Novel enantiocontrol system with aminoacyl derivatives of glucoside as enamine-based organocatalysts for aldol reaction in aqueous media

Introduction of carbohydrate auxiliary into enanine-based catalyst provided a novel enantiocontrol for aqueous aldol reaction. Methyl 2-(l-prolyl)amido-2-deoxy-α-d-glucopyranosides led to the enantiocontrol as parent amino acids did in the reaction of acetone with 4-nitrobenzaldehyde, and provided R-aldol in an improved efficiency compared with that of l-proline in aqueous media. The enantioreversal control of that with parent amino acid was observed in the reaction with methyl 2-(l-tert-leucyloxy)-α-d-glucopyranoside, which provided S-aldol predominantly in moderate efficiency. The novel enantiocontrol system was proposed to occur as a result of the generation of the transition state through the reaction of enamine with hydroxyl group on glucoside auxiliary.     

Ultrafast excitation relaxation dynamics of lutein in solution and in the light-harvesting complexes II isolated from Arabidopsis thaliana

Ultrafast excitation relaxation dynamics and energy-transfer processes in the light-harvesting complex II (LHC II) of Arabidopsis thaliana were examined at physiological temperature using femtosecond time-resolved fluorescence spectroscopy. Energy transfer from lutein to Chl a proceeded with a rate constant of k(ET) = 1.8-1.9 x 10(13) s(-1) and a yield of approximately Phi(ET) = 0.70, whereas that from neoxanthin to Chl a had a rate constant of k(ET) = 6.5 x 10(11) s(-1) and a yield at the most of Phi(ET) = 0.09. Fluorescence anisotropic decay of lutein in LHC II showed a value larger than 0.4 at the initial state and decayed to approximately 0.1 in 0.3 ps, indicating that two lutein molecules interact with each other in LHC II. In solution, anisotropy of lutein remained constant (0.38) independent of time, and thus a new excited state inferred between the S(2) (1B(u)) state and the S(1) (2A(g)) state was not applicable for lutein in solution. Energy migration processes among Chl a or Chl b molecules were clearly resolved by kinetic analysis. On the basis of these results, relaxation processes and energy-transfer kinetics in LHC II of A. thaliana are discussed.     

Defection-selective solubilization and chemically-responsive solubility switching of single-walled carbon nanotubes with cucurbit[7]uril

Single-walled carbon nanotubes (SWCNTs) were suspended in aqueous media with cucurbit[7]uril (CB7), while SWCNTs were insoluble with cucurbit[5]uril (CB5). Moreover, defection-selective solubilization of SWCNTs with CB7 was demonstrated.     

Pseudorotaxane-like supramolecular complex of coenzyme Q10 with gamma-cyclodextrin formed by solubility method

The purpose of this study is to reveal whether Coenzyme Q10 (CoQ10) forms pseudorotaxane-like supramolecular complex with gamma-cyclodextrin (gamma-CyD). The poorly soluble complex of CoQ10 with gamma-CyD in water was prepared by the solubility method. The X-ray diffraction pattern of the CoQ10/gamma-CyD complex was different from that of the physical mixture, but almost the same as that of polypropylene glycol (PPG)/gamma-CyD polypseudorotaxane. Also, the differential scanning calorimetrical study and FT-IR study demonstrated the interaction between CoQ10 and gamma-CyD in the solid state. The 1H-NMR study and the yield study of the supramolecular complex of CoQ10 with gamma-CyD demonstrated that the stoichiometry was 5 : 1 (gamma-CyD : CoQ10). The dispersion rate of CoQ10 was markedly increased by the formation of the supramolecular complex with gamma-CyD, possibly due to submicron-ordered particle formulation. In fact, CoQ10 was found to form submicron-sized supramolecular particles with gamma-CyD, when prepared by the solubility method. Consequently, the present study showed that CoQ10 forms the pseudorotaxane-like supramolecular complex with gamma-CyD in water.     

