Protective role of estrogen against excessive erythrocytosis in Monge’s disease

Monge’s disease (chronic mountain sickness (CMS)) is a maladaptive condition caused by chronic (years) exposure to high-altitude hypoxia. One of the defining features of CMS is excessive erythrocytosis with extremely high hematocrit levels. In the Andean population, CMS prevalence is vastly different between males and females, being rare in females. Furthermore, there is a sharp increase in CMS incidence in females after menopause. In this study, we assessed the role of sex hormones (testosterone, progesterone, and estrogen) in CMS and non-CMS cells using a well-characterized in vitro erythroid platform. While we found that there was a mild (nonsignificant) increase in RBC production with testosterone, we observed that estrogen, in physiologic concentrations, reduced sharply CD235a⁺ cells (glycophorin A; a marker of RBC), from 56% in the untreated CMS cells to 10% in the treated CMS cells, in a stage-specific and dose-responsive manner. At the molecular level, we determined that estrogen has a direct effect on GATA1, remarkably decreasing the messenger RNA (mRNA) and protein levels of GATA1 (p < 0.01) and its target genes (Alas2, BclxL, and Epor, p < 0.001). These changes result in a significant increase in apoptosis of erythroid cells. We also demonstrate that estrogen regulates erythropoiesis in CMS patients through estrogen beta signaling and that its inhibition can diminish the effects of estrogen by significantly increasing HIF1, VEGF, and GATA1 mRNA levels. Taken altogether, our results indicate that estrogen has a major impact on the regulation of erythropoiesis, particularly under chronic hypoxic conditions, and has the potential to treat blood diseases, such as high altitude severe erythrocytosis.Subject terms: Haematopoietic stem cells, Myeloproliferative disease     

Excellent photocatalytic reduction of nitroarenes to aminoarenes by BiVO4 nanoparticles grafted on reduced graphene oxide (rGO/BiVO4)

A novel heterogeneous composite material based on reduced graphene oxide (rGO) and bismuth vanadate (BiVO₄) was prepared and characterized by various techniques such as powder XRD, HRTEM, EADX, UV–Vis‐DRS, FT‐IR, Raman, BET and XPS analyses. The characterization results reveal that the rGO well decorated by BiVO₄. The electrochemical impedance spectroscopy (EIS) shows the increasing of charge transfer of rGO/BiVO₄ in presence of light irradiation. In this research, the pure BiVO₄ and rGO/BiVO₄ composite have been explored for photocatalytic reduction of nitroarenes. Among the prepared nanocomposites, rGO loaded with 10% BiVO₄ catalyst (noted as rGO/BiVO₄–10%) shows the best performance for the photo‐reduction of various nitroaromatic molecules to their corresponding amine compounds under visible‐light irradiation at room temperature. The catalyst exhibited in particular excellent photocatalytic activity for the conversion of 1,4‐dinitrobenzene to 4‐nitroanilline (100% conversion) in 20 min, 4‐chloronitrobenzene to 4‐chloroaniline and 2‐nitrophenol to 2‐aminophenol (100% conversion) in only 30 min. In addition, the conversion of 4‐bromonitrobenzene, 4‐iodonitrobenzene to their corresponding amine compounds (100% conversion) was achieved in 60 min. The catalyst was recovered for several times and reused without decreasing of its efficiency.     

Identification of potential complementary serum biomarkers to differentiate prostate cancer from benign prostatic hyperplasia using gel- and lectin-based proteomics analyses

Diagnosis of prostate cancer (PCa) is currently much reliant on the invasive and time-consuming transrectal ultrasound-guided biopsy of the prostate gland, particularly in light of the inefficient use of prostate-specific antigen as its biomarker. In the present study, we have profiled the sera of patients with PCa and benign prostatic hyperplasia (BPH) using the gel- and lectin-based proteomics methods and demonstrated the significant differential expression of apolipoprotein AII, complement C3 beta chain fragment, inter-alpha-trypsin inhibitor heavy chain 4 fragment, transthyretin, alpha-1-antitrypsin, and high molecular weight kininogen (light chain) between the two groups of patients' samples. Our data are suggestive of the potential use of the serum proteins as complementary biomarkers to effectively discriminate PCa from BPH, although this requires further extensive validation on clinically representative populations.     

