Thermal decomposition of ferrocene as a method for production of single-walled carbon nanotubes without additional carbon sources

A new method to grow bulk quantities of single-walled carbon nanotubes (SWCNTs) by a catalytic chemical vapor deposition (CVD) process with the possibility of varying the pressure has been developed and is reported in this paper. Thermal decomposition of ferrocene provides both catalytic particles and carbon sources for SWCNT growth using Ar as a carrier gas. Upon an increase in the pressure, the mean diameter of the SWCNTs decreases. In fact, high abundances of SWCNT with diameters as small as 0.7 nm, which is the limit for stable caps with isolated pentagons, can be obtained. An additional advantage of this method is that as no external carbon sources are required, SWCNT synthesis can be achieved at temperatures as low as 650 degrees C.     

Online LC-MS-MS process monitoring for optimization of biological treatment of wastewater containing azo dye concentrates

A biological high-performance treatment process comprising two 40-L reactor compartments has been developed for purification and decoloration of concentrated textile wastewater containing up to 15 g L⁻¹ reactive dyestuff. The decoloration rate of 95% meets the requirements of German legislation for textile wastewater treatment. Successful process development and optimization was achieved by use of high-performance liquid chromatography, with diode-array and electrospray tandem mass spectrometric (LC-ESI-MS-MS) detection, coupled with inline microfiltration membrane-sampling devices, applied online to bioreactors as a process analytical tool for the first time. The optimum process performance was found by correlation of dye and decoloration product-specific concentrations with summary properties such as redox potential and dissolved oxygen content. Details of the degradation and decoloration mechanism for the azo dye reactive black 5 was revealed by using mass spectrometry for structure elucidation.     

Rate constants and H atom branching ratios of the gas-phase reactions of methylidyne CH(X2Pi) radical with a series of alkanes

The reactions of the CH radical with several alkanes were studied, at room temperature, in a low-pressure fast-flow reactor. CH(X2Pi, v = 0) radicals were obtained from the reaction of CHBr(3) with potassium atoms. The overall rate constants at 300 K are (0.76 +/- 0.20) x 10(-10) [Fleurat-Lessard, P.; Rayez, J. C.; Bergeat, A.; Loison, J. C. Chem. Phys. 2002, 279, 87],1 (1.60 +/- 0.60) x 10(-10)[Galland, N.; Caralp, F.; Hannachi, Y.; Bergeat, A.; Loison, J.-C. J. Phys. Chem. A 2003, 107, 5419],2 (2.20 +/- 0.80) x 10(-10), (2.80 +/- 0.80) x 10(-10), (3.20 +/- 0.80) x 10(-10), (3.30 +/- 0.60) x 10(-10), and (3.60 +/- 0.80) x 10(-10) cm3 molecule(-1) s(-1), (errors refer to +/-2sigma) for methane, ethane, propane, n-butane, n-pentane, neo-pentane, and n-hexane respectively. The experimental overall rate constants correspond to those obtained using a simple classical capture theory. Absolute atomic hydrogen production was determined by V.U.V. resonance fluorescence, with H production from the CH + CH4 reaction being used as a reference. Observed H branching ratios were for CH4, 1.00[Fleurat-Lessard, P.; Rayez, J. C.; Bergeat, A.; Loison, J. C. Chem. Phys. 2002, 279, 87];1 C(2)H(6), 0.22 +/- 0.08 [Galland, N.; Caralp, F.; Hannachi, Y.; Bergeat, A.; Loison, J.-C. J. Phys. Chem. A 2003, 107, 5419];2 C(3)H(8), 0.19 +/- 0.07; C(4)H(10) (n-butane), 0.14 +/- 0.06; C(5)H(12) (n-pentane), 0.52 +/- 0.08; C(5)H(12) (neo-pentane), 0.51 +/- 0.08; C(5)H(12) (iso-pentane), 0.12 +/- 0.06; C(6)H(14) (n-hexane), 0.06 +/- 0.04.     

The algorithmic beauty of plant roots – an L-System model for dynamic root growth simulation

Understanding the impact of root architecture on plant resource efficiency is important, in particular, in the light of upcoming shortages of mineral fertilizers and changed environmental conditions. In the 1950s, a great number of root systems of European cultivated plants were excavated and studied by L. Kutschera (1960). Her work gave enormous insight into the variety of root system architectures and helped to realize the importance of belowground processes to plant productivity. We analysed the resulting hand drawings by using mathematical modelling and found root system parameters for a newly developed parametric L-System model. In this way we were able to first reproduce the illustrations, second computationally analyse root system traits and finally access the dynamic root architecture development.     

