Gas chromatographic — Mass spectrometric identification of alkylcyclohexanes and cyclohexenes

Summary A series of 34 alkylcyclohexane hydrocarbons structurally related top-menthane, including all saturated, monoolefinic and aromatic structural precursors from cyclohexane, have been characterized by GC and MS. Kováts retention indices have been determined on five stationary phases (squalane, SE-30, Apiezon L, OV-225, PEG 20M) and the corresponding polarity, temperature and structural increments have been calculated. From the information acquired 10 alicyclic hydrocarbons have been identified for the first time in a pyrolysis naphtha.     

Chlorination of tetrahydrofuran-2-carboxylic acid esters

The photochemical chlorinatlon of tetrahydrofuran-2-carboxylic acid esters with chlorine at –15 to –20C leads primarily to the formation of 5-chlorotetrahydrofuran-2-carboxylic acid esters (70–80%). 4,5-Dihydrofuran-2-carboxylic acid and furan-2- carboxylic acid esters are formed as side products. The structures of the principal and side products were investigated by PMR and mass spectroscopy.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 166–168, February, 1979.     

On the statistical control of 'loss-free counting' and 'zero dead time' spectrometry

The assessment of the statistical counting uncertainty is discussed for two pulse loss correction methods in nuclear spectrometry: the 'loss-free counting' technique based on the virtual pulse generator method and the 'zero dead time' technique with 'variance spectrum'.     

Covalent crosslinking of 1-D photonic crystals of microporous Si by hydrosilylation and ring-opening metathesis polymerization

Free-standing porous Si multilayer dielectric mirrors, prepared by electrochemical etching of crystalline Si, are treated with a ruthenium ring-opening metathesis polymerization (ROMP) catalyst followed by norbornene to produce flexible, stable composite materials in which poly(norbornene) is covalently attached to the porous Si matrix.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

997.

Thermal characterization of UHMWPE stabilized with natural antioxidants     

M. Peltzer  J. R. Wagner  A. Jiménez 《Journal of Thermal Analysis and Calorimetry》2007,89(2):493-497

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

998.

Reductive PET cycloreversion of oxetanes: singlet multiplicity, regioselectivity, and detection of olefin radical anion     

Pérez-Ruiz R  Izquierdo MA  Miranda MA 《The Journal of organic chemistry》2003,68(26):10103-10108

Cycloreversion of 2-(p-cyanophenyl)-4-methyl-3-phenyloxetane (1) is achieved using 1-methoxynaphthalene (2) as electron-transfer photosensitizer. The experimental results are consistent with the reaction taking place from the singlet excited state of the sensitizer. Ring splitting of the radical anion 1*- occurs with cleavage of O-C2 and C3-C4 bonds, leading to products (acetaldehyde and p-cyanostilbene) different from the reagents used in the Paterno-Büchi synthesis of 1. The olefin radical anion involved in the electron-transfer process has been detected by means of laser flash photolysis.     

999.

Antiferromagnetic three-dimensional order induced by carboxylate bridges in a two-dimensional network of [Cu3(dcp)2(H2O)4] trimers     

King P  Clérac R  Anson CE  Coulon C  Powell AK 《Inorganic chemistry》2003,42(11):3492-3500

A new Cu(II) complex, [Cu(3)(dcp)(2)(H(2)O)(4)](n), with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H(3)dcp) has been prepared by hydrothermal synthesis, and it crystallizes in the monoclinic space group P2(1)/c with a = 11.633(2) A, b = 9.6005(14) A, c = 6.9230(17) A, beta = 106.01(2) degrees, and Z = 2. In the solid state structure of [Cu(3)(dcp)(2)(H(2)O)(4)](n), trinuclear [Cu(3)(dcp)(2)(H(2)O)(4)] repeating units in which two dcp(3-) ligands chelate the three Cu(II) ions with the central Cu(II) ion, Cu(1) (on an inversion center), link to form infinite 2D sheets via syn-anti equatorial-equatorial carboxylate bridges between Cu(2) atoms in adjacent trimers. These layers are further linked by syn-anti axial-equatorial carboxylate bridging between Cu(1) atoms in adjacent sheets resulting in the formation of a crystallographic 3D network. A detailed analysis of the magnetic properties of [Cu(3)(dcp)(2)(H(2)O)(4)](n) reveals that the dcp(3-) ligand acts to link Cu(II) centers in three different ways with coupling constants orders of magnitude apart in value. In the high temperature region above 50 K, the dominant interaction is strongly antiferromagnetic (J/k(B) = -32 K) within the trimer units mediated by the pyrazolate bridges. Below 20 K, the trimer motif can be modeled as an S = 1/2 unit. These units are coupled to their neighbors by a ferromagnetic interaction mediated by the syn-anti equatorial-equatorial carboxylate bridge. This interaction has been estimated at J(2D)/k(B) = +2.8 K on the basis of a 2D square lattice Heisenberg model. Finally, below 3.2 K a weak antiferromagnetic coupling (J(3D)/k(B) = -0.1 K) which is mediated by the syn-anti axial-equatorial carboxylate bridges between the 2D layers becomes relevant to describe the magnetic (T, H) phase diagram of this material.     

1000.

