Adsorption of CO2 on nitrogen-enriched activated carbon and zeolite 13X

Adsorption may be a potentially attractive alternative to capturing CO₂ from stationary sources in the context of Carbon Capture and Sequestration (CCS) technologies. Activated carbon and zeolites are state-of-art adsorbents which may be used for CO₂ adsorption, however physisorption alone tends to be insignificant at high temperatures. In the present work, commercial adsorbents have been impregnated with monoethanolamine (MEA) and triethanolamine (TEA) in order to investigate the effect of the modified surface chemistry on CO₂ adsorption, especially above room temperature. Adsorption isotherms for CO₂, N₂ and CH₄ were measured in a gravimetrically system in the pressure range of UHV to 10 bar, at 298 and 348 K for activated carbon and zeolite 13X supports. The adsorbed concentration of CO₂ was significantly higher than those of CH₄ and N₂ for both adsorbents in the whole pressure range studied, zeolite 13X showing a remarkable affinity for CO₂ at very low pressures. However, at 348 K, the adsorbed concentration of CO₂ decreases significantly. The supports impregnated with concentrated amine solutions and dried in air suffered a detrimental effect on the textural properties, although CO₂ uptake became much less susceptible to temperature increase. Impregnations carried out with dilute solution followed by drying in inert atmosphere yielded materials with very similar textural characteristics as compared to the parent support. CO₂ isotherms in such materials showed a significant change with similar capacities at 348 K as compared to the original support at 298 K in the case of activated carbons. The impregnated zeolite showed a decrease in adsorbed phase concentration in low pressures for a given temperature, but the adsorbed amount also seemed to be less affected by temperature. These results are promising and indicate that CO₂ adsorption may be enhanced despite high process temperatures (e.g. 348 K), if convenient impregnation and drying methods are applied.     

Optical properties of in situ doped and undoped titania nanocatalysts and doped titania sol-gel nanofilms

In this paper we present spectroscopic properties of doped and undoped titanium dioxide (TiO₂) as nanofilms prepared by the sol-gel process with rhodamine 6G doping and studied by photoacoustic absorption, excitation and emission spectroscopy. The absorption spectra of TiO₂ thin films doped with rhodamine 6G at very low concentration during their preparation show two absorption bands, one at 2.3 eV attributed to molecular dimmer formation, which is responsible for the fluorescence quenching of the sample and the other at 3.0 eV attributed to TiO₂ absorption, which subsequently yields a strong emission band at 600 nm. The electronic band structure and optical properties of the rutile phase of TiO₂ are calculated employing a fully relativistic, full-potential, linearized, augmented plane-wave (FPLAPW) method within the local density approximation (LDA). Comparison of this calculation with experimental data for TiO₂ films prepared for undoped sol-gels and by sputtering is performed.     

Effects of mean flow convection,quadrupole sources and vortex shedding on airfoil overall sound pressure level

This paper presents a further analysis of results of airfoil self-noise prediction obtained in the previous work using large eddy simulation and acoustic analogy. The physical mechanisms responsible for airfoil noise generation in the aerodynamic flows analyzed are a combination of turbulent and laminar boundary layers, as well as vortex shedding (VS) originated due to trailing edge bluntness. The primary interest here consists of evaluating the effects of mean flow convection, quadrupole sources and vortex shedding tonal noise on the overall sound pressure level (OASPL) of a NACA0012 airfoil at low and moderate freestream Mach numbers. The overall sound pressure level is the measured quantity which eventually would be the main concern in terms of noise generation for aircraft and wind energy companies, and regulating agencies. The Reynolds number based on the airfoil chord is fixed at _Rec=408,000${\mathit{Re}}_c=408,000$ for all flow configurations studied. The results demonstrate that, for moderate Mach numbers, mean flow effects and quadrupole sources considerably increase OASPL and, therefore, should be taken into account in the acoustic prediction. For a low Mach number flow with vortex shedding, it is observed that OASPL is higher when laminar boundary layer separation is the VS driving mechanism compared to trailing edge bluntness.     

The Influence of Hydrogen Loading Temperature on the Mechanical Strength of Optical Fibers

The influence of hydrogen loading temperature on the mechanical strength of optical fibers is investigated. Fibers subjected to high-pressure hydrogen loading at different temperatures were submitted to bend tests, and the results compared with those for pristine fibers. The Weibull probability distribution function was used to analyze the data of the mechanical bending strength of the fibers. Fiber strength is reduced by the presence of hydrogen, and this decrease is greater for higher hydrogen loading temperatures. The mechanical properties of the polymers used to coat fibers are affected by the hydrogen loading process and also by the increase in temperature. However, there is no evidence of cracks formation that might allow water to penetrate to the surface of the glass. Observation using scanning electron microscopy revealed that the morphology of fractures in nonhydrogen-loaded fibers have distinct fracture characteristics to that of fibers that are hydrogen loaded at 90°C and 120°C.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

Single-drop microextraction for the determination of manganese in seafood and water samples

We describe a method for single drop microextraction of manganese from fish, mollusk, and from natural waters using the reagent 1-(2-pyridylazo)-2-naphthol as the complexing agent and chloroform as the fluid extractor. After extraction, the analyte was directly submitted to graphite furnace electrothermal atomic absorption spectrometry. Once optimized, the method has a detection limit of 30 ng L^?1, a limit of quantification of 100 ng L^?1, and an enrichment factor of 16. Its accuracy was verified by applying the procedure to the following certified reference materials: apple leaves, spinach leaves, bovine liver, and mussel tissue. The procedure was also successfully applied to the determination of manganese in seafood and natural waters.

Structural and electronic properties of amorphous bismuth calcium borate from first-principle calculations

Structural Chemistry - We investigatethe electronic and structural properties of two new amorphous materials, Bi6Ca2O28B12 and Bi6Ca2 O28B11:Tm, using density functional theory with a short-range...