Microstructural properties of sintered Al–Cu–Mg–Sn alloys

A non-commercial Al4Cu0.5Mg alloy has been used for investigating the effects of the elemental Sn additions. Uniaxial die compaction response of the alloys in terms of green density was examined, and the results showed that Sn addition has no effect when compacting conducted under high pressures. In total, 93–95% green density was achieved with an applied pressure of 400 MPa. Thermal events occurring during the sintering of the emerging alloys were studied by using differential scanning calorimetry (DSC). First thermal event on the DSC analysis of the Al4Cu0.5Mg1Sn alloy is the melting of elemental Sn, whereas for Al4Cu0.5Mg alloy, it is the formation of Al–Mg liquid nearly at 450 °C. Also it is clearly seen on the DSC analysis that Sn addition led to an increase in the formation enthalpy of Al–Mg liquid phase. High Sn content and high sintering temperature (620 °C), therefore high liquid-phase content, caused decrease on the mechanical properties due to thick intergranular phases and grain coarsening. Highest transverse rupture strength and hardness values were obtained from Al4Cu0.5Mg0.1Sn alloy sintered at 600 °C and measured as 390 MPa and 73 HB, respectively.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.     

Optimization Strategy for Isocratic Separation of α-Aspartame and Its Breakdown Products by Reversed Phase Liquid Chromatography

α-Aspartame (L-α-aspartyl-L-phenylalanine methyl ester) is increasingly being used in wide variety of commonly consumed food products. This structure contains ester and peptide bonds. The ester linkage may hydrolyze to produce L-α-aspartyl-L-phenylalanine or cyclohydrolyze to produce the corresponding diketopiperazine ring. This ring can open to form L-α-aspartyl-L-phenylalanine and ultimately this compound can hydrolyze to L-phenylalanine and L-aspartic acid. The pH, buffer type, concentration, the presence of water and temperature are other important factors affecting its stability. Because α-aspartame can lose its sweetness under these conditions determination of aspartame and its breakdown products is extremely important for diet foods quality. The optimum mobile phase for the chromatographic separation was found to be acetonitrile-water (20:80, ν/ν) with 5.10^?3 M hexanesulfonic acid and a pH of 2.6.     

Quantitative analysis of sea-bed sediments from Eastern Black Sea by EDXRF spectrometry

Sea-bed sediments from Eastern Black Sea have been analyzed for their Fe, Ba and Sr contents using the methods of standard addition and energy dispersive X-ray fluorescence (EDXRF). Samples were prepared from powder sifted by a 200 mesh sieve. An annular 100 mCi²⁴¹Am radioactive source emitting 59.543 keV photons was used for excitation and a Ge(Li) detector, which has a 190 eV FWHM for 5.9 keV photons was used for intensity measurements. 2048 channels of the MCA are employed for 20 or 30 min. Dried and ground sea-bed sediments are found to contain 2.95–7.50% Fe, 0.032–0.268% Ba and about 73–273 ppm Sr. These results agree with those obtained via atomic absorption methods.     

Measurement of absolute intensity of 1001 keV gamma-ray of 234mPa

The sorption behavior of ²³⁵U fission fission products ⁹⁹Mo and ¹³²Te was studied through batch and dynamic experiments when they were dissolved in 1 to 7M HNO₃ solutions. It was found that ⁹⁹Mo is always totally adsorbed on hydrated SnO₂, while ¹³²Te is rather weakly adsorbed, therefore they can be separated from each other although ¹³²Te in the solution still remains contaminated with other radionuclides as well as ⁹⁹Mo does in the solid.     

Extraction-ability and -selectivity of tetra-aza-crown ethers for transition metal cations

In order to investigate the relative effects of the differences between the structures and lipophilicities of 1, 10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TA-18-crown-6) and the tetrabenzyl derivative of 1,10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TBTA-18-crown-6) on their extraction-abilities and -selectivities for transition metal cations, constants of the overall extraction (logK _ex) of 1:1 (M:L) complexes, the distribution (K _D) for two diluents (CH₂Cl₂ and CHCl₃) with different dielectric constants have been determined at 25 ± 0.1 °C. The magnitude of logK _ex is largely determined by that of K _D. The equilibrium constants of TA-18-crown-6 have been compared with those of TBTA-18-crown-6. It is found that:(i) logK _ex sequences of TA-18-crown-6 and TBTA-18-crown-6 for transition metals in CH₂Cl₂ lie in order: Fe³⁺ > Cu²⁺ > Mn²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ and Fe³⁺ > Cu²⁺ > Co²⁺ > Mn²⁺ > Ni²⁺ > Cd²⁺ > Zn²⁺ respectively; (ii) the stability sequences of two types of tetra-aza-crown ethers with the transition metal cations in CHCl₃ are the same as follows: Fe³⁺ > Ni²⁺ > Cu²⁺ > Co²⁺ > Zn²⁺ > Cd²⁺ > Mn²⁺, and (iii) unusual selectivities are observed for transition metal-tetra-aza-crowns, e.g. the high Fe³⁺/M ⁿ⁺ selectivity factors (S_f) of TA-18-crown-6, except for the competitive-extractions for the special case in CHCl₃ of TBTA-18-crown-6, it was found that the Mn²⁺/M ⁿ⁺ values were relatively higher according to the other transition metal cations. A systematic sequence in these two types of solvents is not found for a given transition metal cation in terms of the variation of selectivity with the tetra-aza-crown ethers. The results provide alternatives for the rational design of other specific ligands on the transition metal cations.     

Anderson localization for one- and quasi-one-dimensional systems

We prove almost-sure exponential localization of all the eigenfunctions and nondegeneracy of the spectrum for random discrete Schrödinger operators on one- and quasi-one-dimensional lattices. This paper provides a much simpler proof of these results than previous approaches and extends to a much wider class of systems; we remark in particular that the singular continuous spectrum observed in some quasiperiodic systems disappears under arbitrarily small local perturbations of the potential. Our results allow us to prove that, e.g., for strong disorder, the smallest positive Lyapunov exponent of some products of random matrices does not vanish as the size of the matrices increases to infinity.     

Investigation of directional solidified Al–Ti alloy

Al–1 wt% Ti alloy was directionally solidified upwards under argon atmosphere under the two conditions; with different temperature gradients (G = 2.20–5.82 K/mm) at a constant growth rate (V = 8.30 μm/s) and with different growth rates (V = 8.30–498.60 μm/s) at a constant temperature gradient (G = 5.82 K/mm) in a Bridgman furnace. The dependence of characteristic microstructure parameters such as primary dendrite arm spacing (λ₁), secondary dendrite arm spacing (λ₂), dendrite tip radius (R) and mushy zone depth (d) on the velocity of crystal growth and the temperature gradient were determined by using a linear regression analysis. A detailed analysis of microstructure development with models of dendritic solidification and with previous similar experimental works on dendritic growth for binary alloys were also made.     

Lower bounds on the cluster size distribution

We rigorously prove that the probabilityP _n that the origin of ad-dimensional lattice belongs to a cluster of exactlyn sites satisfiesP _n > exp(–n ^(d–1)/d ) whenever percolation occurs. This holds for the usual (noninteracting) percolation models for any concentrationp > p _c , as well as for the equilibrium states of lattice spin systems with quite general interactions. Such a lower bound applies also if no percolation occurs, but if it appears in some other phase of the system.