Development of a tandem time‐of‐flight mass spectrometer with an electrospray ionization ion source

A new tandem time‐of‐flight mass spectrometer with an electrospray ionization ion source ‘ESI‐TOF/quadTOF’ was designed and constructed to achieve the desired aim of structural elucidation via high‐energy collision‐induced dissociation (CID), and the simultaneous detection of all fragment ions. The instrument consists of an orthogonal acceleration‐type ESI ion source, a linear TOF mass spectrometer, a collision cell, a quadratic‐field ion mirror and a microchannel plate detector. High‐energy CID spectra of doubly protonated angiotensin II and bradykinin were obtained. Several fragment ions such as a‐, d‐, v‐ and w‐type ions, characteristic of high‐energy CID, were clearly observed in these spectra. These high‐energy CID fragment ions enabled confirmation of the complete sequence, including leucine–isoleucine determinations. It was demonstrated that high‐energy CID of multiply protonated peptides could be achieved in the ESI‐TOF/quadTOF. Copyright © 2010 John Wiley & Sons, Ltd.     

Densification of Sol-Gel Thin Films by Ultraviolet and Vacuum Ultraviolet Irradiations

Structural changes in SiO₂ and TiO₂ gel films were investigated using ultraviolet (UV) and vacuum ultraviolet (VUV) irradiations. A significant compaction with dehydration of SiO₂ gel films was induced by irradiation of photons in the range of 9–18 eV. The refractive index and the shrinkage of the irradiated SiO₂ gel films were comparable to those obtained by sintering at 1000°C. Densification of TiO₂ gel films was also observed with irradiation of 5–14 eV photons. However, effects of the irradiation on TiO₂ gel were smaller that those on SiO₂ gel. The structural changes in the gel films are attributed to electronic excitations which are induced by irradiation with photons having higher energies than the bandgap of the oxides. The photo-induced effects are presumed to depend on the optical properties and structure of the gels.     

Thermal characteristics of poly (DL-lactic acid) microspheres containing neurotensin analogue.

The thermal characteristics of poly (DL-lactic acid) (DL-PLA) microspheres containing a hexapeptide (NA: H(CH3)-Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt) with neurotensin activity were investigated. PLA microspheres with a drug content of 1.5-11.0% were prepared by a novel o/w (oil-in-water) solvent evaporation method. Both DL-PLA and NA were amorphous in form, and an increase in heat capacity at glass transition temperature (Tg) of the polymer was observed in DL-PLA microspheres containing NA. The Tg of DL-PLA (PLA2000 bulk) was 307.8 K, while Tg of microspheres containing NA (content 6.0%) shifted to 321.2 K. The Tg of PLA2000 microspheres was found to increase with an increase in the content of NA, and its increasing tendency reached a plateau at an NA content of greater than 6%. The apparent activation energy of glass transition of PLA2000 bulk and the microspheres was calculated to be 86.3 and 99.3 kcal/mol, respectively. As a result of the release test after storage at 4 degrees C and 40 degrees C for 1 month, nearly the same release profiles of NA from PLA2000 microspheres were found. The release rate of NA after the initial release became slow after storage at 45 degrees C for 1 month. This may be attributed mainly to a decrease in surface area caused by the formation of agglomerates of PLA2000 microspheres under conditions near Tg.     

Chemical changes of polymeric surfaces after modification with multi-source cluster deposition

A new process for surface modification of polymers with multi-source cluster deposition apparatus has been reported in our previous work. The apparatus simultaneously supplies reactant of ammonium sulfamate and activator of energetic Ar(+) ion. In this work chemical changes are analyzed on the basis of XPS spectra and the relations of contact angle and platelet adhesion with chemical changes are discussed. Polymer film, setting on a turning holder, was irradiated by Ar(+) ions during bombardment with ammonium sulfamate clusters. The Ar(+) ion source served for activation of polymer surface and a cluster ion source supplied ammonium sulfamate molecules to react with activated surface. After thorough washing with deionized sterile water, the modified surfaces were evaluated in terms of contact angle of water, elemental composition and binding state on XPS and platelet adhesion with platelet rich plasma (PRP). The modification of polysulfone decreased the contact angle of water on surfaces from 82.6 down to 34.5 degrees. The adhesion number of platelets were decreased to one-tenth of the original surface. Ammonium, amine, sulfate and thiophene combinations were formed on the modified surfaces. The primary studies showed successful modification of polysulfone with ammonium sulfamate by assistance of Ar(+) ion irradiation. The polar groups like N-sulfate were formed on surfaces and contribute to the decrease of surface contact angle and adhesion number of platelets. Since the same process can also be applied to other polymeric materials with various substrates, combining with the features of no solvent and no topographic changes, this method might be developed in a promising way for modification of polymers.