Orientation dependent far-infrared terahertz absorptions in single crystal pentaerythritol tetranitrate (PETN) using terahertz time-domain spectroscopy

Terahertz time-domain spectroscopy (THZ-TDS) has been used to measure the absorption spectra in the range 7-100 cm(-1) (0.2-3 THz) of single crystal pentaerythritol tetranitrate (PETN). Absorption was measured in transmission mode as a function of incident polarization with the incident and transmitted wave vectors oriented along the crystallographic directions [100], <10(a/c)(2)>, and <110>. Samples were rotated with respect to the incident polarization while absorption was measured at both 300 and 20 K. Comparatively minor differences were observed among the three orientations. Two broad absorptions at 72 and >90 cm(-1), and several weaker absorptions at 36, 55, 80, and 82 cm(-1), have been observed at cryogenic temperatures.     

Metallo-tetraazaporphyrin based anion sensors: regulation of sensor characteristics through central metal ion coordination

The iron(III) and cobalt(III) complexes of 2,3,7,8,12,13,17,18-octakis(benzylthio)-5,10,15,20-tetraazaporphyrin, (OBTAP) were synthesized and incorporated into PVC matrix as ionophores to fabricate anion selective membrane electrodes that exhibit selective potentiometric response to azide and nitrite ions, respectively. The membrane of [Fe(OBTAP)]⁺ (III) with a composition of 6:190:200 (III:DBP:PVC) (w/w), and of [Co(OBTAP)]⁺ (IV) with a composition of 10:148:200 (IV:DOP:PVC) (w/w), i.e. 1a and 2b, respectively (where DBP:dibutylphthalate and DOP=dioctylphthalate) gave the best performance. The membrane 1a showed a slope of 29.2±0.2 mV per decade of activity for N₃⁻ in the working concentration range of 8.9×10⁻⁶ to 1.0×10⁻¹ M. The membrane 2b showed a slope of 30.0±0.2 mV per decade of activity for NO₂⁻ in the working concentration range of 1.1×10⁻⁵ to 1.0×10⁻¹ M. The membranes worked satisfactorily in the pH range of 4.3-10.5 (1a) and 2.8-6.4 (2b) and had fast response time of 12±2 and 13±2 s, respectively. Electrodes exhibited a high degree of selectivity for N₃⁻ and NO₂⁻, respectively, over several other monovalent and bivalent anions. Only SCN⁻ and S²⁻ (at >1.0×10⁻⁴ M) cause moderate interference for electrode 1a and Cl⁻ and S²⁻ (at >1.0×10⁻⁵ M) for electrode 2b. They gave reproducible results with the relative standard deviation in the observed values of potentials (σ) of 1.96 and 1.80 mV for electrodes 1a and 2b, respectively, from the least-squares fit line. The 90% confidence limit lies within ±0.2 mV per decade of activity. Reproducible results were obtained over a period of 5 months. Their performance in non-aqueous solvent mixtures having up to 50% (v/v) methanol, ethanol and acetone were evaluated and were found satisfactory. The proposed sensors are superior in terms of detection limit and response time in comparison to the reported ones.     

Preparation of ethambutol-copper(II) complex and fabrication of PVC based membrane potentiometric sensor for copper

