A crystalline sponge based on dispersive forces suitable for X-ray structure determination of included molecular guests

A crystalline porous material showing one-dimensional (1-D) rectangular micropores (12 × 9 Ų) has been assembled from a semirigid macrocyclic tetraimine and EtOAc as the templating agent. The 1-D nature of the material is intrinsic to the conformationally rigid structure of a macrocyclic sub-unit bearing four cyclohexylidene residues. The multiple dispersive forces established among the aliphatic residues glutted the 1-D channels and provided thermal stability to the material at temperatures below 160 °C. Upon removal of the template, the structure of the empty solid exhibited permanent microporosity (S _BET = 342 m² g^–1). Being a true molecular sponge, the channel framework of this material allowed the inclusion of a variety of molecular sample guests without compromising its crystalline nature. Remarkably, this crystalline material enabled the structure determination by X-ray diffraction of the included molecules. Theoretical studies demonstrated the vital role played by the dispersive forces in the overall stabilization of the crystal packing.     

Thermal properties and stability of lithium titanophosphate glasses

DTA was used to study thermal properties and thermal stability of (50-x)Li₂O-xTiO₂-50P₂O₅ (x=0–10 mol%) and 45Li₂Ot-yTiO₂-(55-y)P₂O₅ (y=5–20 mol%) glasses. The addition of TiO₂ to lithium phosphate glasses results in a non-linear increase of glass transition temperature. All prepared glasses crystallize under heating within the temperature range of 400–540°C. The lowest tendency towards crystallization have the glasses with x=7.5 and y=10 mol% TiO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were LiPO₃, Li₄ P₂O₇, TiP₂O₇ and NASICON-type LiTi₂(PO₄)₃. DTA results also indicated that the maximum of nucleation rate for 45Li₂O-5TiO₂-50P₂O₅ glass is close to the glass transition temperature.     

Synthesis, ring transformations, IR-, NMR and DFT study of heterocycles with two ferrocenyl units

Cyclization of 1,5-bis(ferrocenylmethylidene)thiocarbonohydrazide with DMAD afforded diastereomeric dimethyl-thiazole-4,5-dicarboxylates. The cis-isomer undergoes ring opening and recyclization to a thiazolone derivative. A further thiazolone was obtained from this precursor with ethyl chloroacetate employing a bifunctional organocatalyst. Due to its propensity to dehydrogenation evidenced by DFT calculations, the studied thiocarbonohydrazide underwent oxidative cyclizations under different conditions to yield a 1,3,4-thiadiazole and a 1,2,4-triazole derivative, respectively. Thermal isomerisation of 1,3,4-thiadiazole into 1,2,4-triazole was also observed. The DMAD-mediated cyclizations of the S-metylated thiocarbonohydrazide and the 1,5-bis(ferrocenylmethylideneamino)guanidine gave 1,2,4-triazole derivatives and a 4-pyrimidone, respectively. The structure of the new compounds was established by IR and NMR spectroscopy, including HMQC, HMBC and DEPT measurements. The solid state structure of a triazole was revealed by single crystal X-ray analysis.     

Thermal decomposition of dinitrogen complexes of Cr(III)

The thermal behaviour of two dinitrogen complexes of chromium with EDTA and CDTA have been studied using DTA and TG. IR spectroscopy is used for the characterization of intermediate products. The loss of dinitrogen occurs at 240°C in both cases.     

Determination of extractable chromium(VI) in the presence of large excess of chromium(III) in solid materials

Summary A method for the determination of chromium(VI) in solid materials with a Cr(VI) content at ppm level in the presence of ca. 10% Cr(III) has been devised. Chromium(VI) is extracted with 0.1M NaOH in a double-water bath (97° C) for 90 min. Differential-pulse polarography in 1M NaOH and spectrophotometry with 1,5-diphenylcarbazide have been tested for use in the final determination of Cr(VI). After extraction in the form of dithiocarbamate into methylisobutylketone or ethylacetate, chromium was determined by flame AAS and DPP in an organic extract.     

Ab initio calculation of structure and transport properties of He…X (X = Zn, Cd, Hg) van der Waals complexes

The ground state ab initio CCSD(T) potential curves using various basis sets (aug-cc-pVXZ-PP (X = D, T, Q, 5)) is obtained for the dimers of helium with IIb group metals. The effect of the position of the (mid) bond-functions on the interaction energy is discussed. A Symmetry Adapted Perturbation Theory decomposition of the interaction energy is provided and the trends in the dimer stabilizing and destabilizing contributions are depicted. The spline fitted potential curves are applied together with rigorous statistical formulae in order to obtain the transport coefficients (viscosity coefficients, diffusion coefficients) and the second virial coefficient both for pure constituents and mixtures. The obtained theoretical results are compared with available experimental data. Molecular dynamics is used to obtain reliable values of the diffusion coefficients for all the systems under study.     

