Selective oxidation of alcohols with hydrogen peroxide catalyzed by tungstate ions (WO4) supported on periodic mesoporous organosilica with imidazolium frameworks (PMO-IL)

Tungstate ions supported on the periodic mesoporous organosilica with ionic liquid frameworks (WO₄⁼@PMO-IL) were found to be a recoverable catalyst system for the highly selective oxidation of various primary or secondary alcohols to the corresponding aldehydes or ketones by 30% H₂O₂ as green oxidant under neutral aqueous reaction conditions. The catalyst can be also recovered and efficiently reused in seven subsequent reaction cycles without any remarkable decreasing in the catalyst activity and selectivity. Moreover, N₂ sorption analysis, transmission electron microscopy (TEM) images, and thermal gravimetric analysis (TGA) showed that the structure regularity and functional groups loaded of the catalyst were not affected during the reaction process.     

Dynamic surface tension and dilational viscoelasticity of adsorption layers of alkylated chitosans and surfactant–chitosan complexes

The kinetics of the adsorption at the air-water interface and the processes of the structure formation inside the adsorption layers of hydrophobically modified systems [alkylated chitosans and sodium dodecyl sulfate (SDS)–chitosan (Ch) complexes] have been studied by the tensiometric method based on the axisymmetric rising-bubble-shape analysis as a function of the bulk concentration of polymers and the ageing time of their adsorption layers. The kinetics of the adsorption of chitosan, alkylated chitosans (ChC₃, ChC₈, and ChC₁₂), and surfactant–polyelectrolyte (PE) complexes formed by the chitosan and the polysoaps with oppositely charged anionic surfactant SDS is characterized by an induction time (the so-called lag time), τ_lag, corresponding to the diffusion stage of the formation of adsorption layers. During this time, the decrease in the surface tension (or the increase in the surface pressure π) does not exceed several millinewtons per meter that corresponds to the “gaseous” state of adsorption layers. The postlag stage of the formation of the adsorption layer is characterized by the remarkable rate of increase in the surface pressure π that corresponds to the conformational rearrangement of PEs inside the adsorption layer by increasing the number of hydrophobic groups (adsorbing centres) in contact with the non-polar phase at the interface. It has been found that during the lag time, the adsorption of alkylated chitosans (cationic polysoaps) increases with increasing alkyl chain length, whereas during the postlag time, the adsorption of the ChC₃ is maximal with regard to other polysoaps. It has been confirmed that at equal content of alkyl groups in the system, the surface activity of the SDS–Ch complexes is much higher with regard to that of the polysoaps. The viscoelasticity of adsorption layers of individual PEs and their complexes continuously increases with the ageing time, giving evidence for the interaction between the polymers inside the adsorption layers. It has been found that the rate of increase in the dilational storage module E′ of the adsorption layers of SDS–Ch complexes is much higher than for the polysoaps that correlates with the higher surface activity of the former with regard to the latter. For the mentioned systems, the module E′ is much higher than the loss module E″ that confirms the solid-like properties of their adsorption layers. On the other hand, the adsorption layers of the chitosan are liquid-like, while E′<<E′′.     

Determination of the electron affinity of the acetyloxyl radical (CH3COO) by low-temperature anion photoelectron spectroscopy and ab initio calculations

The electronic structure and electron affinity of the acetyloxyl radical (CH3COO) were investigated by low-temperature anion photoelectron spectroscopy and ab initio calculations. Photoelectron spectra of the acetate anion (CH3COO-) were obtained at two photon energies (355 and 266 nm) and under three different temperatures (300, 70, and 20 K) with use of a new low-temperature ion-trap photoelectron spectroscopy apparatus. In contrast to a featureless spectrum at 300 K, a well-resolved vibrational progression corresponding to the OCO bending mode was observed at low temperatures in the 355 nm spectrum, yielding an accurate electron affinity for the acetyloxyl radical as 3.250 +/- 0.010 eV. This experimental result is supported by ab initio calculations, which also indicate three low-lying electronic states observed in the 266 nm spectrum. The calculations suggest a 19 degrees decrease of the OCO angle upon detaching an electron from acetate, consistent with the vibrational progression observed experimentally.     

