Synthesis and characterization of Ni(II) complexes bearing of 2‐(1H–benzimidazol‐2‐yl)‐phenol derivatives as highly active catalysts for ethylene oligomerization

Novel Ni(II) complexes of 2‐(1H–benzimidazol‐2‐yl)‐phenol derivatives (HL_x: x  =  1–5; C1–C5 ) have been synthesized and characterized. In the mononuclear complexes, the ligands were coordinated as bidentate, via one imine nitrogen and the phenolate oxygen atoms. The structures of the compounds were confirmed on the basis of FT‐IR, UV–Vis, ¹H‐, ¹³C–NMR, inductively coupled plasma and elemental analyses (C, H and N). The purity of these compounds was ascertained by melting point (m.p.) and thin‐layer chromatography. The geometry optimization and vibrational frequency calculations of the compounds were performed using Gaussian 09 program with B3LYP/TZVP level of theory. All Ni(II) complexes were activated with diethylaluminum chloride (Et₂AlCl), so that C2 showed the highest activity [6600 kg mol^?1 (Ni) h^?1], where the ligand contains a chlorine substituent. Oligomers obtained from the complexes consist mainly of dimer and trimer, and also exhibit high selectivity for linear 1‐butene and 1‐hexene. Both the steric and electronic effects of coordinative ligands affect the catalytic activity and the properties of the catalytic products.     

One‐Pot Synthesis of Cu2O/ZnO Nanoparticles at Present of Folic Acid to Improve UV‐Protective Effect of Cotton Fabrics

In this study, the effect of using folic acid on the in situ synthesis process of nanostructures has been investigated. Folic acid, as a biotemplate for synthesis of Cu₂O/ZnO, was used to improve the reducing and stabilizing the ability of cotton fabric and avoid agglomeration of the particles. Scanning electron microscopy images revealed that using folic acid caused the formation of particles with smaller sizes on the cotton fabric and X‐ray diffraction confirmed the same crystalline pattern of nanoparticles in comparison with the previous synthesis process. The effect of using this biotemplate on different properties of treated fabrics including UV‐protection effect, hydrophilicity, crease recovery angle, softness, thickness and mechanical properties has been evaluated. The folic acid had a great influence on UV‐protection effect, in synthesis procedure, decreasing the droplet absorption time, bending length and improving the wrinkle resistance and mechanical properties. Interestingly, the higher tensile strength of the treated cotton fabrics proved the incorporation of nanoparticles into the cotton fibers. An in situ, green and rapid method can be provided by using folic acid for the synthesis of the nanostructures with controlled size.     

Microfluidic system for measuring neutrophil migratory responses to fast switches of chemical gradients

Experimental systems that provide temporal and spatial control of chemical gradients are required for probing into the complex mechanisms of eukaryotic cell chemotaxis. However, no current technique can simultaneously generate stable chemical gradients and allow fast gradient changes. We developed a microfluidic system with microstructured membranes for exposing neutrophils to fast and precise changes between stable, linear gradients of the known chemoattractant Interleukin-8 (IL-8). We observed that rapidly lowering the average concentration of IL-8 within a gradient, while preserving the direction of the gradient, resulted in temporary neutrophil depolarization. Fast reversal of the gradient direction while increasing or decreasing the average concentration also resulted in temporary depolarization. Neutrophils adapted and maintained their directional motility, only when the average gradient concentration was increased and the direction of the gradient preserved. Based on these observations we propose a two-component temporal sensing mechanism that uses variations of chemokine concentration averaged over the entire cell surface and localized at the leading edge, respectively, and directs neutrophil responses to changes in their chemical microenvironment.     

Syntheses and spectroscopic investigation of some cyclophosphazanes: Analysis of pseudo‐triplet splitting

Some new phosphoramidates, 1–3 , and the corresponding cyclophosphazanes, 4–6 , with formula Cl₂P(p‐NHC₆H₄CH₃) 1 , Cl₂P(O)(p‐NHC₆H₄NO₂) 2 , (CH₃)₂NP(O)Cl(p‐NHC₆H₄CH₃) 3 , [ClP(p‐NC₆H₄CH₃)]₂ 4 , [ClP(O)(p‐NC₆H₄NO₂)]₂ 5 , and [(CH₃)₂NP(O)(p‐NC₆H₄CH₃)]₂ 6 were synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR, mass spectroscopy, and elemental analysis. A pseudo‐triplet signal was observed in the ¹H NMR spectrum of molecule 6 for the N(CH₃)₂ protons. The A₆A′ ₆X₂ spin system was suggested for the pseudo‐triplet pattern of ³J_PNCH coupling in this molecule. Ab initio calculations were performed at the HF and B3LYP levels of theory with 6‐311G^** standard basis set on the geometry of compound 6 . Also, the NMR chemical shift calculations were done to compare the computed results with the experimental ones. The calculated results are in good agreement with experimental data. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:337–343, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20229     

