Synthesis and reactions of 3‐pyrrolidinones

This review presents a survey of the synthetic methods and reactions of 3‐pyrrolidinones I (R = H, alkyl, acyl, ester; R₁ = H, alkyl, cyano, ester, etc). 3‐Pyrrolidinones are synthetically versatiles substrate, as they can be used for synthesis of a large variety of heterocyclic compounds, such as indoles and 5‐deazapteroic acid analogues and as a raw material for drug synthesis. The high reactivity of an active methylene group next to the carbonyl of the pyrrolidine ring is useful for various syntheses.     

Existence of oriented ion-hydroxide clusters in concentrated aqueous NaCl solution at pH 13

We probe the local electronic structure at solvated Na+ ions in 1 M aqueous NaCl solutions as a function of pH. A dramatic change in the Na+ white line intensity in X-ray absorption is observed for high pH values, reflecting a changing local electronic structure at the Na+ ions when OH- is present. Given the relative abundance of sodium and hydroxide ions, we conclude that one OH- affects at least 2.4+/-0.6 Na+ ions in an electronically noticeable way at pH 13. From the experimental data we infer that spatially extended clusters or networks incorporating Na+ and OH- can exist in the electrolyte solution. The experimental data are complemented by molecular dynamics simulations, which indicate the presence of structured clusters incorporating Na+, OH-, and solvent molecules.     

Thermal stability and dynamic mechanical thermal analysis of epoxy thermosets possessing N,N′-disubstituted pyromellitimide units

Abstract

In this work, three epoxy resins including diglycidyl ethers of N,N′-bis(2-hydroxyethyl)pyromellitimide (DIDGE), bisphenol-A (BADGE), and polyethylene glycol (PEDGE) were isothermally cured by an amine curing agent possessing N,N′-disubstituted pyromellitimide units (denoted by DIDAM). DIDGE resin was synthesized from the reaction of N,N′-bis(2-hydroxyethyl)pyromellitimide with an excess of epichlorohydrin. Also, DIDAM curing agent was prepared from the reaction of pyromellitic dianhydride with an excess of ethylene diamine. Completion of the isothermal curing processes was approved by both Fourier transform-infrared spectroscopy and non-isothermal differential scanning calorimetry (DSC). The DSC traces showed only the phase transitions related to the thermal degradation of the resulting thermosets. According to the thermogravimetric analyses, the DIDGE/DIDAM thermoset showed higher thermal stability at temperatures above 425?°C than the other two thermosets. While BADGE/DIDAM and PEDGE/DIDAM thermosets showed about 70% weight loss in the thermal range of 400–850?°C, DIDGE/DIDAM thermoset was encountered with only about 40% weight loss. The glass transition temperatures (T_g ) of the resulting thermosets were determined using tan δ vs temperature plots obtained from dynamic mechanical thermal analysis. The T_g values of BADGE/DIDAM, DIDGE/DIDAM, and PEDGE/DIDAM thermosets were found to be 211?°C, 189?°C, and 81?°C, respectively.     

Preparation and Characterization of Bhant Leaves‐derived Nitrogen‐doped Carbon and its Use as an Electrocatalyst for Detecting Ketoconazole

In this study, the electrocatalytic characteristics of nitrogen‐doped carbon (NDC) prepared from Clerodendrum Infortunatum L leaves on a glassy carbon electrode (GCE) surface was evaluated with regards to its ability to detect the electroactive drug ketoconazole (KCZ). The NDC was prepared by carrying out a simple pyrolysis of dry powder of the leaves at 850 °C. The prepared NDC was characterized using field‐emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and Brunauer‐Emmett‐Teller analysis, and was then used as an electrode material. The performance of the electrochemical KCZ sensor with the NDC‐modified glassy carbon electrode (NDC/GCE) was found to be optimal when using PBS buffer at pH 3 and a concentration of 0.1 mg/ml of NDC in the conjugate with Nafion polymer. Under these conditions, the NDC/GCE displayed a KCZ detection limit of 3 μM and a linear dependence of its response on KCZ concentration over a wide range of KCZ concentrations from 47 μM to 752 μM (R²=0.9742). These results confirmed the potential of NDC as an electrocatalyst.     

Characterization of Phenolic Compounds,Vitamin E and Fatty Acids from Monovarietal Virgin Olive Oils of “Picholine marocaine” Cultivar

Olive oil is an important product in the Mediterranean diet, due to its health benefits and sensorial characteristics. Picholine marocaine is the most cultivated variety in Morocco. The present research aims to evaluate the phenolic compounds, vitamin E and fatty acids of commercial Picholine marocaine virgin olive oils (VOOs) from five different North Moroccan provinces (Chefchaouen, Taounate, Errachidia, Beni Mellal and Taza), using HPLC-photodiode array (PDA)/electrospray ionization (ESI)-MS, normal phase (NP)-HPLC/ fluorescence detector (FLD) and GC-flame ionization detector (FID)/MS, respectively. The obtained results showed an average content of 130.0 mg kg⁻¹ of secoiridoids (oleuropein aglycone, 10-hydroxy-oleuropein aglycone and ligstroside aglycone, oleocanthal and oleacein), 108.1 mg kg⁻¹ of phenolic alcohols (tyrosol and hydroxytyrosol), 34.7 mg kg⁻¹ of phenolic acids (caffeic acid, ferulic acid and elenolic acid), and 8.24 mg kg⁻¹ of flavonoids (luteolin, luteolin glucoside, apigenin). With regard to vitamin E, α-tocopherol was the most abundant vitamin E (57.9 mg kg⁻¹), followed by α-tocotrienol (2.5 mg kg⁻¹), γ-tocopherol (4.5 mg kg⁻¹) and β-tocopherol (1.9 mg kg⁻¹), while δ-tocopherol was not detected. Moreover, 14 fatty acids were found and, among them, oleic acid (76.1%), linoleic acid (8.1%) palmitic acid (8.7%) and stearic acid (2.5%) were the major fatty acids detected. Finally, heat map and principal component analysis allowed us to classify the studied provinces in terms of VOO chemical composition: Chefchaouen (tyrosol and hydroxytyrosol), Taounate (oleuropein aglycone), Errachidia (ferulic acid, w-3 and w-6), Beni Mellal (oleocanthal) and Taza (luteolin and oleic acid).     

