Electrochemical Oxidation of Ibuprofen and Its Voltammetric Determination at a Boron‐Doped Diamond Electrode

The electrochemical oxidation of ibuprofen at a boron‐doped diamond electrode (BDDE) and its voltammetric determination is reported for the first time. A well‐defined oxidation peak was observed at around 1.6 V in 0.1 mol L^?1 H₂SO₄ solution with 10 % (v/v) ethanol at the BDDE surface activated by either cathodic or anodic pretreatments. A differential‐pulse voltammetric method for the determination of ibuprofen in pharmaceutical formulations was optimized with a detection limit of 5 µmol L^?1 and compared with the British Pharmacopeia method.     

Speciation of gadolinium in surface water samples and plants by hydrophilic interaction chromatography hyphenated with inductively coupled plasma mass spectrometry

Hydrophilic interaction chromatography (HILIC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) was optimized for speciation analysis of gadolinium-based contrast agents in environmental samples, in particular surface river waters and plants. Surface water samples from the Teltow channel, near Berlin, were investigated over a distance of 5 km downstream from the influx of a wastewater treatment plant. The total concentration of gadolinium increased significantly from 50 to 990 ng?L^?1 due to the influx of the contrast agents. After complete mixing with the river water, the concentration remained constant over a distance of at least 4 km. Two main substances [Dotarem® (Gd-DOTA) and Gadovist® (Gd-BT-DO3A)] have been identified in the river water using standards. A gadolinium-based contrast agent, possibly Gd-DOTA (Dotarem®), was also detected in water plant samples taken from the Teltow channel. Therefore, uptake of contrast agents [Gadovist® (Gd-BTDO3A), Magnevist® (Gd-DTPA), Omniscan® (Gd-DTPA-BMA), Dotarem® (Gd-DOTA), and Multihance® (Gd-BOPTA)] by plants was investigated in a model experiment using Lepidium sativum (cress plants). HILIC–ICP-MS was used for identification of different contrast agents, and a first approach for quantification using aqueous standard solutions was tested. For speciation analysis, all investigated contrast agents could be extracted from the plant tissues with a recovery of about 54 % for Multihance® (Gd-BOPTA) up to 106 % for Gadovist® (Gd-BT-DO3A). These experiments demonstrate that all contrast agents investigated are transported from the roots to the leaves where the highest content was measured.     

Synthesis and Structure of Ionic Liquids Containing the ­[Al(OC6H4CN)4]– Anion

The synthesis, structure, and physical properties of ionic liquids (IL) bearing the novel [Al(O–C₆H₄–CN)₄]^– ion as counterion to the commonly used [NR₄]⁺, [PR₄]⁺ and imidazolium ions are reported. Both the influence of the alkyl chain length as well as the functionalization with cyano groups is studied. These ILs are easily obtained by reaction of Ag[Al(O–C₆H₄–CN)₄] with the corresponding ammonium, phosphonium, and imidazolium halides. The stability towards electrophilic cations was investigated. All prepared salts have a window for the liquid phase of ca. 200 °C and are thermally stable up to 450 °C. The solid‐state structures reveal only weak cation ··· anion and anion ··· anion interactions in accord with the observed low melting points (glass transition points).     

Protein-Polysaccharide Interactions for Stabilization of Food Emulsions

Proteins, polysaccharides and their blends, as examples of natural biopolymers, are surface active materials. Biopolymers may be considered as amphiphilic macromolecules that play an essential role in stabilizing food formulations (foams, emulsions and dispersions). Under specific conditions (such as protein-to-polysaccharide ratio, pH, ionic strength, temperature, mixing processing), it has been stated that proteins and polysaccharides form hybrids (complexes) with enhanced functional properties in comparison to the proteins and polysaccharides alone. Different protein-polysaccharide pairs are reviewed with particular attention to the emulsification capability of their mixtures. In the case of uncomplexed blends of biopolymers, competitive adsorption onto hydrophobic surfaces is generally reported. Conversely, electrostatic complexation between oppositely charged proteins and polysaccharides allows better anchoring of the new-formed macro-molecular amphiphile onto oil-water interfaces. Moreover, improved thermal stability and increased resistance to external treatment (high pressure) involved in food processing are obtained. This review presents basic and applied knowledge on protein-polysaccharide interactions in aqueous medium and at the oil-water interface in food emulsion systems. Electrostatic interactions and thermodynamic incompatibility in mixed biopolymer solutions are correlated to the functional properties (rheology, surface hydrophobiciry, emulsification power) of these interesting blends. Basic and industrial selected systems of different families of hydrocolloids (as gum Arabic, galactomannans, pectins) and protein (caseins, whey, soya, gelatin) mixtures are reviewed.     

