Higher-order effects on self-similar parabolic pulse in the microstructured fibre amplifier

By considering higher-order effects, the properties of self-similar parabolic pulses propagating in the microstructured fibre amplifier with a normal group-velocity dispersion have been investigated. The numerical results indicate that the higher-order effects can badly distort self-similar parabolic pulse shape and optical spectrum, and at the same time the peak shift and oscillation appear, while the pulse still reveals highly linear chirp but grows into asymmetry. The influence of different higher-order effects on self-similar parabolic pulse propagation has been analysed. It shows that the self-steepening plays a more important role. We can manipulate the geometrical parameters of the microstructured fibre amplifier to gain a suitable dispersion and nonlinearity coefficient which will keep high-quality self-similar parabolic pulse propagation. These results are significant for the further study of self-similar parabolic pulse propagation.     

The dissociative adsorption of borane on the Ge(1 0 0)-2 × 1 surface: A density functional theory study

By means of cluster models coupled with density functional theory, we have studied the hydroboration of the Ge(1 0 0)-2 × 1 surface with BH₃. It was found that the Ge(1 0 0) surface exhibits rather different surface reactivity toward the dissociative adsorption of BH₃ compared to the C(1 0 0) and Si(1 0 0) surfaces. The strong interaction still exists between the as-formed BH₂ and H adspeices although the dissociative adsorption of BH₃ on the Ge(1 0 0) surface occurs readily, which is in distinct contrast to that on the C(1 0 0) and Si(1 0 0) surfaces. This can be understood by the electrophilic nature of the down Ge atom, which makes it unfavourable to form a GeH bond with the dissociating proton-like hydrogen. Alternatively, it can be attributed to the weak proton affinity of the Ge(1 0 0) surface. Nevertheless, the overall dissociative adsorption of BH₃ on group IV semiconductor surfaces is favourable both thermodynamically and kinetically, suggesting the interesting analogy and similar diversity chemistry of solid surface in the same group.     

The colloidal stability and core-shell structure of magnetite nanoparticles coated with alginate

The adsorption of alginate (Alg) onto the surface of in water dispersed Fe₃O₄ nanoparticles and zeta potential of alginate-coated Fe₃O₄ nanoparticles have been investigated to optimize the colloidal stability of Alg-coated Fe₃O₄ nanoparticles. The adsorption amount of Alg increased with the decrease of adsorption pH. The zeta potential of Fe₃O₄ nanoparticles shifted to a lower value after adsorption of Alg. The lower adsorption pH was the lower zeta potential of Fe₃O₄ nanoparticles became. The Alg-coated Fe₃O₄ nanoparticles were found to be stabilized by steric and electrostatic repulsions. Those prepared at pH 6 were not stable around pH 5, and those prepared at pH 4 became unstable at pH below 3.5. Alg of M_w 45 kDa was a little bit more adsorbed onto nanoparticles surface than that of M_w 24 kDa. An average Fe₃O₄ core size of 9.3 ± 1.7 nm was found by transmission electronic microscopy. An average hydrodynamic diameter of 30-150 nm was measured by photon correlation spectroscopy. However, an average core size of 10 nm and an average hydrodynamic diameter of 38 nm were estimated from the magnetization curve of the concentrated magnetic fluids (MFs). The maximum available saturation magnetization of MFs was about 3.5 kA/m.     

整体毛细管X光透镜在大气颗粒物单颗粒分析中的应用

对大气颗粒物进行单颗粒X射线荧光(XRF)分析,是一种识别大气颗粒物来源的有力手段.为了利用实验室X射线光源对大气颗粒物进行单颗粒XRF分析,建立了基于整体毛细管X光透镜和实验室X射线光源的微束X射线谱仪.透镜焦斑处的功率密度增益在103数量级,焦斑直径为30 μm左右.该微束X射线谱仪对Fe-Kα线的最小探测极限为0.7 Pg.在Mo靶光源电压和电流分别为30 kV和50 mA的条件下,利用该谱仪对直径为9 μm的大气颗粒物单颗粒进行XRF分析时,测谱时间在180 s左右.实验表明,基于毛细管X光透镜和实验室X射线光源的微束X射线分析技术在大气颗粒物单颗粒分析中有着潜在的应用价值.     

