction of OPPs in seawater samples.     

A least-squares minimum-cost network flow algorithm

Node-arc incidence matrices in network flow problems exhibit several special least-squares properties. We show how these properties can be leveraged in a least-squares primal-dual algorithm for solving minimum-cost network flow problems quickly. Computational results show that the performance of an upper-bounded version of the least-squares minimum-cost network flow algorithm with a special dual update operation is comparable to CPLEX Network and Dual Optimizers for solving a wide range of minimum-cost network flow problems.     

Si-rich SiNx rear passivated c-Si solar cell with a novel antimony Local Back Surface Field formed by Laser Fired Contact

Local Back Contact (LBC) crystalline silicon solar cell with novel antimony (Sb) Local Back Surface Field (LBSF) are reported. The Sb LBSF is formed at low temperature with a Laser Fired Contacts (LFC) process. To improve the solar cell parameters of Sb LBSF, the rear passivation layer with SiN_x is optimized by varying the refractive index. The Si-rich SiN_x with a refractive index (n) of 2.7 possesses high lifetime of 2 ms with reduced absorption at a longer wavelength. The increase in lifetime is analyzed with Si–H bond concentration by FTIR. A 100 nm thick Sb layer with low laser power of 44 mW resulted in a junction depth of 500 nm with a carrier concentration of 5 × 10²⁰ cm^?3. The improved rear passivation with Si-rich SiN_x, the optimized Sb thickness yielded the best electrical results, with open circuit voltage (V_oc) of 643 mV and efficiency of 19.25%, compared to the reference cell with V_oc of 625 mV and efficiency of 18.20%.     

Fluorescence Correlation Spectroscopy of Gold Nanoparticles

Diffusion dynamics of gold nanoparticles (GNPs) was studied by fluorescence correlation spectroscopy (FCS). The fluorescence was studied by exciting the particles by green laser (532 nm), which is far from longitudinal plasmon band of nanorods. Transmission electron microscope (TEM) and UV-Vis-NIR spectrometer were used to characterize the gold nanoparticles. Despite their low quantum yields, GNPs possess the native fluorescence. The excellent antiphotobleaching behavior of gold nanorods leads to prospects of using FCS for its detailed studies. Using FCS, dynamic information can be extracted from the fluorescence fluctuations in the system by autocorrelation function. Maximum entropy method (MEMFCS) was used to identify the number of distinct components present in the system. The particle sizes obtained from FCS were found to be higher (by few orders of magnitude) compared to TEM analysis. This might be due to the possible contributions from cetyltrimethyl ammonium bromide (CTAB) capping in the system.     

Raman spectroscopic investigations on intermolecular interactions in aggregates and crystalline forms of trans‐astaxanthin

Astaxanthin is a carotenoid naturally found in microbial organisms, microalgae, and many crustaceans. Its consumption has led to beneficial effects such as pigmentation of marine animals, and it favorably addresses several human health issues as a result of its high important antioxidant property. Several companies produce synthetic trans‐astaxanthin for dietary purposes in aquaculture, where it is mainly used for pigmentation. It is known that trans‐astaxanthin manifests itself as a monomer in organic solvents, as aggregates in aqueous solutions of organic solvents, or as crystalline solids. These forms display unique optical and structural properties, which have an impact on biological systems. In this work, we report on detailed Raman investigations, in conjunction with optical absorption spectroscopy, of monomer, aggregates, and crystalline forms of trans‐astaxanthin. The Raman and optical absorption spectroscopic investigations of trans‐astaxanthin aggregates were performed as a function of time, showing the formation of card‐packed aggregates after 2 h, and head‐to‐tail aggregates after 24 h in a 10% acetone–water astaxanthin solution. For the crystalline trans‐astaxanthin, a pointwise Raman mapping evidenced the presence of two distinct crystal structures. The Raman modes of these crystal structures (A and B) were correlated with the intermolecular interactions present in chloroform solvated (AXT‐Cl) and unsolvated (un‐AXT) trans‐astaxanthin single crystals. Both crystal structure A and the card‐packed aggregates have similar intermolecular π stacking interactions as AXT‐Cl. The crystal structure B and the head‐to‐tail aggregates showed linear chain features as in un‐AXT. This work also clearly demonstrates that Raman spectroscopy is a powerful tool to distinguish the crystal structures present in crystalline powder of trans‐astaxanthin. Copyright © 2012 John Wiley & Sons, Ltd.     

Cytotoxicity and fluorescence studies of silica-coated CdSe quantum dots for bioimaging applications

The toxicological effects of silica-coated CdSe quantum dots (QDs) were investigated systematically on human cervical cancer cell line. Trioctylphosphine oxide capped CdSe QDs were synthesized and rendered water soluble by overcoating with silica, using aminopropyl silane as silica precursor. The cytotoxicity studies were conducted by exposing cells to freshly synthesized QDs as a function of time (0–72 h) and concentration up to micromolar level by Lactate dehydrogenase assay, MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay, Neutral red cell viability assay, Trypan blue dye exclusion method and morphological examination of cells using phase contrast microscope. The in vitro analysis results showed that the silica-coated CdSe QDs were nontoxic even at higher loadings. Subsequently the in vivo fluorescence was also demonstrated by intravenous administration of the QDs in Swiss albino mice. The fluorescence images in the cryosections of tissues depicted strong luminescence property of silica-coated QDs under biological conditions. These results confirmed the role of these luminescent materials in biological labeling and imaging applications.     

Microwave-assisted rapid extracellular synthesis of stable bio-functionalized silver nanoparticles from guava (<Emphasis Type="Italic">Psidium guajava</Emphasis>) leaf extract

Our research interest centers on microwave-assisted rapid extracellular synthesis of bio-functionalized silver nanoparticles of 26 ± 5 nm from guava (Psidium guajava) leaf extract with control over dimension and composition. The reaction occurs very rapidly as the formation of spherical nanoparticles almost completed within 90 s. The probable pathway of the biosynthesis is suggested. Appearance, crystalline nature, size and shape of nanoparticles are understood by UV–vis (UV–vis spectroscopy), FTIR (fourier transform infrared spectroscopy), XRD (X-ray diffraction), FESEM (field emission scanning electron microscopy) and TEM (transmission electron microscopy) techniques. Microwave-assisted route is selected for the synthesis of silver nanoparticles to carry out the reaction fast, suppress the enzymatic action and to keep the process environmentally clean and green.     

Design of a metastructure for vibration isolation with quasi-zero-stiffness characteristics using bistable curved beam

Nonlinear Dynamics - This work designs and analyzes a metastructure-based vibration isolation model to improve small-scale equipment's isolation effectiveness under low-frequency excitations....