Studies on the liquid-liquid extraction and ion and precipitate flotation of Co(II) with decanoic acid

The liquid-liquid extraction, ion and precipitate flotation of Co(II) from chloride media of 1·10^–4M initial Co(II) concentration and =0.1 have been investigated using decanoic acid and the results are compared. Organic solvents used were chloroform in the case of liquid-liquid extraction and ethanol (used as a solvent for the collector and a frother) in the case of flotation. From the results it appears that liquid-liquid extraction takes place through the formation of the complex: (CoR₂)₂(HR)₂ but flotation occurs through the formation of a surface active product which has the empirical formula CoR₂. The effects of pH and of decanoic acid concentration on the three separation processes were also investigated and the results discussed. Good agreement was observed between the experimental precipitate flotation curves and the theoretical curve calculated from the data published for Co(II) hydrolysis.     

Removal of Co(II) from dilute aqueous solutions by adsorption on charcoal and subsequent macroflotation of the sorbent

As a part of a research program on the treatment of radioactive process waste waters, sorbent macroflotation was tested to remove Co(II) from dilute aqueous solutions. Activated charcoal was used as the sorbent, and gelatin, cetylpyridinium chloride, dodecylamine or N-dodecylpyridinium chloride (NDPC) as the collector. In addition to the effect of the collector type on the percent removal, the effects of the pH, the charcoal and collector doses, the metal ion concentration, the ionic strength and the use of combinations of NDPC with other reagents have been investigated. At the optimum conditions removals better then 97% could be achieved in the pH range of 7.5–10.0 with NDPC plus a low concentration of a low-molecular-weight polyacrylamide. The results obtained are discussed in terms of hydrolysis of the metal ion and the electric state of both the charcoal and collector.     

Separation of Co(II) from dilute aqueous solutions by precipitate and adsorbing colloid flotation

Ion, precipitate and adsorbing colloid flotation of cobalt(II) have been investigated at different pH values, using N-dodecylpyridinium chloride (DPCl), A strong cationic surfactant, and sodium lauryl sulfate (NaLS), a strong anionic surfactant, as collectors. In case of adsorbing colloid flotation, hydrous manganese dioxide was used as an adsorbent. The precipitate flotation curves experimentally obtained with the two tested collectors were compared with the corresponding theoretical one calculated from the data published for Co(II) hydrolysis. The effects of the collector concentration, ageing of the water-MnO₂–Co(II) system, bubbling time period, cobalt(II) concentration and foreign salts on the percent removal of Co(II) by adsorbing colloid flotation using DPCl as collector were determined. Removals approaching 100% could be achieved under the optimum conditions.     

Novel Synthesis of Dihydroquinoxalinylpyridazine Derivatives

Methylquinoxaline derivative 1 undergoes bromination to give bromomethyl quinoxaline 2 , which could be transferred to cyanomethyl quinoxaline 3 . The latter compound 3 readily coupled with arene diazonium salts to give hydrazone derivatives 5a‐c . Compounds 5a,b reacted with active methylene reagents to give the target ring system, quinoxalinylpyridazine derivatives 8a‐c . Compound 1 reacted with DMFDMA to give the enamine derivative 9 , which coupled with arene diazonium salts to give the aldehydic hydrazone derivatives 10a‐c . Compound 10 reacted with active methylene compounds to give quinoxalinylpyridazine derivatives. UV characterization of some of the prepared compounds was reported.     

Determination of copper,lead, cadmium and zinc content in commercially valuable fish species from the Persian Gulf using derivative potentiometric stripping analysis

This study was performed to determine the concentrations of cadmium, lead, copper and zinc in the edible muscle of pelagic (Scomberomorus commerson, Chirocentrus dorab, Sphyraena jello, Rachycentron conadum, Thunus tonggol, and Tenualosa ilisha) and demersal (Nemipterus japonicas, Epinephelus coioides, Platycephalus indicus, Psettodes erumei, Pomadasys argenteus, and Acanthopagrus latus) fish species from the Persian Gulf during winter and summer. The samples were analyzed by the derivative potentiometric stripping technique; and the results were expressed as μg/g of wet weight. The obtained range of metals in fish species was 0.024–0.111 μg/g for cadmium, 0.057–0.471 μg/g for lead, 0.799–4.790 μg/g for copper and 3.226–11.390 μg/g for zinc. The study revealed that seasonal variation influenced the concentration of metals in the samples. The highest concentration of cadmium, lead, copper and zinc was found in Platycephalus indicus (0.147 μg/g), Acanthopagrus latus (0.534 μg/g), Psettodes erumei (5.294 μg/g) and Psettodes erumei (13.528 μg/g) in winter, respectively. Moreover, demersal fish species had higher cadmium, lead and zinc concentrations, but lower copper content than pelagic ones. Our study demonstrated that the estimated daily and weekly intakes of lead, copper and zinc, and estimated monthly intake of cadmium via consumption of fish flesh were below the PTDI, PTWI and PTMI values established by FAO/WHO.