Measured and calculated vertical structure of a sound field in the ocean

Results of measuring the monochromatic sound field with a dipping probe in the deep ocean are presented. The sound speed profile in the region of measurements had a minimum at a depth of 1600 m. The experiment was carried out in the Atlantic Ocean with the use of two vessels separated by a distance of approximately four ray cycles (～240 km). The experimental data are compared with the calculations based on a new concept of the Brillouin waves for describing the vertical structure of the sound field produced by rays. It is shown that a satisfactory agreement between experiment and calculation can be achieved by fitting the parameters of the experiment. Such a procedure allows one to refine or even to determine the experimental conditions, which not are always known. The proposed method of calculation offers an opportunity for solving inverse problems of ocean acoustics.     

Effects of localization of the areas of sound scattering by surface wind waves

Experimental studies of the scattering of a monochromatic sound signal by a rough sea surface are carried out. The signal is produced by a point source in a shallow-water basin. The measurements are performed with the use of horizontal and vertical linear receiving arrays. The experimental data are compared with the estimates obtained on the basis of the model developed by the authors for resonant sound scattering by surface roughness. A satisfactory agreement between the experiments and the calculations is achieved. It is shown that the scattered signal is formed within small surface areas, whose sizes have the same order of magnitude as the first Fresnel zone with respect to the source and the receiving system.     

The total acoustic impedance of a prolate spheroid performing transverse oscillatory movements

Using the theory of spheroidal wave functions, the total acoustic impedance is determined for a prolate spheroid performing transverse translational and rotational oscillatory movements. Expressions for the radiation resistance, the added mass, and the added moment of inertia are derived. It is shown that, in the lowfrequency approximation, this mass and moment of inertia reach limiting values identical to hydrodynamic ones. The components of the total acoustic impedance are calculated for spheroids of different relative thicknesses at an arbitrary frequency.     

Characteristics of high-power radiating imploding discharge with cold start

A qualitative model of the dynamics of a multiterawatt radiating Z-pinch with cold start and high rate of current rise is proposed. The model is used to analyze discharges with currents I ～ 2–5 MA (with dI/dt > 10¹³ A/s) through uniform or structured plasma-producing loads, including wire arrays. The most important consequence of cold start is that spatially nonuniform plasma production is prolonged to almost the entire current rise time. Under these conditions, the Ampére force begins to play a dominant role in the plasma dynamics before the plasma-producing load is completely transformed into an accelerated plasma. The results of computations of wire-array vaporization are presented. A formula is proposed for estimating the highest attainable velocity of plasma flow into a heterogeneous liner driven by the Ampére force. It is shown that local imbalance between radial motion of the produced plasma and supply of the plasma-producing substance to be ionized leads to axially nonuniform breakthrough of magnetic flux into the liner, which precedes plasma collapse. The magnetic-flux breakthrough gives rise to a chaotic azimuthal-axial plasma structure consisting of radial plasma jets of relatively small diameter, which is called a radial plasma rainstorm. The breaking-through azimuthal magnetic flux obstructs further current flow in the breakthrough region. Analyses of Z-pinch implosion based on the theory of Rayleigh-Taylor instability or the snowplow model are incorrect under the plasma-rainstorm conditions. The processes taking place in a stagnant Z-pinch include conversion of the energy carried by the current-generated magnetic field into turbulent MHD flow of the ion component of the plasma, its convective mixing with magnetic field, heating, energy transfer from ions to electrons, and emission from the plasma. Under typical experimental conditions, emission plays a key role in the energy balance in an imploding pinch. Z-pinch is modeled by an electric-circuit component that has a time-dependent nonlinear impedance and consumes the magnetic energy supplied by a generator through a magnetically insulated transmission line (MITL). The peak power reached in the circuit is comparable to the peak soft X-ray power output emitted by the pinch in terms of magnitude and timing. Optimum matching conditions are formulated for the generator-MITL-pinch circuit.     

Synthesis of ordered Ge-Si heterostructures containing ultrasmall germanium nanoclusters

Different techniques for the fabrication of structures containing ensembles of ultrasmall germanium nanoclusters distributed with a high density over the substrate surface are discussed. How to control the morphology and ordering of these ensembles is also discussed.     

Electromechanical properties of Pb<Subscript>3</Subscript>Ga<Subscript>2</Subscript>Ge<Subscript>4</Subscript>O<Subscript>14</Subscript> piezoelectric crystals grown from solution in a melt

Single crystals of lead gallium germanate Pb₃Ga₂Ge₄O₁₄ are grown from their own solution melts. The propagation of bulk acoustic waves is investigated, and the elastic, piezoelectric, and dielectric constants are calculated. The temperature dependences of the dielectric constants of this compound are analyzed.     

Microstructure and mechanical characteristics of nanodiamond-SiC compacts

Superhard nanodiamond-SiC ceramics are prepared by infiltrating liquid Si into porous nanodiamond compacts under pressure. Synthesized samples are 2.2 mm thick and 3–4 mm in diameter. The effect of particle size of dynamically synthesized nanodiamond powders on silicon infiltration and SiC phase formation is studied. It is established that silicon does not penetrate into the pores of nanodiamond powders if the original particle size is smaller than 0.5–1.0 μm. The critical pore size for infiltration is 100–200 nm. A study of the microstructure of the samples showed the presence of the nanometer-and submicron-scale SiC phase. The ultrasound velocities are measured in the prepared compacts, and the elastic moduli are calculated. __________ Translated from Fizika Tverdogo Tela, Vol. 46, No. 4, 2004, pp. 734–736. Original Russian Text Copyright ? 2004 by Ekimov, Gromnitskaya, Mazalov, Pal’, Pichugin, Gierlotka, Palosz, Kozubowski.     

Low-power RF plasma sources for technological applications: II. plasma sources under anomalous skin effect conditions

A theory of a planar disk-shaped RF plasma source under anomalous skin effect conditions is developed. In the absence of an external magnetic field, such conditions are satisfied for transverse electromagnetic waves with phase velocities below the electron thermal velocity, and, in the presence of this field, they are satisfied for electron cyclotron waves with frequencies corresponding to the resonant absorption line. For each of these cases, the RF field power deposited in a plasma with given parameters is determined and the equivalent plasma resistance is calculated.     

On the Nature of Radiation Resistance in Compensated Silicon

Russian Physics Journal -     

A Semiconductor Laser of the Visible Range as an Exciting Source of Raman Scattering

A possibility of application of semiconductor lasers of the visible range as exciting sources for Raman spectroscopy is studied. An experimental set-up for measuring Raman spectra of polycrystalline dielectrics and broad-gap semiconductors excited by a semiconductor laser with a wavelength of 640 nm was created. The conditions under which the spectral width of the lasing line of a semiconductor laser was within 10^-3 cm^-1 in the continuous mode with a power of 10 mW are realized. The characteristics of various types of exciting sources used in Raman spectroscopy are compared. The results of studies of the characteristic Raman spectra excited with a semiconductor laser in polycrystalline sulfur are presented.