A brief study of the supercritical fluid chromatographic behavior of lanthanide β-diketonates

The chromatographic behaviors of lanthanide chelates of acetylacetone (ACAC), trifluoroacetylacetone (TFA), thenoyltrifluoroacetone (TTA), dipivaloylmethane (THD), 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione (FOD), and the thenoyltrifluoroacetonepyridine (TTA·Py) adduct were investigated using packed column supercritical fluid chromatography. Mobile phases consisting of neat and alcohol modified CO₂ were used with a phenyl packed stationary phase. Lanthanide complexes of ACAC, THD, and FOD were shown to have better chromatographic performance compared to the corresponding chelates with TFA, TTA, and TTA·Py. In particular, TTA complexes such as Eu(TTA)₃ showed characteristic thermal decomposition in the mobile phase at elevated temperature. In addition, retention behavior was found to be a temperature dependent function of volatility and solubility for all chelates studied.     

all-Z-Tetrabenzo

Crystal structures of the silver complexes derived from tetrabenzo[16]annulene with AgOTf and AgClO(4) are different, although these two complexes show similar (1)H NMR spectra reflecting a similar clathrate structure in solution. The silver complex of pentabenzo[20]annulene with AgClO(4) adopts a clathrate structure both in the solid state and in solution.     

Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane as a chiral counterion

Chiral resolution of native DL-tartaric acid was achieved by ion-pair capillary electrophoresis (CE) using an aqueous-ethanol background electrolyte with (1R,2R)-(-)-1,2-diaminocyclohexane (R-DACH) as a chiral counterion. Factors affecting chiral resolution and migration time of tartaric acid were studied. By increasing the viscosity of the background electrolyte and the ion-pair formation, using organic solvents with a lower relative dielectric constant, resulted in a longer migration time. The optimum conditions for both high resolution and short migration time of tartaric acid were found to be a mixture of 65% v/v ethanol and 35% v/v aqueous solution containing 30 mM R-DACH and 75 mM phosphoric acid (pH 5.1) with an applied voltage of -30 kV at 25 degrees C, using direct detection at 200 nm. By using this system, the resolution (Rs) of racemic tartaric acid was approximately 1. The electrophoretic patterns of tartaric and malic acids suggest that two carboxyl groups and two hydroxyl groups of tartaric acid are associated with the enantioseparation of tartaric acid by the proposed CE method.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.     

Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions

Biodegradable polyurethanes are an interesting alternative to many applications that involve plastics since they can minimize environmental problems caused by the low rates of natural degradation of synthetic polymers. In addition, since waterborne polyurethanes are based on aqueous dispersions, they restrict the use of organic solvents during processing and application of the polymer, thus contributing furthermore to reduce environmental damage. In this work, aqueous anionic polyurethane dispersions (PUD) with tailorable susceptibility for hydrolysis were synthesized by progressively replacing polypropylene glycol (PPG) with a biodegradable polycaprolactone diol (PCL) as soft segments. The hard segments were formed by extending isophorone diisocyanate (IPDI) with hydrazine (HZ). Dimethylol propionic acid (DMPA) was used as ionic center and triethyl amine (TEA) as neutralizer. The degree of phase separation was evaluated mainly by infrared spectroscopy (FTIR) and small angle X-ray scattering (SAXS). The results indicated that phase separation between hard and soft segments of poly(ester-urethane) is more significant than that of poly(ether-urethane). Data obtained from SAXS experiments indicated that phase separation within soft domains can also be present in samples containing both polyester and polyether soft segments. Hydrolytic degradation of the polymers in buffer solution of pH 7.4 and alkaline solution was performed as an initial test. The results showed that the fraction of polyester soft segments in the polyurethanes can be used to tailor the susceptibility of the materials to hydrolytic attack. Polyurethanes having higher contents of polyester were more promptly hydrolytically degraded than polyurethanes containing only polyether segments.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.