Isotopically selective infrared multiphoton dissociation of 2,3-dihydropyran

Oxygen isotopic selectivity on infrared multiphoton dissociation of 2,3-dihydropyran has been studied by the examination of the effects of excitation frequency, laser fluence, and gas pressure on the dissociation probability of 2,3-dihydropyran and isotopic composition of products. Oxygen-18 was enriched in a dissociation product: 2-propenal. The enrichment factor of 18O and the dissociation probability were measured at a laser frequency between 1033.5 and 1057.3 cm-1, the laser fluence of 2.2-2.3 J/cm2, and the 2,3-dihydropyran pressure of 0.27 kPa. The dissociation probability decreases as the laser frequency being detuned from the absorption peak of 2,3-dihydropyran around 1081 cm-1. On the other hand, the enrichment factor increases with detuning the frequency. The enrichment factor of 18O increases with increasing the 2,3-dihydropyran pressure at the laser fluence of 2.7 J/cm2 or less and the laser frequency of 1033.5 cm-1, whereas the yield of 2-propenal decreases with increasing the pressure. A very high enrichment factor of 751 was obtained by the irradiation of 0.53 kPa of 2,3-dihydropyran at 2.1 J/cm2. Collisional effect of vibrationally excited molecules with ambient molecules on isotopic selectivity is discussed on the basis of a rate equation model including a collisional vibrational de-excitation process.     

Stern-gerlach study of multidecker lanthanide-cyclooctatetraene sandwich clusters

Multilayer lanthanide-cyclooctatetraene organometallic clusters, Lnn(C8H8)m (Ln = Eu, Tb, Ho, Tm; n = 1-7; m = n - 1, n, n + 1) were produced by a laser vaporization synthesis method. The magnetic deflections of these organometallic sandwich clusters were measured by a molecular beam magnetic deflection technique. Most of the sandwich species displayed one-sided deflection, while some of smaller Ln-C8H8 clusters showed symmetric broadening without or with only very small (or absent) net high-field deflection. In general, the total magnetic moments, calculated from the magnitude of the beams deflections, increase with the number of lanthanide atoms (i.e., with increasing sandwich layers); however for Tb-, Ho-, and Tm-C8H8 clusters with n > 3, the suppression of the magnetic moments was observed, possibly through antiferromagnetic interactions. For Eu-C8H8 clusters, we observe a linear increase of the magnetic moments with the number of Eu atoms up to n = 7, with average magnetic moment per Eu atom around 7 muB--similar to that displayed by conventionally synthesized mononuclear EuIIC8H8 complexes, indicating that Eu atoms exist as Eu2+ ions in the full sandwich Eun(C8H8)n+1 clusters. These results suggest that Eun(C8H8)n+1 is a promising candidate for a high-spin, one-dimensional building block in organometallic magnetic materials.     

A Coformer Approach for Supramolecular Polymerization at High Concentrations

Insolubility of functional molecules caused by polymorphism sometimes poses limitations for their solution-based processing. Such a situation can also occur in the preparation processes of supramolecular polymers formed in a solution. An effective strategy to address this issue is to prepare amorphous solid states by introducing a “coformer” molecule capable of inhibiting the formation of an insoluble polymorph through co-aggregation. Herein, inspired by the coformer approach, we demonstrated a solubility enhancement of a barbiturate π-conjugated compound that can supramolecularly polymerize through six-membered hydrogen-bonded rosettes. Our newly synthesized supramolecular coformer molecule features a sterically demanding methyl group in the π-conjugated unit of the parent molecule. Although the parent molecule exhibits low solubility in nonpolar solvents due to the formation of a crystalline polymorph comprising a tape-like hydrogen-bonded array prior to the supramolecular polymerization, mixing with the coformer compound enhanced the solubility by inhibiting mesoscopic organization of the tapes. The two monomers were then co-polymerized into desired helicoidal supramolecular polymers through the formation of heteromeric rosettes.     

