Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Synthesis and dispersion of Ni(OH)2 platelet-like nanoparticles in water

Synthesis of nanometric platelet-like Ni(OH)2 particles is described. The role of several experimental parameters on the particle size is investigated. A colloidal dispersion of particles is produced by adsorbing ionizable organic ligands (trisodium citrate) on the particle surface. The stability of this colloidal dispersion and the particle charge density are determined for different citrate ions concentrations.     

Inclusion complexes of trivalent lutetium cations with an acidic derivative of per(3,6-anhydro)-alpha-cyclodextrin

The cyclodextrin derivative (hexakis (2-O-carboxymethyl-3,6-anhydro)-alpha-cyclodextrin) forms mono- and bimetallic complexes with lutetium(III) in aqueous solution; the X-ray structure of the binuclear complex [Lu2(ACX)(H2O)2] is the first example of a lanthanide-cyclodextrin inclusion complex.     

Flow injection analysis : Part II. Ultrafast determination of phosphorus in plant material by continuous flow spectrophotometry

The effect of sample volume, tube length, tube diameter, peak height and sampling rate on the determination of phosphorus in acidic plant digests was investigated, and optimal conditions for the flow injection method are described. Sampling rates of 420 samples per hour were achieved without incurring problems from carryover of samples, and evidence was obtained that rates as high as 700 samples per hour are possible. The flow injection method was proved to be suitable for routine analyses and has obvious advantages over other automated or manual methods in sampling rate, simplicity of design and cost.     

Novel Access to Furan-3-thiols and Derivatives,Impact Meat-Flavor Compounds

A versatile process for the preparation of a number of 3-thio-substituted furans 1–4 is described. These products have very low odor thresholds and are thus potent flavor compounds. Fur-3-yl thiocyanates 10a , b as well as other S-containing analogues ( 2b , 7a , b , and 8 ) were prepared by a Michael-type addition of thiocyanic acid, thioacetic acid, alakanethiols, and sodium thiosulfate to alkynones 6 or 15 , followed by cyclization (Schemes 3 and 4). The thiocyanates 10a, b were converted to mixed disulfides 3 , symmetric disulfides 4 , thioethers 2 , and thiols 1 , using ‘hard’ or ‘soft’ nucleophiles or reducing agents, respectively (Scheme 6).     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Kinetics of the dehydration of CsNd(SO4)2 4 H2O

The kinetics of the dehydration of CsNd(SO₄)₂ · 4 H₂O to CsNd(SO₄)₂ · H₂O and then to CsNd(SO₄)₂ are studied by isothermal weight change. The reactions are phase-boundary-controlled. Reaction mechanism and activation energy depend on sample weight.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

A new strategy for the synthesis of optically active benzylic fluorides and corresponding five-membered heteroaromatic analogues

Benzylic fluorides, as well as five-membered heterocycles, have been obtained in high ee’s through cycloaddition reactions starting from easily accessible optically active propargylic fluorides.