Ionization by pH and Anionic Surfactant Binding Gives the Same Thickening Effects of Crosslinked Polyacrylic Acid Derivatives

Physical properties of aqueous solutions of hydrophobically modified crosslinked polyacrylic acids change quite extensively as the polymer is charged up. A study is carried out concerning the similarities between two polymer ionization processes, that is, by pH increment and anionic surfactant addition. The two processes charge the polymer by distinctly different mechanisms. At sufficiently high pH the carboxylic groups of the polymer are virtually all ionized and the polymer is, therefore, fully charged. The effective repulsion among the charged groups due to the entropy of the counterions promotes an increased stiffness as well as an expansion of the polymer particles. We investigate here how the ionization and swelling will be if, instead of high pH, the polymer is at low pH conditions but associated to ionic surfactants. Surfactants associate to the polymer both in a noncooperative way by the binding of individual surfactant molecules and in a cooperative way as micelles since the polymer promotes surfactant self-assembly. This binding leads to a highly charged polymer-surfactant complex and leads to an osmotic swelling as well. The swelling and the gelation were monitored by rheology and dynamic light scattering, of polymer solutions by varying the pHs and adding ionic surfactants at low pH. The results show that ionization by surfactants and by pH lead to approximately the same gelation degree, as can be seen by similar viscosity values. Both processes result in dramatic viscosity increases, up to 8 orders of magnitude. More hydrophobic surfactants, with longer alkyl chain, are shown to be more efficient as enhancers of swelling and gelation. The network that is formed at high pH or at sufficiently high concentration of surfactant can be weakened or even disrupted if monovalent or divalent salts are added, demonstrating the role of counterion entropy.     

Determination of the total purity of a high-purity silver material to be used as a primary standard for element determination

A candidate material for the use as primary standard for silver determination was characterized with respect to total purity. Except the radioactive elements and He, all possible impurities were considered. Based on glow discharge mass spectrometry, inductively coupled plasma-mass spectrometry and carrier gas hot extraction measurements, the demonstrated total purity and its standard uncertainty is w(Ag) = (99.999 52 ± 0.000 11) %. The purity value and its uncertainty is dominated by the contributions from the measurements of the nonmetallic impurities, namely S, N, C and O.     

A new rotating-disk sorptive extraction mode,with a copolymer of divinylbenzene and N-vinylpyrrolidone trapped in the cavity of the disk,used for determination of florfenicol residues in porcine plasma

A novel extraction approach was developed based on rotating-disk sorptive extraction (RDSE). In this approach the rotating-disk extraction device consists of a Teflon disk, with a cavity that is loaded with a commercial sorbent phase selected according to the polarity of the analyte. To avoid leakage of the sorbent, the cavity is covered with a fiberglass filter and sealed with a Teflon ring. The proposed novel analytical RDSE technique was used in this study to determine florfenicol levels in plasma as a model analyte, or sample system, to describe the pharmacokinetics of a veterinary formulation. The sorbent used for this application was the copolymer of divinylbenzene and N-vinylpyrrolidone (Oasis HLB), which was selected because the florfenicol molecule contains both hydrophilic and lipophilic moieties. After the extraction, final determination of the analyte was performed by HPLC–DAD. Calibration plots and other analytical features were obtained after 90 min of extraction. The calibration plot was linear over the interval 0.4–16 μg mL^?1 (n?=?6), with R ²?=?0.9999. Recovery and repeatability were determined using a blank plasma sample spiked with 4.8 μg mL^?1 florfenicol. A recovery of 91.5 %, with a relative standard deviation (RSD) of 8.8 %, was obtained when the extraction was evaluated using six different rotating-disk devices. Precision was also assessed, using the same disk (containing the same sorbent phase) for eight aliquots of the same sample. The RSD under these conditions was 10.2 %, clearly indicating that the sorptive phase could possibly be re-used. Accordingly, RDSE is a suitable sample preparation alternative to liquid–liquid extraction (LLE), solid-phase extraction (SPE), and stir-bar sorptive extraction (SBSE).