High-performance liquid chromatographic determination of cocaine and benzoylecgonine by direct injection of human blood plasma sample into an alkyl-diol-silica (ADS) precolumn

A column-switching high-performance liquid chromatographic method with UV detection for the determination of cocaine (COC) and benzoylecgonine (BZE) in human blood plasma samples is described. The method uses an alkyl-diol-silica ADS-C18 extraction precolumn. A 50- micro L plasma sample was introduced to the ADS precolumn in order to separate the analytes from proteins and endogenous compounds. The fraction containing COC and BZE was back-flushed and transferred to an Alltech mixed-mode C(18)/cation-exchange analytical column for final separation. The validation of the method revealed quantitative recoveries from 95.0 to 99.0% for COC at three different concentrations (0.5, 1.0 and 2.0 micro g mL(-1)), and from 96.0 to 99.0% for BZE at the same concentration levels with coefficients of variation <4.00% (n=5). The detection limit (signal to noise ratio (S/N)>3) was 0.03 micro g mL(-1) for all the compounds with an injection volume of 50 micro L. However, it was possible to enhance the sensitivity further by injecting larger plasma volumes, up to 200 micro L, at the same optimal conditions. The overlap of sample preparation, analysis and reconditioning of the extraction column, increase the overall sample throughput to 5 samples h(-1). The developed method has been applied to human blood plasma samples from subjects suspected of cocaine abuse.     

Determination of S-carboxymethyl-L-cysteine and some of its metabolites in urine and serum by high-performance liquid chromatography using fluorescent pre-column labelling.

Pre-column labelling techniques are described for the determination of S-carboxymethyl-L-cysteine (CMC) and its metabolites in urine and plasma samples by high-performance liquid chromatography (HPLC) without prior extraction. All substances containing an amino group were converted into fluorescent fluorenylmethyl derivatives with 9-fluorenylmethyloxycarbonyl chloride (FMOC). Deaminated or N-acetylated carbocysteine metabolites were coupled with 1-pyrenyldiazomethane (PDAM) to give fluorescent PDAM esters. Similar results were obtained with the two commercially available and stable diazomethane derivatives PDAM and 9-anthryldiazomethane (ADAM). Following double derivatization with PDAM and FMOC, in a single chromatographic run with two fluorescence detectors connected in series, amines and amino(carboxylic) acids could be detected by their FMOC residues and, simultaneously, carboxylic acids were detected as fluorescent PDAM esters. The (R) and (S) enantiomers of the sulphoxides of CMC, of methylcysteine and of N-acetyl CMC were separated, although the reversed-phase HPLC system did not contain a chiral additive or stationary phase designed for the separation of enantiomers. The methods do not include liquid extraction steps and can therefore be performed either manually or automatically using an HPLC autosampler. These methods were used for the investigation of a disputed pharmacogenetic polymorphism of S-oxidation of CMC in humans, which until now has most often been studied using paper chromatography. The described techniques were applied to the determination of CMC and its metabolites in human urine and plasma samples.     

Substituent control in the diastereoselectivity of dipolar cycloadditions of nitrones and their Zn(II) complexes with N-arylmaleimides

The π-π stacking interactions between maleimide's and nitrone's aromatic rings during the 1,3-dipolar cycloaddition were assumed to control the exo-endo selectivity of the reaction. The exo-endo ratios change during the reactions until they reach a constant value, which depends on the substituent. Electron-withdrawing groups favour the exo adduct while electron-donating groups favour the endo adduct. The nitrone ZnBr₂ complexes react much more slowly than the free nitrone and the cycloaddition is exo selective in all cases independent of the substituents on the maleimide's aromatic ring. Thermal retrocycloaddition of the cycloadducts produce the corresponding nitrones. The ring opening in the presence of secondary amines did not induce imine formation. endo Adducts were shown for the first time to be the stable paramagnetic compounds.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

Selective influencing of the migration time of SO4(2-) by forming neutral species with Pb2+ in capillary zone electrophoresis.

Organic and inorganic anions are analyzed using capillary zone electrophoresis with indirect fluorescence detection. As electrolyte 2,5-dihydroxybenzoic acid is used. By adding Pb2+ to the electrolyte the migration time of SO4(2-) can be selectively influenced and the separation of Cl- and SO4(2-) considerably improved. The fluorescence intensity of 2,5-dihydroxybenzoic acid increases in the presence of Pb2+ up to a concentration of 6*10(-4) mol/L Pb2+. Limits of detection in the lower mumol/L range were obtained.     

