Real-time tracking of hydrogen peroxide secreted by live cells using MnO2 nanoparticles intercalated layered doubled hydroxide nanohybrids

We report a facile and green method for the fabrication of new type of electrocatalysts based on MnO₂ nanoparticles incorporated on MgAl LDH P-type semiconductive channel and explore its practical applications as high-performance electrode materials for electrochemical biosensor. A series of MgAl layered doubled hydroxide (LDH) nanohybrids with fixed Mg/Al (M²⁺/M³⁺ atomic ratio of 3) and varied amount of MnCl₂.4H₂O are fabricated by a facile co-precipitation method. This approach demonstrates the combination of distinct properties including excellent intercalation features of LDH for entrapping nanoparticles and high loading of MnO₂ nanoparticles in the host layers of LDH. Among all samples, Mn5–MgAl with 0.04% loaded manganese has a good crystalline morphology. A well-dispersed MnO₂ nanoparticles encapsulated into the host matrix of hydrotalcite exhibit enhanced electrocatalytic activity towards the reduction of H₂O₂ as well as excellent stability, selectivity and reproducibility due to synergistic effect of good catalytic ability of MnO₂ and conductive MgAl LDH. Glass carbon electrode (GCE) modified with Mn5–MgAl possesses a wide linear range of 0.05–78 mM, lowest detection limit 5 μM (S/N = 3) and detection sensitivity of 0.9352 μAmM⁻¹. This outstanding performance enables it to be used for real-time tracking of H₂O₂ secreted by live HeLa cells. This work may provide new insight in clinical diagnosis, on-site environmental analysis and point of care testing devices.     

Some characterizations of almost limited operators

In this paper we give several characterizations of almost limited operators. Mainly, it is proved that an operator \(T:X\rightarrow E\) from a Banach space X into a \(\sigma \)-Dedekind complete Banach lattice E is almost limited if and only if \(\left\| T^{*}\left( f_{n}\right) \right\| \rightarrow 0\) for every positive weak\(^{*}\) null sequence \(\left( f_{n}\right) \) of \(E^{*}\). Moreover, we present some interesting connections between almost limited, almost Dunford–Pettis and limited operators.     

The behavior of a gas bubble in a shock wave

The phenomenon of thermal relaxation of the gas bubbles in a fluid behind a shock front is analyzed. The approach to solving the problem of heat transfer between a gas bubble and a fluid developed by the author is used to obtain a solution describing the initial stage of bubble collapse behind the shock front.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, pp. 187–189, September–October, 1993.     

Exponential Behavior of Solutions to Stochastic Integrodifferential Equations with Distributed Delays

In this work, we study the existence, uniqueness, and exponential asymptotic behavior of mild solutions to stochastic integrodifferential delay evolution equations. We assume that the non-delay part generates a C₀-semigroup.     

Determination of copper,lead, cadmium and zinc content in commercially valuable fish species from the Persian Gulf using derivative potentiometric stripping analysis

This study was performed to determine the concentrations of cadmium, lead, copper and zinc in the edible muscle of pelagic (Scomberomorus commerson, Chirocentrus dorab, Sphyraena jello, Rachycentron conadum, Thunus tonggol, and Tenualosa ilisha) and demersal (Nemipterus japonicas, Epinephelus coioides, Platycephalus indicus, Psettodes erumei, Pomadasys argenteus, and Acanthopagrus latus) fish species from the Persian Gulf during winter and summer. The samples were analyzed by the derivative potentiometric stripping technique; and the results were expressed as μg/g of wet weight. The obtained range of metals in fish species was 0.024–0.111 μg/g for cadmium, 0.057–0.471 μg/g for lead, 0.799–4.790 μg/g for copper and 3.226–11.390 μg/g for zinc. The study revealed that seasonal variation influenced the concentration of metals in the samples. The highest concentration of cadmium, lead, copper and zinc was found in Platycephalus indicus (0.147 μg/g), Acanthopagrus latus (0.534 μg/g), Psettodes erumei (5.294 μg/g) and Psettodes erumei (13.528 μg/g) in winter, respectively. Moreover, demersal fish species had higher cadmium, lead and zinc concentrations, but lower copper content than pelagic ones. Our study demonstrated that the estimated daily and weekly intakes of lead, copper and zinc, and estimated monthly intake of cadmium via consumption of fish flesh were below the PTDI, PTWI and PTMI values established by FAO/WHO.     

Local pressure components and surface tension of spherical interfaces. Thermodynamic versus mechanical definitions. I. A mesoscale modeling of droplets

We report mesoscale simulations of spherical drops to investigate the surface tension and mechanical properties. The Monte Carlo simulations are performed with the multibody potential commonly used in the many-body dissipative particle dynamics simulations. We establish here the calculation of the local normal and transverse components of the pressure tensor via the perturbation volume within the thermodynamic route. The different profiles of these components are compared to those calculated using the mechanical approach. To complete the mesoscale modeling of drops, we investigate the curvature dependence of the surface tension in order to calculate the Tolman's length, which is found to be negative.     

Effect of iridium loading on HZSM-5 for isomerization of n-heptane

The effect of iridium loading on the properties and catalytic isomerization of n-heptane over Ir-HZSM-5 is studied. Ir-HZSM-5 was prepared by impregnation method and subjected to isomerization process in the presence of flowing hydrogen gas. XRD and BET studies show that the presence of iridium stabilizes the crystalline structure of HZSM-5, leading to more ordered framework structure and larger surface area. TGA and FTIR results substantiate that iridium species interacts with OH group on the surface of HZSM-5. Pyridine FT-IR study verifies the interaction between iridium and surface OH group slightly increased the Bro¨nsted and Lewis acid sites without changing the lattice structure of HZSM-5. The presence of iridium and the increase of strong Lewis acid sites on HZSM-5 were found to bring an increase about 4.1%, 33.2% and 11.8% in conversion, selectivity and yield of n-heptane isomerization, respectively.     

Conductivity,structure, and thermal properties of chitosan‐based polymer electrolytes with nanofillers

This paper focus on the effect of nanosize (<50 nm BET) inorganic alumina (Al₂O₃) filler on the structural, conductivity, and thermal properties of chitosan‐based polymer electrolytes. Films of chitosan and its complexes were prepared using solution‐casting technique. Different amounts of Al₂O₃ viz., 3, 4.5, 6, 7.5, 9, 12, and 15 wt% were added to the highest room temperature conducting sample in the chitosan–salt system, i.e. sample containing 60 wt% chitosan–40 wt% NH₄SCN. The conductivity value of the sample is 1.29 × 10^?4 S cm^?1. On addition of 6 wt% Al₂O₃ filler the ionic conductivity increased to 5.86 × 10^?4 S cm^?1. The amide and amino peaks in the spectrum of chitosan at 1636 and 1551 cm^?1, respectively, shift to lower wavenumbers on addition of salt. The glass transition temperature T_g for the highest conducting composite is 190°C. The increase in T_g with increase in more than 6 wt% filler content is attributed to the increase in degree of crystallinity as proven from X‐ray diffraction studies. Copyright © 2009 John Wiley & Sons, Ltd.