Magnetic order in RCr\mathsf{_{2}}Si\mathsf{_{2}} intermetallics

The magnetic structure and ordering temperatures of three intermetallic compounds which crystallize in the tetragonal ThCr₂Si₂ structure, TbCr₂Si₂, HoCr₂Si₂ and ErCr₂Si₂, have been determined by neutron diffraction, differential scanning calorimetry and magnetization measurements. The Cr-sublattice orders anti-ferromagnetically with Néel temperatures of 758 K for TbCr₂Si₂, 718 K for HoCr₂Si₂ and 692 K for ErCr₂Si₂. Chromium atoms located at 4d crystallographic sites are aligned anti-parallel along the c-axis, with G_ZCr magnetic modes. In contrast with metallic bcc Cr, the refined room temperature value of the ordered Cr moment is anomalously large for all three compounds. No long range magnetic order of the R sublattice in TbCr₂Si₂ and HoCr₂Si₂ is observed, whilst the Er sublattice in ErCr₂Si₂ orders independently of the Cr sublattice below 2.4 K with moments ferromagnetically aligned in the basal plane.Received: 4 November 2003, Published online: 30 January 2004PACS: 75.25. + z Spin arrangements in magnetically ordered materials (including neutron and spin-polarized electron studies, synchrotron-source X-ray scattering, etc.) - 75.30.Cr Saturation moments and magnetic susceptibilities - 75.50.Ee Antiferromagnetics     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

Electrical characterization of low temperature deposited TiO2 films on strained-SiGe layers

Thin films of titanium dioxide have been deposited on strained Si_0.82Ge_0.18 epitaxial layers using titanium tetrakis-isopropoxide [TTIP, Ti(O-i-C₃H₇)₄] and oxygen by microwave plasma enhanced chemical vapor deposition (PECVD). The films have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Dielectric constant, equivalent oxide thickness (EOT), interface state density (D_it), fixed oxide charge density (Q_f/q) and flat-band voltage (V_FB) of as-deposited films were found to be 13.2, 40.6 Å, 6×10¹¹ eV⁻¹ cm⁻², 3.1×10¹¹ cm⁻² and −1.4 V, respectively. The capacitance–voltage (C–V), current–voltage (I–V) characteristics and charge trapping behavior of the films under constant current stressing exhibit an excellent interface quality and high dielectric reliability making the films suitable for microelectronic applications.     

Fullerene C6 0 Aggregates in Polymethyl Methacrylate Films

The structure of aggregates of fullerene C_{6 0} introduced into films of radical polymethyl methacrylate in the stage of solution preparation was studied by wide-angle X-ray diffraction.     

Preconcentration and recovery of uranium and thorium from Indian monazite sand by using a modified fly ash bed

Adsorption of uranium, as UO₂ ²⁺, and thorium, as Th⁴⁺, has been studied using a modified fly ash bed. Effects of pH and various ions like La³⁺, Fe³⁺, Ce⁴⁺, SiO₃ ^2- etc., have been examined. Synthetic mixtures of UO₂ ²⁺ and Th⁴⁺ in different concentrations were passed through the bed and eluted separately with various selective reagents viz. ammonium carbonate, sodium carbonate and acetic acid-sodium hydroxide buffer. Separations of these elements at ppm level are shown to be very effective. The separation of uranium and thorium in the presence of lanthanides in monazite sand has been studied successfully. In the analysis of monazite sand, the oxalate precipitation has been avoided. The method is simple and of very low cost. The modified fly ash bed can also be used to remove uranium from contaminated water.     

An Experimental Investigation into the Acoustic Characteristics of Fluid-filled Porous Structures—A Simplified Model of the Human Skull Cancellous Structure

In nature, shape and structure evolve from the struggle for better performance. Often, biological structures combine multiple beneficial properties, making research into mimicking them very complex. Presented here is a summary of observations from a series of experiments performed on a material that closely resembles the human skull bone’s cancellous structure under acoustic loads. Transmission loss through flat and curved open-cell polyurethane foam samples is observed using air and water as the two interstitial fluids. Reduction in strength and stiffness caused by porosity can be recovered partially by filling the interstitial pores with a fluid. The test findings demonstrate the influence of the interstitial fluid on the mechanical characteristics of a porous structure in a quantitative manner. It is also demonstrated that the transmission loss does not depend only on the mass per unit area of the structure as predicted by acoustic mass law. Current tests also demonstrate that the transmission loss is more sensitive to the interstitial fluid than the shape and support conditions of the structures. Test observations thus support the concepts of “moisture-sensitivity of biological design” and the “law of hierarchy in natural design”.     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.