Determination of affinity constants and response factors of the noncovalent dimer of gramicidin by electrospray ionization mass spectrometry and mathematical modeling

The dimerization of gramicidin, a 15-residue membrane peptide, in solution can be viewed as a model for protein-protein interactions. We reported previously that the dimer can be observed when electrosprayed from organic solvents and that the abundances of the dimer depends on the dielectric constant of the solvent. Here, we report an effort to determine an affinity constant for the dimerization of gramicidin by using gas-phase abundance. Two issues affecting the determination are the electrospray-induced dissociation of the dimer and discrimination in the electrospray of the dimer compared with the monomer. Other methods developed for the purpose of determining affinity from mass spectral abundance do not address the dissociation of the complex in the gas phase or can not be applied for cases of low affinity constant, K(a). We present a mathematical model that uses the ratio of the signal intensities of the dimer and the monomer during a titration. The model also incorporates the dissociation and an electrospray ionization-response factor of the dimer for extracting the affinity constant for the dimerization of gramicidin. The dimerization constants from the new method agree within a factor of two with values reported in the literature.     

Diffraction dissociation of nuclei in 450 GeV/c proton-nucleus collisions

Diffractive dissociation of nuclei (Be, Al, W) in collisions with 450 GeV/c protons,pApX, has been measured with the HELIOS spectrometer at the CERN Super Proton synchrotron. The dependence of the single-diffraction cross-section on the nuclear massA can be parametrized as _SD mb×A ^0.35±0.02, showing the peripheral nature of the process. The differential cross-section d_SD=(3.8±0.3)mb ×A ^0.35±0.02, is exponential with the slope parameter, increasing from 6.2±0.4 (GeV/c)^–2 for beryllium to 7.9±0.5 (GeV/c)^–2 for tungsten. The slope parameter also increases with increasing massM _X of the diffractively produced state. The rapidity, multiplicity, and transverse-momentum distributions of the particles of the diffractively produced stateX show a longitudinal phase-space population and are remarkably insensitive to the nuclear mass. This, together with theA ^1/3 dependence of _SD, suggests that the dominant process of nuclear diffractive excitation is the dissociation of single nucleons.Deceased     

Determination of plasma amitriptyline by electron-capture gas chromatography after oxidation to anthraquinone.

A selective procedure is described for the determination of amitriptyline in plasma. The method involves extraction, separation of amitriptyline from its metabolites and subsequent oxidation by ceric sulphate in 5.4 M sulphuric acid. The oxidation product, anthraquinone, is determined by means of electron-capture gas chromatography. The metabolites were separated by a column chromatographic extraction technique. The choice of oxidation reagent, optimum conditions for the oxidation, and the electron-capture properties of anthraquinone are discussed. The method can be used to determine down to 2 ng of amitriptyline in a plasma sample; the relative standard deviation at the 50-ng level was 4.0% (n = 8). The levels of amitriptyline found in a series of plasma samples are compared with those obtained by gas chromatography with use of nitrogen-specific detection; the two techniques gave coincident results.     

Investigation of a cylindrical chemosorptive denuder for sampling and phase separation of toluene diisocyanate aerosols

A cylindrical chemosorptive denuder in series with a glass fibre filter has been evaluated for sampling toluene diisocyanate (TDI) aerosols. The sampler is designed for measuring personal exposure to diisocyanates. Several denuder coatings and derivatising reagents were investigated. Dimethylpolysiloxane (SE-30) and 5% phenyl dimethylpolysiloxane (SE-54) with either dibutylamine (DBA) or dipentylamine (DPeA) as derivatising reagents yielded the lowest vapour breakthrough (the amount (%) of the vapour that passes through the denuder), close to values predicted by theory. Immobilisation of the SE-30 denuder coating by in-situ cross-linking yielded comparable results. With an SE-30/DBA-coated denuder operating within an airflow range of 100–500 mL min^–1, the phase separation was shown to be consistent with theoretical predictions derived by use of the Gormley–Kennedy equation. This provides a means of calculating the vapour breakthrough and correcting experimentally obtained values with regard to vapour–particulate phase distribution, suggesting that the denuder can provide accurate phase-distribution measurements. The SE-30/DBA denuder can be used over a concentration range spanning nearly six orders of magnitude. Its capacity is sufficient to perform 15-min exposure measurements of a TDI aerosol with air concentrations as high as 1,700 g m^–3, 40 times higher than the Swedish occupational exposure limit (OEL). At the other end of the range, the estimated limit of detection (LOD) was less than 2 ng m^–3 for both the vapour and the aerosol phases when LC–ESI–MS–MS was used for chemical analysis.Electronic Supplementary Material Supplementary material for this article is available at