Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Cyclotron resonance for electrons over helium in a resonator

The cyclotron resonance (CR) problem for electrons over a helium film occupying the lower part of a resonator is solved. This problem is shown to represent an example of the well-known problem on the behavior of a system of coupled oscillators. For such oscillators, the coupling constant is determined as a function of the problem parameters with its minimal value in zero magnetic field and its maximal value at resonance conditions, when the cyclotron frequency coincides with one of the resonator modes. The details of the CR absorption of microwave energy by the coupled system formed by 2D electrons and a resonator are calculated. The results are discussed in application to the known CR experiments with electrons over helium.     

Absorption and emission dynamics in concentrated optical ensembles under laser excitation

A new theoretical model describing the emission and absorption dynamics in an ensemble of molecules under intense coherent pulsed pumping is developed on the basis of the concepts of cooperative light-induced luminescence (CLIL). The CLIL development is described within the framework of formalism of the system density matrix in the space of photon wave functions. It is shown that the fast growth of CLIL relates to the development of coherent states of the quantum field in the area of efficient cooperative interactions of molecules (coherence volume). A system of equations for the calculation of CLIL energy, population of excited states, and optical absorption of the system in dependence on the laser pump energy density is solved. The theoretical results obtained are in good agreement with the experimental data.     

Account of Thermal Flow Through Metal-Semimetal BiSb Contact Boundary for Determination of EHF Detector Volt-Watt Sensitivity

Bismuth, antimony and its alloys are the typical representatives of a class of semimetals, which electric conductance is lower in 10²-10³ times, than of usual well conducting an electrical current metals. The alloys bismuth with antimony have semi-conductor properties in wide area of compositions at temperatures below 77 °K. The semimetals are rather perspective materials from the point of view of their probable application in various devices [1,2,3].In present time the semimetal alloys BiSb have wide application in thermoelectric generators and refrigerators. In work [3] the opportunity of use of semimetals BiSb with percentage content of Bi and Sb from 8 % up to 25 % was shown as high-sensitivity and of small inertion indicators of the mm range radiation where thermoelectric effect is used. The principle of action of such indicators is based on occurrence of temperature gradient in a semimetal crystal BiSb that has two contacts of the various area with flowing electrical current. Basic element of such device is the dot contact metal - semimetal. One of the main characteristics is volt-watt sensitivity of metal-semimetal BiSb contact which calculating is shown in present work.     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

Mutual coupling of elements in finite microstrip antennas

The mutual coupling of the radiating elements in microstrip antennas is studied using a rigorous electrodynamic approach in which the field singularities at the radiator edges are taken into account with analytic accuracy. A spectral method is employed in combination with a method of semi-inversion by extraction of the Green-function singularity. The degree of interaction of the elements of microstrip structures at the fundamental and higher current harmonicsis determined, and the applicability of various approximations is assessed.Radio-Astronomy Institute, Academy of Sciences of Ukraine. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 35, No. 8, pp. 688–701, August, 1992.     

Research problem

This section appears from time to time. Contributions are invited, and should be submitted to R C. Thompson, Mathematics Department. University of California, Santa Barbara, CA93106-3080, USA.     

Deuterium NMR studies of inositol liquid crystals [1]

Deuterium NMR investigations are presented on members of two new mesogenic series derived from the naturally occurring stereoisomers myo- and scW/o-inositol. Tetraethers of these two series exhibit thermotropic columnar phases in which the columns are apparently formed by stacked hydrogen bonded dimers of these molecules which chemically are vicinal diols. Deuterium NMR measurements were performed on the tetraoctyl homologues 2e (a cis diol) and 3e (a trans diol) of these series. We have investigated mixtures of these diols with small amounts of benzene-d₆ as probe molecules as well as samples of the neat diol compounds deuteriated at their hydroxyl groups. The results obtained show that the mesophases of both compounds are uniaxial and align partially in a magnetic field upon slow cooling from their isotropic liquids. The alignment is with the director parallel to the field direction indicating that the anisotropic magnetic susceptibility of this mesophase is positive. The deuterium quadrupole splitting of the benzene-d₆ probe in both systems is temperature dependent and in the trans diol 3e it even changes sign. This is interpreted in terms of a model in which the benzene-d₆ probe equilibrates rapidly between two (or more) solvation sites with quadrupole splittings of opposite signs The deuterium spectra of the neat deuterium labelled cis diol 2e exhibit two different signals due to the two deuterons which are located at the axial and equatorial hydroxyl groups. This indicates that there is no fast intra- or intermolecular exchange of the hydroxyl hydrogens. The overall quadrupole splittings of the hydroxyl deuterons in this compound are highly reduced compared to their static values and this is interpreted in terms of motional modes involving both reorientation of the hydroxyl deuterons about their C-O axis and overall reorientation of the molecules (or pairs of molecules) around the columnar axes. The corresponding spectra of the neat deuteriated trans diol 3e exhibit a single spectrum indicating that both hydroxyl deuterons in this compound are equivalent, or very nearly so. Within the mesophase region the spectrum undergoes gradual changes due to the increase in the molecular mobility, but the overall motional narrowing is less than in the cis isomer 2e. Apparently due to stronger hydrogen bonding in the trans isomer 3e the precession of the hydroxyl groups is hindered and a fast molecular reorientation is only possible at high temperatures.     

Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Transport properties of a side-chain liquid-crystalline polymer. Poly(4-acryloyloxy biphenyl)

The transport properties of a side-chain liquid-crystalline polymer forming a smectic A phase have been investigated using dichloromethane as a permeant. Samples differing in the isotropization enthaoly were analyzed. A. Correlation between this thermal parameter and sorption has been found, while the diffusion coefficient is substantially the same in all samples. The results obtained can be explained in terms of a biphasis model in which a disordered permeable phase is present within the liquid-crystalline phase, which is impermeable to the diffusant molecules.