Computation of Rotation Matrices Making Lined‐Up to the Local Cartesian Coordinates

Rotation matrices were expressed in terms of Gaunt coefficients and complex spherical harmonics. The rotation matrices were calculated using two different ways. In the first, Gaunt coefficients and normalized complex spherical harmonics were directly calculated using binomial coefficients; in the second, Gaunt coefficients and complex spherical harmonics were recursively calculated. The methods were compared with respect to accuracy and computation time (CPU) for low and very high quantum numbers.     

Thermal decompositions of some divalent transition metal complexes of triethanolamine

The thermal behaviours of the Ti(II), Mn(II), Fe(II), Ni(II), Cu(II) and Zn(II) complexes of triethanolamine were studied by means of thermogravimetry, differential thermogravimetry, differential thermal analysis infrared spectrophotometry and elemental analysis. The sequence of thermal stability of the metal complexes, determined by using the initial decomposition temperature, was found to be Ti(II)?Mn(II)>Fe(II)>Ni(II)>Zn(II)>Cu(II). Some of the kinetic parameters, such as the activation energy and order of reaction for the initial decomposition reaction, were calculated and the relationship between the thermal stability and the chemical structure of the complexes is discussed.     

Preliminary Analyses of Radionuclides in Afşin-Elbistan Lignite Samples

This preliminary study describes the concentration of radionuclides ²³⁸U, ²³²Th, ⁴⁰K, and ²²⁶Ra in Afin-Elbistan lignite samples which are primarily used for power generation in the Afin-Elbistan Coal-Fired Power Plant. The results show that the concentration of ²³⁸U is higher in the Afin-Elbistan lignite compared to various world coals whereas the opposite is observed with ²³²Th and ⁴⁰K.     

Trace and major element compositions of Black Sea aerosol

Instrumental neutron activation analysis (INAA), flame atomic absorption spectrometry (FAAS), flame atomic emission spectrometry (FAES), graphite furnace atomic absorption spectrometry (GF-AAS), ion chromatography (IC) and visible spectrometry (VIS) were used to determine the composition of atmospheric aerosols, collected at a rural site in the Western Black Sea Coast of Turkey. A total of 354 daily aerosol samples were analyzed for 46 trace and major elements and ions. Sample preparation, quality control procedures, instrumental operating conditions for INAA and source apportionment work is presented.     

Diterpenoid Alkaloids of Delphinium buschianum Grossh.

From the aerial parts of Delphinium buschianum Grossh ., collected in Turkey, a new diterpenoid alkaloid 1 , named budelphine, was isolated along with the known diterpenoid alkaloids karakoline ( 2 ), 18‐hydroxy‐14‐O‐methylgadesine ( 3 ), delsoline ( 4 ), lapaconidine ( 5 ), columbianine ( 6 ), 14‐benzoylneoline ( 7 ), and hetisine ( 9 ). The structure of 1 was established on the basis of ¹H‐, ¹³C‐, DEPT, ¹H,¹H‐COSY, NOESY, HSQC, and HMBC NMR studies.     

Hydrothermal Synthesis of Siderite and Application as Catalyst in the Electro-Fenton Oxidation of p-Benzoquinone

A weak aspect of the electro-Fenton (EF) oxidation of contaminants is the dependence of the Fenton reaction on acidic pH values. Therefore, the rationale of this work was to develop a novel catalyst capable of promoting the EF oxidation process at near-neutral and basic pH values. In this framework, rhombohedral FeCO₃ was synthesized hydrothermally and used as a catalyst in the EF oxidation of p-benzoquinone (BQ). The catalyst was characterized using various surface and spectroscopic methods. Moreover, the effects of applied current (100–500 mA), time (1–9 h), catalyst dosage (0.25–1.00 g L⁻¹), and initial concentration of BQ (0.50–1.00 mM) on the total organic carbon removal efficiency were determined. The results indicated that a 400 mA current was sufficient for a 95% total organic carbon removal and that the increase in catalyst dosage had a positive effect on the mineralization of BQ. It was determined that at pH 3, FeCO₃ behaved like a homogeneous catalyst by releasing Fe³⁺ ions; whereas, at the pH range of 5–7, it shifted to a homogeneous/heterogeneous catalyst. At pH 9, it worked solely as a heterogeneous catalyst due to the decrease of Fe ions passing into the solution. Finally, the spent catalyst did not undergo structural deformations after the EF treatment at higher pH values and could be regenerated and used several times     

Energy,exergy and economic (3E) evaluation of the photovoltaic/thermal collector-assisted heat pump domestic water heating system for different climatic regions in Turkey

Journal of Thermal Analysis and Calorimetry - In this study, the energy, exergy and economic (3E) analyses were performed for the photovoltaic/thermal collector-assisted heat pump domestic water...     

Electro-Oxidative Selective Esterification of Methylarenes and Benzaldehydes

A mild and green electro-oxidative protocol to construct aromatic esters from methylarenes and alcohols is herein reported. Importantly, the reaction is free of metals, chemical oxidants, bases, acids, and operates at room temperature. Moreover, the design of the electrolyte was found critical for the oxidation state and structure of the coupling products, a rarely documented effect. This electro-oxidative coupling process also displays exceptional tolerance of many fragile easily oxidized functional groups such as hydroxy, aldehyde, olefin, alkyne, as well as neighboring benzylic positions. The enantiomeric enrichment of some chiral alcohols is moreover preserved during this electro-oxidative coupling reaction, making it overall a promising synthetic tool.     

FIBSIMS: A review of secondary ion mass spectrometry for analytical dual beam focussed ion beam instruments

Secondary ion mass spectrometry (SIMS) is a well-known technique for 3D chemical mapping at the nanoscale, with detection sensitivity in the range of ppm or even ppb. Energy dispersive X-ray spectroscopy (EDS) is the standard chemical analysis and imaging technique in modern scanning electron microscopes (SEM), and related dual-beam focussed ion beam (FIBSEM) instruments. Contrary to the use of an electron beam, in the past the ion beam in FIBSEMs has predominantly been used for local milling or deposition of material. Here, we review the emerging FIBSIMS technique which exploits the focused ion beam as an analytical probe, providing the capability to perform secondary ion mass spectrometry measurements on FIBSEM instruments: secondary ions, sputtered by the FIB, are collected and selected according to their mass by a mass spectrometer. In this way a complete 3D chemical analysis with high lateral resolution <?50 nm and a depth resolution <?10 nm is attainable.We first report on the historical developments of both SIMS and FIB techniques and review recent developments in both instruments. We then review the physics of interaction for incident particles using Monte Carlo simulations. Next, the components of modern FIBSIMS instruments, from the primary ion generation in the liquid metal source in the FIB column, the focussing optics, the sputtered ion extraction optics, to the different mass spectrometer types are all detailed. The advantages and disadvantages of parallel and serial mass selection in terms of data acquisition and interpretation are highlighted, while the effects of pressure in the FIBSEM, acceleration voltage, ion take-off angles and charge compensation techniques on the analysis results are then discussed. The capabilities of FIBSIMS in terms of sensitivity, lateral and depth resolution and mass resolution are reviewed. Different data acquisition strategies related to dwell time, binning and beam control strategies as well as roughness and edge effects are discussed. Data analysis routines for mass identification based on isotope ratios and molecular fragments are outlined. Application examples are then presented for the fields of thin films, polycrystalline metals, batteries, cultural heritage materials, isotope labelling, and geological materials. Finally, FIBSIMS is compared to EDS, and the potential of the technique for correlative microscopy with other FIBSEM based imaging techniques is discussed.