Copper(II) complex of ethambutol (I) was prepared and used in the fabrication of Cu(2+) selective ISE membrane. The membrane having Cu(II)-ethambutol complex (I) as electroactive material, along with sodium tetraphenylborate (NaTPB) as anion discriminator, dioctylphthalate (DOP) as plasticizer in poly(vinyl chloride) (PVC) matrix in the percentage ratio 6:2:190:200 (I:NaTPB:DOP:PVC) (w/w) gave a linear response in the concentration range 7.94x10(-6) to 1.0x10(-1) M of Cu(2+) with a slope of 29.9+/-0.2 mV per decade of activity and a fast response time of 11+/-2 s. The sensor works well in the pH range 2.1-6.3 and could be satisfactorily used in presence of 40% (v/v) methanol, ethanol and acetone and is selective for copper over a large number of cations with slight interference from Na(+) and Co(2+) if present at a level 1.5x10(-5) and 6.5x10(-5) M, respectively. It works well over a period of 6 months and can also be used as indicator electrode for the end point determination in the potentiometric titration of Cu(2+) against EDTA as well as in the determination of Cu(2+) in real samples.     

On-column derivatization of the antibiotics teicoplanin and ristocetin coupled to affinity capillary electrophoresis

Binding constants between the glycopeptides teicoplanin (Teic) and ristocetin (Rist) and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column receptor synthesis coupled to partial-filling affinity capillary electrophoresis (PFACE) or affinity capillary electrophoresis (ACE). In these techniques, the column is first partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides. This is followed by plugs of buffer, antibiotic and two noninteracting standards, and acetic and/or succinic anhydride (and buffer in the case of ACE). The order of the reagent plugs containing the antibiotic and anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in the relative migration time ratio (RMTR) of the new glycopeptide relative to the standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant K(b). The techniques described here can be used to assess how the derivatization of drugs alters their affinities for target molecules.     

Zinc oxide nanorod‐loaded activated carbon for ultrasound‐assisted adsorption of safranin O: Central composite design and genetic algorithm optimization

This paper focuses on the development of an effective methodology to obtain the optimum ultrasonic‐assisted removal of a dye, safranin O (SO), under optimum conditions that maximize the removal percentage, using ZnO nanorod‐loaded activated carbon (ZnO‐NRs‐AC) in aqueous solution. Central composite design coupled with genetic algorithm was used for parameter optimization. The effects of variables such as pH, initial dye concentration, mass of ZnO‐NRs‐AC and sonication time were studied. The interactive and main effects of these variables were evaluated using analysis of variance. The structural and physicochemical properties of the ZnO‐NRs‐AC adsorbent were investigated using field emission scanning electron microscopy and X‐ray diffraction. Adsorption equilibrium data were fitted well with the Langmuir isotherm and the maximum monolayer capacity was found to be 32.06 mg g^?1. Studies of the adsorption kinetics of the SO dye showed a rapid sorption dynamic with a ^pseudo‐second‐order kinetic model, suggesting a chemisorption mechanism.     

Correction for polarization effects in proton-proton scattering in a perturbation quantum-chromodhnamics framework

The differential effective cross sections of proton-proton scattering and the Drell-Jahn process are calculated using perturbation quantum chromodynamics in a Fermi-Feynmann gauge, and the spin asymmetry of the hadrons is found. M. é. Rasulzade Baku State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 105–110, July, 1996.     

Nano-enabled microtechnology: polysulfone nanocomposites incorporating cellulose nanocrystals

Microchannel devices hold the potential to transform many separation processes. This preliminary study investigated the feasibility of incorporating cellulose nanocrystals (CNXLs) into polysulfone, a commonly used ultrafiltration membrane polymer. Incorporating CNXLs into non-water soluble polymers without aggregation has been problematic. A solvent exchange process was developed that successfully transferred an aqueous CNXL dispersion into the organic solvent N-methylpyrrolidone (NMP), which is a solvent for polysulfone (PSf). Films were prepared from the solution of PSf in NMP with dispersed CNXLs by a phase inversion process. Films were then examined by scanning electron microscopy and tested for their transport and mechanical properties. The interaction between the polymer matrix and the CNXL filler was studied by means of thermogravimetric analysis (TGA), which suggested a close interaction between the polymer and filler at the 2% filler loading. The tensile modulus showed a large increase beyond 1% filler loading, which could be due to a percolation effect. The water vapor transport rate increased with increase in filler loading. Agglomeration of the CNXLs seemed to be taking place at filler loadings >7%.