Hydrogen bonds of RNA are stronger than those of DNA, but NMR monitors only presence of methyl substituent in uracil/thymine     

Swart M  Fonseca Guerra C  Bickelhaupt FM 《Journal of the American Chemical Society》2004,126(51):16718-16719

Recently, Vakonakis and LiWang (J. Am. Chem. Soc. 2004, 126, 5688) reported experimental evidence for stronger hydrogen bonds in RNA A:U than in DNA A:T base pairs, which was based on differences in NMR shielding for adenine C2. We have analyzed the proposed correlation between NMR shielding and hydrogen-bond strength using density functional theory. Although we agree with the conclusion that A:U is more strongly bound, we find no correlation between the hydrogen-bond strength and the NMR shielding of C2. Our study shows that NMR merely probes the presence/absence of the methyl group in thymine/uracil, without any relation to the strength of the hydrogen bonds involved. In other words, one cannot infer the Watson-Crick hydrogen-bond strength from the NMR shielding constant of adenine C2.     

[首页] « 上一页 [95] [96] [97] [98] [99] 100 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Thermal characterization of UHMWPE stabilized with natural antioxidants

This work presents a study of the thermal degradation of ultra-high molecular mass polyethylene (UHMWPE) stabilized with natural (α-tocopherol and carvacrol) and synthetic antioxidants. Thermogravimetric analysis in dynamic mode was used to determine the apparent activation energies of different samples. The stabilization of UHMWPE with low concentrations (around 0.3%) of α-tocopherol is enough to obtain an efficient thermal performance of the polymer. Carvacrol is also a good stabilizer for UHMWPE, but at higher concentration than in the case of α-tocopherol. The comparison of apparent activation energy between samples with natural and synthetic antioxidants in similar concentration shows that α-tocopherol is a better stabilizer in terms of their thermal performance.     

Reductive PET cycloreversion of oxetanes: singlet multiplicity, regioselectivity, and detection of olefin radical anion

Cycloreversion of 2-(p-cyanophenyl)-4-methyl-3-phenyloxetane (1) is achieved using 1-methoxynaphthalene (2) as electron-transfer photosensitizer. The experimental results are consistent with the reaction taking place from the singlet excited state of the sensitizer. Ring splitting of the radical anion 1*- occurs with cleavage of O-C2 and C3-C4 bonds, leading to products (acetaldehyde and p-cyanostilbene) different from the reagents used in the Paterno-Büchi synthesis of 1. The olefin radical anion involved in the electron-transfer process has been detected by means of laser flash photolysis.     

Antiferromagnetic three-dimensional order induced by carboxylate bridges in a two-dimensional network of [Cu3(dcp)2(H2O)4] trimers

A new Cu(II) complex, [Cu(3)(dcp)(2)(H(2)O)(4)](n), with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H(3)dcp) has been prepared by hydrothermal synthesis, and it crystallizes in the monoclinic space group P2(1)/c with a = 11.633(2) A, b = 9.6005(14) A, c = 6.9230(17) A, beta = 106.01(2) degrees, and Z = 2. In the solid state structure of [Cu(3)(dcp)(2)(H(2)O)(4)](n), trinuclear [Cu(3)(dcp)(2)(H(2)O)(4)] repeating units in which two dcp(3-) ligands chelate the three Cu(II) ions with the central Cu(II) ion, Cu(1) (on an inversion center), link to form infinite 2D sheets via syn-anti equatorial-equatorial carboxylate bridges between Cu(2) atoms in adjacent trimers. These layers are further linked by syn-anti axial-equatorial carboxylate bridging between Cu(1) atoms in adjacent sheets resulting in the formation of a crystallographic 3D network. A detailed analysis of the magnetic properties of [Cu(3)(dcp)(2)(H(2)O)(4)](n) reveals that the dcp(3-) ligand acts to link Cu(II) centers in three different ways with coupling constants orders of magnitude apart in value. In the high temperature region above 50 K, the dominant interaction is strongly antiferromagnetic (J/k(B) = -32 K) within the trimer units mediated by the pyrazolate bridges. Below 20 K, the trimer motif can be modeled as an S = 1/2 unit. These units are coupled to their neighbors by a ferromagnetic interaction mediated by the syn-anti equatorial-equatorial carboxylate bridge. This interaction has been estimated at J(2D)/k(B) = +2.8 K on the basis of a 2D square lattice Heisenberg model. Finally, below 3.2 K a weak antiferromagnetic coupling (J(3D)/k(B) = -0.1 K) which is mediated by the syn-anti axial-equatorial carboxylate bridges between the 2D layers becomes relevant to describe the magnetic (T, H) phase diagram of this material.     

Hydrogen bonds of RNA are stronger than those of DNA, but NMR monitors only presence of methyl substituent in uracil/thymine

Recently, Vakonakis and LiWang (J. Am. Chem. Soc. 2004, 126, 5688) reported experimental evidence for stronger hydrogen bonds in RNA A:U than in DNA A:T base pairs, which was based on differences in NMR shielding for adenine C2. We have analyzed the proposed correlation between NMR shielding and hydrogen-bond strength using density functional theory. Although we agree with the conclusion that A:U is more strongly bound, we find no correlation between the hydrogen-bond strength and the NMR shielding of C2. Our study shows that NMR merely probes the presence/absence of the methyl group in thymine/uracil, without any relation to the strength of the hydrogen bonds involved. In other words, one cannot infer the Watson-Crick hydrogen-bond strength from the NMR shielding constant of adenine C2.