Block copolymer micelles with dye loaded on their shells or cores

We prepared reversible micelles with dye loaded on the shells or cores by ion exchange. A poly(4-styrylmethyl triphenylphosphonium chloride)-block-polystyrene diblock copolymer prepared from poly(4-vinylbenzylchloride)-block-polystyrene and triphenylphosphine was reacted with methyl orange in a mixed solvent of benzene and acetonitrile to produce poly[4-styrylmethyl triphenylphosphonium 4-(4-dimethylamino)phenylazobenzenesulfonate]-block-polystyrene. The loading of the methyl orange on the micellar shells or cores was dependent on the composition of the mixed solvents. Dynamic light scattering demonstrated that the loading of the dye on the cores significantly expanded the micelles when compared to that on the shells. The loading of the dye on the cores shifted the UV wavelength of the methyl orange, whereas that on the shells produced no changes in the UV wavelength. Transmission electron microscopy confirmed the formation of the spherical micelles.     

Synthesis of polystyrene microspheres by dispersion polymerization in supercritical carbon dioxide using a poly(dimethylsiloxane)-based macroazoinitiator

The synthesis of polystyrene microspheres was achieved by the dispersion polymerization of styrene in supercritical carbon dioxide using azobisisobutylonitrile (AIBN) and a poly(dimethylsiloxane) (PDMS)-based macroazoinitiator, VPS-1001. VPS-1001 contained seven to nine molecules of the azo groups and the PDMS blocks with a molecular weight of 10,000 per molecule. The polymerization in the presence of both VPS-1001 and AIBN produced polystyrene microspheres with a diameter below 4 μm in over 85% yields, whereas the polymerization with VPS-1001 in the absence of AIBN provided a nonspecific polystyrene in only 20% yield. The particle size decreased as a result of increasing the concentration of VPS-1001. It was confirmed that the polystyrene particles were stabilized by the PDMS-block-polystyrene formed through the polymerization initiated by VPS-1001 because the polymerization using a PDMS homopolymer provided nonspecific polystyrene as a precipitate during the polymerization.     

Observation of molecular ordering at the surface of trimethylpropylammonium bis(trifluoromethanesulfonyl)imide using high-resolution rutherford backscattering spectroscopy

The surface structure of trimethylpropylammonium bis(trifluoromethanesulfonyl)imide ([TMPA] [TFSI]) is studied by high-resolution Rutherford backscattering spectroscopy at room temperature. The results provide direct evidence of the molecular ordering at the surface. The C1 conformer of the [TFSI] anion is dominant among two stable conformers, and the anions are oriented with their CF3 groups pointing toward the vacuum in the outermost molecular layer. The anions in the second molecular layer also show preferred orientation although it is rather weak.     

Flash chemistry: fast chemical synthesis by using microreactors

This concept article provides a brief outline of the concept of flash chemistry for carrying out extremely fast reactions in organic synthesis by using microreactors. Generation of highly reactive species is one of the key elements of flash chemistry. Another important element of flash chemistry is the control of extremely fast reactions to obtain the desired products selectively. Fast reactions are usually highly exothermic, and heat removal is an important factor in controlling such reactions. Heat transfer occurs very rapidly in microreactors by virtue of a large surface area per unit volume, making precise temperature control possible. Fast reactions often involve highly unstable intermediates, which decompose very quickly, making reaction control difficult. The residence time can be greatly reduced in microreactors, and this feature is quite effective in controlling such reactions. For extremely fast reactions, kinetics often cannot be used because of the lack of homogeneity of the reaction environment when they are conducted in conventional reactors such as flasks. Fast mixing using micromixers solves such problems. The concept of flash chemistry has been successfully applied to various organic reactions including a) highly exothermic reactions that are difficult to control in conventional reactors, b) reactions in which a reactive intermediate easily decomposes in conventional reactors, c) reactions in which undesired byproducts are produced in the subsequent reactions in conventional reactors, and d) reactions whose products easily decompose in conventional reactors. The concept of flash chemistry can be also applied to polymer synthesis. Cationic polymerization can be conducted with an excellent level of molecular-weight control and molecular-weight distribution control.     