Real-time observation on surface diffusion and molecular orientations for phthalocyanine thin films at nanometer spacial resolution

The morphology, electronic structure and ordering of the phthalocyanine thin films have been investigated at nanometer scale by photoelectron emission microscopy (PEEM) excited by polarized soft X-rays from synchrotron light source. The sample investigated was micropattern of silicon phthalocyanine deposited on gold surface. The incident angle dependences of the X-ray absorption near edge structure (XANES) spectra at the silicon K-edge revealed that the molecules of 5-layered films are lying nearly flat on the surface. Clear image of the micropattern was observed by PEEM, showing that the molecules are deposited via Volmer–Weber (VW) mode at room temperature. While, the surface diffusion was observed upon heating, and the micropattern image almost disappeared at 240 °C, representing the deposition mode changes from VW-mode to Frank–van der Merwe (FM)-one. On the basis of the photon-energy dependences of the brightnesses in the PEEM images, it was found that the molecules diffusing to the fresh gold surface rather stand-up at 240 °C. The observed changes in the molecular orientations at nanometer domains are discussed on the basis of the strengths of the molecule–molecule and molecule–surface interactions.     

Synthesis of poly(vinyl ether) polyols with pendant oxyethylene chains and properties of hydrophilic,thermo‐responsive polyurethanes prepared therefrom

Hydroxy‐terminated telechelic poly(vinyl ether)s with pendant oxyethylene chains were synthesized by the reaction of the CH₃CH(OCOCH₃)? O[CH₂]₄O? CH(OCOCH₃)CH₃/Et_1.5AlCl_1.5/THF‐based bifunctional living cationic polymers of 2‐methoxyethyl vinyl ether (MOVE), 2‐ethoxyethyl vinyl ether (EOVE), and 2‐(2‐methoxyethoxy)ethyl vinyl ether (MOEOVE) with water and the subsequent reduction of the aldehyde polymer terminals with NaBH₄. The obtained poly(vinyl ether) polyols were reacted with an equimolar amount of toluene diisocyanates [a mixture of 2,4‐ (80%) and 2,6‐ (20%) isomers] to give water‐soluble polyurethanes. The aqueous solutions of these polyurethanes caused thermally induced precipitation at a particular temperature depending on the sort of the thermosensitive poly(vinyl ether) segments containing oxyethylene side chains. These polyurethanes also function as polymeric surfactants, lowered the surface tension of their aqueous solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1641–1648, 2010     

Design, construction, and characterization of high-performance membrane fusion devices with target-selectivity

Membrane fusion proteins such as the hemagglutinin glycoprotein have target recognition and fusion accelerative domains, where some synergistically working elements are essential for target-selective and highly effective native membrane fusion systems. In this work, novel membrane fusion devices bearing such domains were designed and constructed. We selected a phenylboronic acid derivative as a recognition domain for a sugar-like target and a transmembrane-peptide (Leu-Ala sequence) domain interacting with the target membrane, forming a stable hydrophobic α-helix and accelerating the fusion process. Artificial membrane fusion behavior between the synthetic devices in which pilot and target liposomes were incorporated was characterized by lipid-mixing and inner-leaflet lipid-mixing assays. Consequently, the devices bearing both the recognition and transmembrane domains brought about a remarkable increase in the initial rate for the membrane fusion compared with the devices containing the recognition domain alone. In addition, a weakly acidic pH-responsive device was also constructed by replacing three Leu residues in the transmembrane-peptide domain by Glu residues. The presence of Glu residues made the acidic pH-dependent hydrophobic α-helix formation possible as expected. The target-selective liposome-liposome fusion was accelerated in a weakly acidic pH range when the Glu-substituted device was incorporated in pilot liposomes. The use of this pH-responsive device seems to be a potential strategy for novel applications in a liposome-based delivery system.     

Cation‐Tuned Stimuli‐Responsive and Optical Properties of Supramolecular Hydrogels

Hierarchical self‐assembly of an amphiphilic tris‐urea in aqueous media is shown. A mixture of the amphiphilic tris‐urea and an alkaline solution gave a viscous solution composed of fibrous aggregates. This viscous solution transformed into supramolecular hydrogels, which are capable of hierarchically organizing into higher‐order aggregates in response to several cationic triggers. The resulting supramolecular hydrogels were relatively stiff and their storage moduli attained over 10³ Pa. The stimuli‐responsive and optical properties of the resulting hydrogels were influenced by the cationic trigger. Proton and calcium ion triggers gave pH‐ and chemical stimuli‐responsive hydrogels, respectively. A terbium ion trigger also provided a highly luminescent hydrogel through energy transfer from the tris‐urea to terbium.