Dipyridylamine-modified nanoporous silicas as new sorbents for the separation and pre-concentration of palladium

Nanoporous silicas of the type SBA-15 (Santa Barbara Amorphous) and MCM-48 (Mobile Composition of Material) were modified with dipyridylamine (dipy) and used as solid phases for the extraction of Pd(II) ions. The experimental conditions (pH, sample and eluent flow rates, type and quantity of eluent) were optimized. The recovery values were ~ 99.7 and ~ 93.4% for dipy-MCM-48 and dipy-SBA-15, respectively, the limits of detection were <0.08 and <0.11 ng L^?1, the pre-concentration factors were 725 and 550, and the adsorption capacity was >78 mg g^?1. The procedure was applied to the preconcentration of Pd(II) in real samples.

Synthesis of hydrogenated indazole derivatives starting with α,β-unsaturated ketones and hydrazine derivatives

The reaction of hydrazine derivatives with α,β-unsaturated ketones, such as cyclohexenyl(phenyl)methanone and (E)-2-benzylidenecyclohexanone, were investigated.The reaction between methylhydrazine and e.g., cyclohexenyl(phenyl)methanone was particularly interesting as 3a,4,5,6,7,7a-hexahydro-1-methyl-3-phenyl-1H-indazole was obtained as the major product together with 4,5,6,7-tetrahydro-2-methyl-3-phenyl-2H-indazole as a minor product.     

Solid Phase Extraction of Lead(II) by Sorption on Grinded Eucalyptus Stem and Determination with Flame Atomic Absorption Spectrometry

A sensitive and simple solid‐phase preconcentration procedure for the determination of trace amount of lead by flame atomic absorption spectrometry (FAAS) is developed. The method is based on the adsorption of Pb²⁺ on the column of fine grinded eucalyptus stem adsorbent, elution of the column by nitric acid and subsequent determination by FAAS. The effect of different variables such as pH, eluent type, flow rate and interfering ions on the recovery of the analyte was investigated and optimum conditions were established. The adsorption of lead onto fine grinded eucalyptus stem can formally be described by a Langmuir equation with a maximum adsorption capacity of 4.49 mg g^?1. A preconcentration factor of 50 was achieved using the optimum conditions. The calibration graph was linear in the range 10–125 ng mL^?1 of lead in the initial solution with r = 0.9982. The limit of detection based on 3S_b criterion was 4.5 ng mL^?1 and the relative standard deviation for eight replicate measurements of 30 and 80 ng mL^?1 of iron was 3.6 and 2.8%, respectively. The method was successfully applied to the determination of lead added to well, tap and wastewater samples.     

Synthesis new Co–Mn mixed oxide catalyst for the production of light olefins by tuning the catalyst structure

In order to increase the catalyst activity for Fischer–Tropsch synthesis (FTS), the preparation methods of two new catalysts were studied. The chemically identical bimetallic Co–Mn/Al₂O₃ catalysts were synthesized by different synthetic methods: (a) via thermal decomposition of the complex [Co_1.33Mn_0.667(C₇H₃NO₄)₂(H₂O)₅].2H₂O ( 1 ) and (b) by the impregnation technique. The complex was characterized by the single‐crystal analysis, elemental analysis, and Fourier‐transform infrared (FT‐IR) spectroscopy. Both catalysts were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectrometry (EDS), Brunauer–Emmett–Teller (BET) specific surface area, hydrogen temperature‐programmed reduction (H₂‐TPR), and H₂‐chemisorption. The catalysts' activity was investigated for the Fischer–Tropsch synthesis in a fixed bed microreactor. Higher activity was obtained for the catalyst prepared by thermal decomposition of the inorganic precursor due to its small particle size, superior dispersion, and higher surface area. The results show that the catalyst prepared thermal decomposition has 21% ethylene, 10% propylene, and 50% C₅⁺ selectivity, while methane selectivity of this catalyst is 11% at 250°C. On the other hand, the catalyst obtained by the impregnation method displays 15% ethylene, 8% propylene, 29% C₅⁺_, and 29% methane selectivity at the same temperature.     

Gliclazide as novel carrier in construction of PVC-based La(III)-selective membrane sensor

A PVC-based sensor for La³⁺ ions based on N-[hexahydrocyclopentapyrol-2((1H)yl)amino]carbonyl]-4-methyl benzene sulfonamide (gliclazide) as a novel carrier was prepared. The electrode exhibits a Nernstian response for La³⁺ over a wide concentration range (1.0×10⁻¹-1.0×10⁻⁶ M) with a slope of 20.1 mV per decade. The limit of detection is 8.0×10⁻⁷ M. The sensor has a very short response time (<15 s) and a useful working pH range of 4.0-8.0. The proposed membrane sensor shows excellent discriminating ability towards La³⁺ ions with regard to several alkali, alkaline earth, transition and heavy metal ions. The electrode was successfully applied for determination of La³⁺ in binary mixtures.