Measurement of sugars using the laser spray technique with a gold capillary

A gold (Au) capillary has higher thermal conductivity than a stainless steel capillary and can withstand capillary over-heating induced by high CO(2) laser irradiation (over 2.5 W) better than a stainless steel capillary. For this study, a laser spray using an Au capillary was applied for the detection of sugars. The signal of cationized compounds [M+Na](+) can be detected with higher sensitivity than with conventional laser sprays using high laser power (over 2.7 W). Using 3.5 W of laser power, the signal intensity is 15 times higher than the maximum value with stainless steel (2.3 W) in a 10(-5) M maltose aqueous solution. It is considered that almost all the water molecules evaporate by laser irradiation, which is impossible to achieve using a stainless steel capillary.     

Formation of 1 D and 3 D coordination polymers in the solid state induced by mechanochemical and annealing treatments: bis(3-cyano-pentane-2,4-dionato) metal complexes

Bis(3-cyano-pentane-2,4-dionato) (CNacac) metal complex, [M(CNacac)(2)], which acts as both a metal-ion-like and a ligand-like building unit, forms supramolecular structures by self-assembly. Co-grinding of the metal acetates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with CNacacH formed a CNacac complex in all cases: mononuclear complex was formed in the cases of Mn(II), Cu(II) and Zn(II), whereas polymeric ones were formed in the cases of Fe(II), Co(II) and Ni(II). Subsequent annealing converted the mononuclear complexes of Mn(II), Cu(II) and Zn(II) to their corresponding polymers as a result of dehydration of the mononuclear complexes. The resultant Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) polymeric complexes had a common 3 D structure with high thermal stability. In the case of Cu(II), a 1 D polymer was obtained. The Mn(II), Cu(II) and Zn(II) polymeric complexes returned to their original mononuclear complexes on exposure to water vapour but they reverted to the polymeric complexes by re-annealing. Co-grinding of metal chlorides with CNacacH and annealing of the mononuclear CNacac complexes prepared from solution reactions were also examined for comparison. [Mn(CNacac)(2)(H(2)O)(2)], [M(CNacac)(2)(H(2)O)] (M=Cu(II) and Zn(II)) and [M(CNacac)(2)](infinity) (M=Mn(II), Fe(II) and Zn(II)) are new compounds, which clearly indicated the power of the combined mechanochemical/annealing method for the synthesis of varied metal coordination complexes.     

Highly enantioselective Diels-Alder reactions of Danishefsky type dienes with electron-deficient alkenes catalyzed by Yb(III)-BINAMIDE complexes

1-Methoxy-3-trimethylsiloxy-1,3-butadiene (Danishefsky's diene) is recognized as a synthetically useful diene due to its high reactivity in the Diels-Alder reaction with electron-deficient alkenes to give oxygen-functionalyzed cyclohexenes and substituted cyclohexenones, which are important building blocks for the total synthesis of natural products. However, the development of catalytic enantioselective versions of Diels-Alder reactions using Danishefsky type dienes with electron-deficient alkenes has been difficult because of the instability of the dienes under Lewis acidic conditions. Only highly reactive CO and CN double bonds are employed in a hetero-Diels-Alder reaction which proceeds under catalysis of chiral Lewis acids. We have developed a new chiral ligand, BINAMIDE, which is easily prepared from 1,1'-binaphtyl-2,2'-diamine by acylation. The highly diastereo- and enantioselective Diels-Alder reaction of Danishefsky type dienes with electron-deficient alkenes in the presence of an Yb(III)-BINAMIDE complex has been developed. The reaction proceeded in an exoselective mode and gave chiral highly functionalized cyclohexene derivatives in good yields.