电子束蒸发沉积Ir膜真空紫外反射特性

Ir是一种重要的真空紫外反射材料,在太阳物理、宇宙物理、生命科学、大气物理、同步辐射等方面有着十分重要的应用.对电子束蒸发沉积Ir膜在真空紫外波段的反射特性进行了系统的理论和实验研究.根据吸收材料基底上单层金属膜数学计算模型,对不同基片上各种厚度的Ir膜真空紫外反射率进行了优化计算.根据计算和前期实验结果,采用电子束蒸发方法,在石英、K9玻璃基片上沉积了不同厚度的Ir膜,在入射波长120 nm处获得了近30%正入射反射率,对应的Ir膜厚度为12 nm.过厚或过薄均不利于Ir膜反射率的提高.经退火处理后,Ir膜中张应力有所释放但并未消除,同时晶粒平均尺寸显著增大,反射率下降.     

一种用于电子纸的电泳液的显示性能研究

用有机颜料汉沙黄(P.Y.3)、苏丹黑和合适的稳定剂为原料配制了一种性能稳定的电泳显示液.分析了此电泳显示液中颜料微粒的带电机理及其影响因素,研究了在改变电压方向时反射光谱与吸收光谱的变化及其原因,光谱分析结果表明体系中存在的各种吸附使显示效果受到局限,反射谱与吸收谱的变化在表征器件的显示特性时呈现出一致性,器件的反射光强和反射率在不同波长上有区域选择性,同时对比度也有区域选择性,这决定了在监测器件的响应时应选择的波长范围以及可利用的光源.兼顾灵敏性和测试信号强度的需求,选用峰值波长为470 nm的蓝光二极管为光源,电泳槽的厚度为0.2 mm,用荧光光谱仪监测相同周期不同幅值脉冲电压作用下颜料微粒在493 nm波长处的反射光强的变化,并由示波器记录并输出反射光强随驱动电压的变化,还结合相关理论讨论了驱动电压对器件的反射光强和对比度的影响.     

Collective expansion and hadronization in high energy heavy ion collision experiments

An overview of research status of soft physics in high energy heavy-ion collision experiments and recent experimental results are presented.     

高温退火对蓝宝石基片的表面形貌和对CeO缓冲层以及Tl-2212超导薄膜长的影响

研究了蓝宝石(1102)基片在不同温度和时间下退火时表面形貌和表面相结构的变化,以及它对CeO2缓冲层和T1-2212超导薄膜生长的影响.原子力显微镜(AFM)研究表明,在流动氧环境中1000℃温度下退火,蓝宝石(1102)的表面首先局部区域形成台阶结构,然后表面形成叠层台阶结构,随着退火时间的延长.表面发生了台阶合并现象,表面形貌最终演化为稳定的具有光滑平台的宽台阶结构.XRD测试表明,通过高温热处理可以大幅度提高蓝宝石基片表面结构的完整性.在1000℃温度下热处理20 h的蓝宝石(1102)基片上可以生长出具有面内取向的CeO2(001)缓冲层.在具有缓冲层的蓝宝石基片上可以制作出高质量c轴织构的外延11-2212超导薄膜,其临界转变温度(Tc)为104.7 K,液氮温度下临界电流密度(Jc)达到3.5 MA/cm2,微波表面电阻R(77 K,10 GHz)约为390μΩ.     

蒙药材肋柱花中盐酸小檗碱的反相高效液相色谱法分析

用高效液相色谱法测定蒙药材肋柱花中小檗碱的含量.色谱流动相为乙腈:水(V:V=30:70,每1000mL水中加入KH2PO43.4g),流速为0.8mL/min,紫外检测波长为345nm.结果表明,盐酸小檗碱在6.25-50μg/mL范围内具有良好的线性关系,相关系数为0.9992,实验测得平均回收率为97.7%,RSD=0.94%(n=6).方法操作简便,灵敏度高,结果准确可靠.     

周期聚焦磁场中束晕-混沌的实Morlet小波函数控制

 基于束晕-混沌的非线性控制策略,对周期性聚焦磁场中初始分布满足K-V分布的粒子束进行模拟研究,提出了控制其束晕-混沌的实Morlet小波函数控制器,并给出具体的实施方案。数值模拟研究表明,在适当的参数条件下,运用这种方法不仅可以消除束晕及其再生现象,达到对束晕-混沌的有效控制,而且可以控制束流到均匀分布。