Separation and identification of highly fluorescent compounds derived from trans-resveratrol in the leaves of Vitis vinifera infected by Plasmopara viticola

A method for identification of highly fluorescent compounds in vine leaves infected by Plasmopara viticola was developed using reversed phase liquid chromatography with simultaneous diode array and fluorometric detection. Fluorescent compounds were extracted from leaves with a methanol-water mixture (70:30). Separation by HPLC was performed using a C(18) column and gradient elution with water-acetonitrile mixtures (20-80% of acetonitrile). The main unknown fluorescent compound was identified by line spectral comparison with a standard obtained by UV photoisomerization of trans-resveratrol glucoside, and its structure was confirmed by liquid chromatography-mass spectrometry. Identification and structural elucidation of the fluorescent compound in the leaves of Vitis vinifera allows early detection of Plasmopara viticola invasion.     

Enantioselective multicomponent synthesis of fused 6-5 bicyclic 2-butenolides by a cascade heterobicyclisation process

The successive coupling of an alkoxy(aryl/heteroaryl)carbene complex of chromium with either a ketone or an imide lithium enolate and then a 3-substituted (H, TMS, PhCH(2), PhCH(2)CH(2), Me) propargylic organomagnesium reagent has afforded novel hydroxy-substituted bicyclic [4.3.0]-γ-alkylidene-2-butenolides with three modular points that has allowed the efficient introduction of molecular complexity, including a homopropargylic alcohol core. The selective formation of these five- or six-component heterobicyclisation products is the result of the regioselective integration of the Grignard reagent as a propargyl fragment followed by a cascade CO/alkyne/CO insertion, ketene trapping and elimination sequence. By using lithium enolates of chiral N-acetyl-2-oxazolidinones and the corresponding propargylic organocerium reagents, both enantiomers of these bicyclic heterocycles were efficiently prepared with very high enantiomeric purity. Architecturally, these fused bicyclic butenolides are characterised by a highly unsaturated and oxygenated core and they exhibit strong blue fluorescence in solution.     

β-Phenylproline: the high β-turn forming propensity of proline combined with an aromatic side chain

The conformational propensities of the proline analogue bearing a phenyl substituent attached to the β carbon, in either a cis or a trans configuration relative to the carbonyl group, have been investigated. The behaviour of cis- and trans(βPh)Pro has been compared with that of proline in homochiral and heterochiral dipeptide sequences. NMR and IR studies as well as X-ray diffraction analysis provide evidence that the β-phenyl substituent does not disrupt the tendency of proline to occupy the i+1 position of a β-turn. The puckering of the pyrrolidine ring is significantly affected by the presence of the aromatic substituent, which tends to occupy positions that minimize steric repulsions. As a consequence, this substituent adopts specific well-defined orientations, which are more restricted for the cis derivative. Interactions between this aromatic group and that in the adjacent phenylalanine residue may be responsible for some of the conformational differences observed among the different peptides studied.     

Interactions of multicationic bis(guanidiniocarbonylpyrrole) receptors with double-stranded nucleic acids: syntheses, binding studies, and atomic force microscopy imaging

Compounds 1-3, composed of two guanidiniocarbonylpyrrole moieties linked by oligoamide bridges and differing in number and type of basic groups, were prepared. The sites and degree of protonation of 1-3 depend strongly on the pH value. The interactions of these compounds with several double-stranded (ds) DNA and dsRNA were investigated by means of UV/Vis and CD spectroscopy as well as isothermal titration microcalorimetry (ITC). These studies revealed that the binding of 1-3 to the polynucleotides is driven by three factors, the presence of aliphatic amino groups, the protonation state of the compounds, and the steric properties of the polynucleotide binding site, that is, the shape and structure of their grooves. The results obtained by all applied methods consistently indicated that receptors 1-3 bind to the minor groove of DNA, but, by contrast, to the major groove of RNA. Additionally, it was shown by atomic force microscopy (AFM) imaging that upon interaction of compound 2 with calf thymus (ct) DNA induced aggregation of the DNA occurs, leading to pronounced changes in its secondary structure.