Intercalation of gaseous thiols and sulfides into Ag+ ion-exchanged aluminum dihydrogen triphosphate

Ag(+) ion-exchanged layered aluminum dihydrogen triphosphate (AlP) with the interlayer distance of 0.85 nm was synthesized by the ion-exchange of proton in triphosphate with Ag(+) ion. The amount of exchanged Ag(+) ion depended on the concentration of AgNO(3) aqueous solution. Ag(+) ion-exchanged AlP adsorbed gaseous thiols and sulfides into the interlayer region. The adsorption amounts of thiols were more than those of sulfides, thiols with one mercapto group > thiol with two mercapto groups > sulfides, and depended on the amount of exchanged Ag(+) ion in the interlayer region. The thiols with one mercapto group were intercalated to expand the interlayer distance of Ag(+) ion-exchanged AlP, whereas there was no expansion in the adsorption of sulfide. In the case of thiol with two mercapto groups, there was observed contraction of the interlayer distance through the bridging with Ag(+) ions of the upper and lower sides of the interlayer region.     

Diels-alder reactions of 2-pyrones with acyclic dienophiles and hydrolyses of the mono-adducts

Diels-Alder reactions of 2-pyrone (1) with fumaronitrile and maleonitrile afforded regio- and stereo-specific mono-adducts 3a and 3b , respectively. The reaction of 1 with acrylonitrile gave a bis-adduct. The reaction of 4,6-dimethyl-2-pyrone (7) with dimethyl fumarate and dimethyl maleate at higher temperature gave benzene derivatives. The low reactivity of 7 and the instability of the mono-adducts with 7 were considered from the existence of back reaction and easy elimination of methyl formate, respectively. Hydrolyses of the mono-adducts of 2-pyrones gave polyfunctionalized cyclohexenes and elimination products generated from the preferencial trans-elimination of the leaving groups.     

Self-assembled coordination cage derived from small-sized pyridinophane

The dithia[3.3]pyridinophane consisting of two pyridine rings has been found out to assume the syn-structure by the X-ray crystallography, meaning the two nitrogen atoms point in the same direction. From this cyclophane and cis-protected palladium(II), the self-assembled coordination molecular cage has been constructed.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

Study of pyrolysis kinetic of green corn husk

In this paper, it was suggested the use of green corn husk, which is a biomass from agro-industry, as an alternative source of energy through its pyrolysis. Green corn husk characterization was done through immediate and elemental analysis of its components: cellulose, hemicelluloses, and lignin. It was also measured its higher calorific value. The pyrolysis study of green corn husk was done by the isoconversion and the Master plots method. Thermogravimetric plots were obtained at heating rates of 5, 10, 15, and 20 °C min^?1. The pyrolysis kinetics parameters were studied through the Flynn–Wall–Ozawa (FWO), Kissinger, and Friedman models. The Master plots method was used to determine the pyrolysis reaction order. The results of the reaction energy activation were found to be in the range 105.21–157.46 kJ mol^?1 by the FWO method, 150.50 kJ mol^?1 by the Kissinger method, and ranged 120.66–163.81 kJ mol^?1 by the Friedman method. The Master plots method showed a three-way-transport diffusional kinetics for the biomass de-volatilization process. The higher calorific value found for green corn husk was 16.14 MJ kg^?1. The simulation showed correlation between the experimental data and the proposed model for conversion values up to 0.8.

     

Development of xanthene dyes containing arylacetylenes: The role of acetylene linker and substituents on the aryl group

Fluorescent dyes possessing a variety of arylacetylenes at the 9-position of a xanthene skeleton were synthesized and their optical properties were investigated. The π system effectively expanded over the xanthene skeleton and the aryl group through the triple bond. Starting from the emission wavelength (λ_em) of 9-methyl xanthene 20 in basic DMSO solution at 536?nm, the emission wavelengths gradually shifted to the red region for methylacetylene 17 (λ_em?=?600?nm), phenylacetylene 5 (λ_em?=?636?nm), and p-CF₃-phenylacetylene 11 (λ_em?=?660?nm). On the basis of these data, we estimated the substituent effects for the red shift on the emission wavelength and rationally explained the results by DFT calculations. Furthermore, potential applicability of these fluorescent dyes to cell staining was exemplified.     

利用高分辨率光谱和从头算理论研究9-甲基蒽的大振幅运动

本文利用平行超音速射流和光频梳技术观察到9-甲基蒽(9MA)的多普勒的高分辨率和高精度光谱. CH₃内部旋转的势能曲线用六重对称正弦函数表示. 之前报道的9MA-d12的势垒(V₆)远远低于9MA-h12[M. Baba, et al., J. Phys. Chem. A 113, 2366 (2009)]. 本文对多组分分子轨道法进行从头算方法的理论计算. 氘代取代势垒降低的部分原因是H和D原子核的波函数不同.     

Cyano-bridged Mn(III)-M(III) single-chain magnets with M(III)=Co(III), Fe(III), Mn(III), and Cr(III)

A series of isostructural cyano-bridged Mn(III)(h.s.)-M(III)(l.s.) alternating chains, [Mn(III)(5-TMAMsalen)M(III)(CN)(6)]?4H(2)O (5-TMAMsalen(2-)=N,N'-ethylenebis(5-trimethylammoniomethylsalicylideneiminate), Mn(III)(h.s.)=high-spin Mn(III), M(III)(l.s.)=low-spin Co(III), Mn-Co; Fe(III), Mn-Fe; Mn(III), Mn-Mn; Cr(III), Mn-Cr) was synthesized by assembling [Mn(III)(5-TMAMsalen)](3+) and [M(III)(CN)(6)](3-). The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [-Mn(III)-NC-M(III)-CN-] repeating motif, for which the -NC-M(III)-CN- motif is provided by the [M(III)(CN)(6)](3-) moiety adopting a trans bridging mode between [Mn(III)(5-TMAMsalen)](3+) cations. The Mn(III) and M(III) ions occupy special crystallographic positions: a C(2) axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn-Teller axis of the Mn(III)(h.s.) ion is perpendicular to the N(2)O(2) plane formed by the 5-TMAMsalen tetradentate ligand. These Jahn-Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn-N(axis) -C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter-chain M???M distance being relatively large at 9?? due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5-TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn-Fe and Mn-Mn display intra-chain ferromagnetic interactions, whereas Mn-Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single-chain magnet (SCM) behavior of these three systems, whereas Mn-Co is merely paramagnetic with S(Mn)=2 and D/k(B)=-5.3?K (D being a zero-field splitting parameter). At low temperatures, the Mn-M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite-chain and finite-chain regimes for the SCM behavior. These isostructural hetero-spin SCMs offer a unique series of alternating [-Mn-NC-M-CN-] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Convergent synthesis of the common FGHI-ring part of ciguatoxins

Convergent synthesis of the common FGHI-ring part (54) of ciguatoxins was achieved via the following key steps: (i) the Nozaki-Hiyama-Kishi reaction connecting the F-ring part (6) with the I-ring part (7); (ii) regio- and stereoselective epoxidation; (iii) the 6-exo-epoxide opening reaction forming simultaneously the H-ring and the quaternary asymmetric center at C30; (iv) inversion of the C29 stereocenter by a two-step oxidation/reduction process, where the successful inversion depended on proper management of the steric environment of the substrate; and (v) final reductive cyclization constructing the G-ring.