Olefin Metathesis and Beyond A list of abbreviations can be found at the end of this article

The advent of well-defined catalysts for olefin metathesis which combine high activity, durability, and excellent tolerance towards polar functional groups has revolutionized the field. The past decade has seen the rapid embrace of these reagents as tools for advanced organic and polymer chemistry and the success of this development is witnessed by a plethora of elegant applications to the synthesis of natural and nonnatural products. This review article provides an overview of these developments and intends to familiarize the reader with some very recent advances which hold the promise to expand the scope of the reaction even further. Moreover, the positive impact of metathesis on the fundamental logic of retrosynthetic planning is demonstrated by means of typical examples. Finally, it will be shown that metathesis is by no means restricted to alkenes as substrates, and some comments on metathesis reactions following unconventional mechanistic pathways will also be presented.     

A new synthesis of pyrazolo[1,5-d][1,2,4]triazines from pyrazolecarboxylic acid hydrazides and carbonyl compounds. I

Pyrazolo[1,5-d][1,2,4]triazines were synthesized from pyrazolecarboxylic acid hydrazides and carbonyl compounds. Pyrazolecarboxylic acid N-phenylhydrazide (1c) and formaldehyde gave not only the expected 4hn but 5 , respectively. The methyl substituted hydrazides with acetone afforded hydrazones, pyrazolotriazines or 13 depending on the position of the substituents. The reduction of both products yielded pyrazolecarboxylic acid hydrazides.     

Beitrag zur Bestimmung der Spurenverunreinigungen in Rheniummetall

Zusammenfassung Spuren von Zn, Cu, Ni, Co, Fe, Mn und Mo in Rheniummetall werden aus einer Einwaage ermittelt. Mo wird photometrisch als ternäres Mo(VI)Hydroxylamin-PAR-Chelat bestimmt. Die übrigen Elemente werden als PAN-Chelate gefällt und im abgetrennten Niederschlag mittels Röntgenfluoreszenzanalyse bestimmt.

---

A contribution to the determination of trace contaminants in rhenium metal

Summary Traces of Zn, Cu, Ni, Co, Fe, Mn, and Mo in rhenium metal were determined in a single weighed sample. Molydenum was determined photometrically as ternary Mo(VI)-hydroxylamine-PAR-chelate. The other elements were precipitated as PAN-chelates and then determined in the isolated precipitate by means of roentgen fluorescence analysis.

     

Zur Polymorphie von SrTeO3

Beside the transition into a ferroelectric phase at 583 K, monoclinic SrTeO₃(I) at ?1260 K transforms slowly into a high-temperature form (SrTeO₃(II)) which after quenching undergoes rapid phase transitions at 648 and 733 K. X-Ray data of triclinic α-SrTeO₃(II) (room temperature), monoclinic β-SrTeO₃(II) (660 K), and monoclinic γ-SrTeO₃(II) (770 K) are presented.     

High resolution field desorption mass spectrometry III

Summary For the examples shown in this study in all cases FD-MS allowed the determination of the molecular weight and the elemental composition. Some of the characteristic features of sulphonic acids and sulphonates in field desorption are described. The method is obviously very well suited for the analysis of non-volatile technical products (e.g. dyestuffs, detergents, drugs). Information about the molecular weight, the structure, organic and inorganic by-products and impurities is obtained and thus the applicability of FD-MS to the analysis of actual analytical problems is clearly demonstrated.

---

Hochauflösungs-Felddesorptions-MassenspektrometrieIII. Sulfonsäuren und Sulfonate

Zusammenfassung Für die untersuchten Verbindungen ergab FD-MS in allen Fällen das Molekulargewicht und die Bruttoformel. Einige der charakteristischen Merkmale von Sulfonsäuren und Sulfonaten bei der Felddesorption werden beschrieben. Die Methode ist für die Analyse nichtflüchtiger, technischer Produkte (z. B. Farbstoffe, Detergentien, Pharmazeutica) sehr gut geeignet. Sie liefert Informationen über das Molekulargewicht, die Struktur, organische und anorganische Nebenprodukte und Verunreinigungen.

Part II.: Schulten, H.-R., Games, D. E.: Glycosides. Biomed. Mass Spectrom. 1, 120 (1974).     

Tilt of atomic force microscope cantilevers: effect on spring constant and adhesion measurements

In atomic force microscopy, the cantilevers are mounted under a certain tilt angle alpha with respect to the sample surface. In this paper, we show that this increases the effective spring constant by typically 10-20%. The effective spring constant of a rectangular cantilever of length L can be obtained by dividing the measured spring constant by cos2 alpha(1 - 2D tan alpha/L). Here, alpha is the tilt angle and D is the size of the tip. In colloidal probe experiments, D has to be replaced by the radius of the attached particle. To determine the effect of tilt experimentally, the adhesion force between spherical borosilicate particles and planar silicon oxide surfaces was measured at tilt angles between 0 degrees and 35 degrees. The experiments revealed a significant decrease of the mean apparent adhesion force with a tilt of typically 20-30% at alpha = 20 degrees. In addition, they demonstrate that the adhesion depends drastically on the precise position of contact on the particle surface.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.     

Use of molecular dynamics in the design and structure determination of a photoinducible beta-hairpin

The study presented here consists of three parts. In the first, the ability of a set of differently substituted diazobenzene-based linkers to act as photoswitchable beta-turn building blocks was assessed. A 12-residue peptide known to form beta-hairpins was taken as the basis for the modeling process. The central (beta-turn) residue pair was successively replaced by six symmetrically ((o,o), (m,m), or (p,p)) substituted (aminomethyl/carboxymethyl or aminoethyl/carboxyethyl) diazobenzene derivatives leading to a set of peptides with a photoswitchable backbone conformation. The folding behavior of each peptide was then investigated by performing molecular dynamics simulations in water (4 ns) and in methanol (10 ns) at room temperature. The simulations suggest that (o,o)- and (m,m)-substituted linkers with a single methylene spacer are significantly better suited to act as photoswitchable beta-turn building blocks than the other linkers examined in this study. The peptide containing the (m,m)-substituted linker was synthesized and characterized by NMR in its cis configuration. In the second part of this study, the structure of this peptide was refined using explicit-solvent simulations and NOE distance restraints, employing a variety of refinement protocols (instantaneous and time-averaged restraining as well as unrestrained simulations). We show that for this type of systems, even short simulations provide a significant improvement in our understanding of their structure if physically meaningful force fields are employed. In the third part, unrestrained explicit-solvent simulations starting from either the NMR model structure (75 ns) or a fully extended structure (25 ns) are shown to converge to a stable beta-hairpin. The resulting ensemble is in good agreement with experimental data, indicating successful structure prediction of the investigated hairpin by classical explicit-solvent molecular dynamics simulations.