Mealiness assessment in apples using MRI techniques

Small samples of Top Red apples stored 6 months under controlled atmosphere (expected to be non-mealy) and 2 degrees C (expected to be mealy) have been used for MRI imaging. Multi-slice-multi-echo magnetic resonance images (64*64 pixels) have been recorded with a 8 ms echo time. Three out of four apples corresponding to the sample maintained under controlled atmosphere did not developed mealiness while three out of four fruits corresponding to the sample stored at 2 degrees C became mealy after 6 months of storage. The minimum T2 values obtained for the mealy apples show to be significantly lower (F = 13.21) when compared with non-mealy apples pointing that a more desegregated structure and a lower juiciness content leads to lower T2 signal. Also, there is a significant linear correlation (r = -0.76) between the number of pixels with a T2 value below 35 ms within a fruit image and the deformation parameter registered during the Magness-Taylor firmness test. Finally, all T2 maps of mealy apples show a regional variation of contrast which is not shown for non-mealy apples. Significant differences (F = 19.43) between mealy and non-mealy apples are found in the histograms of the T2 maps as mealy apples show a skew histogram combined with a "tail" in their high T2 extreme which is not shown in the histograms of non-mealy apples. These histogram features are also shown for an apple showing internal breakdown indicating that in mealy apples there is a differential water movement that may precede internal breakdown.     

Probing quantum-vacuum geometrical effects with cold atoms

The lateral Casimir-Polder force between an atom and a corrugated surface should allow one to study experimentally nontrivial geometrical effects in the electromagnetic quantum vacuum. Here, we derive the theoretical expression of this force in the scattering approach. We show that large corrections to the "proximity force approximation" could be measured using present-day technology with a Bose-Einstein condensate used as a vacuum field sensor.     

Lipophilicity and bio‐mimetic properties determination of phytoestrogens using ultra‐high‐performance liquid chromatography

This paper presents lipophilicity and bio‐mimetic property determination of 15 phytoestrogens, namely biochanin A, daidzein, formononetin, genistein, genistein‐4,7‐dimethylether, prunetin, 3,4,7‐trihydroxyisoflavon, 4,6,7‐trihydroxyisoflavon, 4,6,7‐trimethoxyisoflavon, daidzin, genistin, ononin, sissotrin, coumestrol and coumestrol dimethylether. High‐performance liquid chromatography with fast gradient elution and Caco‐2 cell line were used to determine the physicochemical properties of selected phytoestrogens. Lipophilicity was determined on octadecyl‐sylane stationary phase using pH 2.0 and pH 7.4 buffers. Immobilized artificial membrane chromatography was used for prediction of interaction with biological membranes. Protein binding was measured on human serum albumin and α‐1‐acid‐glycoprotein (AGP) stationary phases. Caco‐2 assay was used as a gold standard for assessing in vitro permeability. The obtained results differentiate phytoestrogens according to their structure where aglycones show significantly higher lipophilicity, immobilized artificial membrane partitioning, AGP binding and Caco‐2 permeability compared with glucosides. However, human serum albumin binding was very high for all investigated compounds. Furthermore, a good correlation between experimentally obtained chromatographic parameters and in silico prediction was obtained for lipophilicity and human serum albumin binding, while the somewhat greater difference was obtained for AGP binding and Caco‐2 permeability.     

Physicochemical Characterization of BADGE <Emphasis Type="Italic">n</Emphasis> = 0/Zinc Meso-tetra(4-pyridyl) Porphyrin Resin

In this work we introduce the zinc 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (ZnTPyP) macrocycle as a crosslinking agent of the epoxy resin BADGE n = 0. NMR, TEM and FTIR confirm that both homopolymerization and heteropolymerization (resulting in the formation of a pyridone) are taken place. DSC evidences two exothermic signals at 170 and 290°C, with enthalpy values of 262.3 and–20.7 J/g, respectively. Crystal powder diffraction supports that the second one corresponds to a physical process. The introduction of the ZnTPyP into the epoxy network improves the thermal stability of the material, which, although very weakly, shows ferromagnetic properties.