Sonochemical Synthesis of a Novel Nanoscale Lead(II) Coordination Polymer: Synthesis,Crystal Structure,Thermal Properties,and DFT Calculations of [Pb(dmp)(μ‐N3)(μ‐NO3)]n with the Novel Pb2(μ‐N3)2(μ‐NO3)2 Unit

A new nanostructured coordination polymer of divalent lead with the ligand 2,9‐dimethyl‐1,10‐phenanthroline (dmp), [Pb(dmp)(μ‐N₃)(μ‐NO₃)]_n ( 1 ), was synthesized by sonochemical methods. The polymer was characterized by scanning electron microscopy, X‐ray powder diffraction, IR, ¹H NMR, and ¹³C NMR spectroscopy, and elemental analyses. Compound 1 was structurally characterized by single‐crystal X‐ray diffraction. The single‐crystal analysis shows that the coordination number of Pb^II ions is seven, (PbN₄O₃) has a “stereo‐chemically active” electron lone pair, and the coordination sphere is hemidirected. The chains interact with each other through π–π stacking interactions to create a 3D framework. The structure of the title complex was optimized by density functional calculations. The calculated structural parameters and the IR spectrum of the title complex are in agreement with the crystal structure.     

Ultrasound-assisted one-pot synthesis of α-oxycarbanilinophosphonates via a three-component condensation of an aldehyde, diethyl phosphite and an isocyanate under solvent-free conditions

An efficient one-pot method has been developed for the synthesis of α-oxycarbanilinophosphonates via a one-pot reaction of an aldehyde with diethyl phosphite in the presence of magnesium oxide followed by reaction with an isocyanate under solvent-free conditions using ultrasonic irradiation. This method is simple, rapid and good yielding.     

Precomputing strategy for Hamiltonian Monte Carlo method based on regularity in parameter space

Markov Chain Monte Carlo (MCMC) algorithms play an important role in statistical inference problems dealing with intractable probability distributions. Recently, many MCMC algorithms such as Hamiltonian Monte Carlo (HMC) and Riemannian Manifold HMC have been proposed to provide distant proposals with high acceptance rate. These algorithms, however, tend to be computationally intensive which could limit their usefulness, especially for big data problems due to repetitive evaluations of functions and statistical quantities that depend on the data. This issue occurs in many statistic computing problems. In this paper, we propose a novel strategy that exploits smoothness (regularity) in parameter space to improve computational efficiency of MCMC algorithms. When evaluation of functions or statistical quantities are needed at a point in parameter space, interpolation from precomputed values or previous computed values is used. More specifically, we focus on HMC algorithms that use geometric information for faster exploration of probability distributions. Our proposed method is based on precomputing the required geometric information on a set of grids before running sampling algorithm and approximating the geometric information for the current location of the sampler using the precomputed information at nearby grids at each iteration of HMC. Sparse grid interpolation method is used for high dimensional problems. Tests on computational examples are shown to illustrate the advantages of our method.     

Markov Chain Monte Carlo from Lagrangian Dynamics

Hamiltonian Monte Carlo (HMC) improves the computational efficiency of the Metropolis–Hastings algorithm by reducing its random walk behavior. Riemannian HMC (RHMC) further improves the performance of HMC by exploiting the geometric properties of the parameter space. However, the geometric integrator used for RHMC involves implicit equations that require fixed-point iterations. In some cases, the computational overhead for solving implicit equations undermines RHMC’s benefits. In an attempt to circumvent this problem, we propose an explicit integrator that replaces the momentum variable in RHMC by velocity. We show that the resulting transformation is equivalent to transforming Riemannian Hamiltonian dynamics to Lagrangian dynamics. Experimental results suggest that our method improves RHMC’s overall computational efficiency in the cases considered. All computer programs and datasets are available online (http://www.ics.uci.edu/babaks/Site/Codes.html) to allow replication of the results reported in this article.     

Aqueous ionic and complementary zwitterionic soluble surfactants: molecular dynamics simulations and sum frequency generation spectroscopy of the surfaces

An aqueous ionic surfactant, 1-dodecyl-4-(dimethylamino)pyridinium (DMP) bromide, and the corresponding zwitterion 2-[4-(dimethylamino)pyridinio]dodecanoate (DPN) were explored by means of molecular dynamics (MD) simulations and, for the ionic system, by infrared-visible sum frequency generation (IR-vis SFG). The molecular structure of the interfacial layer was investigated for the ionic and zwitterionic systems as a function of surfactant concentration, both in water and in salt (KF or KBr) solutions, by MD simulations in a slab geometry. The buildup of the surface monolayer and a sublayer was monitored, and density and orientational profiles of the surfactants were evaluated. The difference between the ionic and zwitterionic systems and the effect of the added salt were analyzed at the molecular level. The results of MD simulations were compared to those of nonlinear optical spectroscopy measurements. IR-vis SFG was employed to study the DMP ionic surfactant in water and upon addition of simple salts. The influence of added salts on the different molecular moieties at the interface was quantified in detail experimentally.     

Synthesis and properties of amphiphilic maleic acid copolymers

New amphiphilic polymers derived from maleic acid copolymers and containing stearyl or oleyl residues were prepared. Their physicochemical properties were studied, and the possibility of using them as carriers for antifungal agents was examined with Amphotericin B as example.