Electrokinetic migration across artificial liquid membranes Tuning the membrane chemistry to different types of drug substances

Twenty different basic drugs were electrokinetically extracted across a thin artificial organic liquid membrane with a 300 V d.c. electrical potential difference as the driving force. From a 300 microl aqueous sample (acidified corresponding to 10mM HCl), the drugs were extracted for 5 min through a 200 microm artificial liquid membrane of a water immiscible organic solvent immobilized in the pores of a polypropylene hollow fiber, and into a 30 microl aqueous acceptor solution of 10mM HCl inside the lumen of the hollow fiber. Hydrophobic basic drugs (logP>1.7) were effectively isolated utilizing 2-nitrophenyl octyl ether (NPOE) as the artificial liquid membrane, with recoveries up to 83%. For more hydrophilic basic drugs (logP<1.0), a mixture of NPOE and 25% (w/w) di-(2-ethylhexyl) phosphate (DEHP) was required to ensure efficient extraction, resulting in recoveries up to 75%. DEHP was expected to act as an ion-pair reagent ion-pairing the protonated hydrophilic drugs at the interface between the sample and the membrane, resulting in permeation of the interface.     

Efficient photoinduced DNA damage by coralyne

The photoinduced DNA damage by the berberine derivative coralyne is presented. The irradiation of coralyne in the presence of plasmid DNA namely, pBR322, leads to remarkably fast DNA damage by single-strand cleavage, as determined by agarose-gel electrophoresis. Even upon exposure to sunlight, almost all of the supercoiled plasmid is converted to the open circular form in less than a minute [c(pBR322) = 3.5 x 10(-9) M; c(coralyne) = 4.3 x 10(-5) M]. The efficiency of the DNA strand cleavage is not decreased in the presence of radical-trapping reagents such as tert-butanol or DMSO. Moreover, the extent of the DNA damage is the same under aerobic conditions and at reduced oxygen concentration. Thus, the formation of reactive intermediates such as hydroxyl radicals or singlet oxygen is excluded. These results show that the exposure of coralyne and derivatives thereof to light, even with moderate light intensity, needs to be avoided during experiments in which their biological activity is assessed by plasmid unwinding assays.     

Excited state dynamics in solid and monomeric tetracene: The roles of superradiance and exciton fission

The excited state dynamics in polycrystalline thin films of tetracene are studied using both picosecond fluorescence and femtosecond transient absorption. The solid-state results are compared with those obtained for monomeric tetracene in dilute solution. The room temperature solid-state fluorescence decays are consistent with earlier models that take into account exciton-exciton annihilation and exciton fission but with a reduced delayed fluorescence lifetime, ranging from 20-100 ns as opposed to 2?μs or longer in single crystals. Femtosecond transient absorption measurements on the monomer in solution reveal several excited state absorption features that overlap the ground state bleach and stimulated emission signals. On longer timescales, the initially excited singlet state completely decays due to intersystem crossing, and the triplet state absorption superimposed on the bleach is observed, consistent with earlier flash photolysis experiments. In the solid-state, the transient absorption dynamics are dominated by a negative stimulated emission signal, decaying with a 9.2 ps time constant. The enhanced bleach and stimulated emission signals in the solid are attributed to a superradiant, delocalized S(1) state that rapidly fissions into triplets and can also generate a second superradiant state, most likely a crystal defect, that dominates the picosecond luminescence signal. The enhanced absorption strength of the S(0)→S(1) transition, along with the partially oriented nature of our polycrystalline films, obscures the weaker T(1)→T(N) absorption features. To confirm that triplets are the major species produced by relaxation of the initially excited state, the delayed fluorescence and ground state bleach recovery are compared. Their identical decays are consistent with triplet diffusion and recombination at trapping or defect sites. The results show that complications like exciton delocalization, the presence of luminescent defect sites, and crystallite orientation must be taken into account to fully describe the photophysical behavior of tetracene thin films. The experimental results are consistent with the traditional picture that tetracene's photodynamics are dominated by exciton fission and triplet recombination, but suggest that fission occurs within 10 ps, much more rapidly than previously believed.     

The photophysical properties of chromophores at high (100 mM and above) concentrations in polymers and as neat solids

The absorption, fluorescence, and photostability of five conjugated chromophores: perylene, 2,5,8,11-tetra-t-butyl perylene (TTBP), perylene orange (PO), perylene red (PR), and a zwitterionic Meisenheimer complex (MHC), are studied as a function of concentration in poly(methyl methacrylate) (PMMA). At 1 mM concentrations, all five molecules exhibit properties consistent with unaggregated chromophores. At higher concentrations, perylene and PO both exhibit excimer formation, while TTBP, PR, and the MHC retain their monomeric fluorescent lineshapes. In these three molecules, however, the fluorescence decay times decrease by 10% (TTBP) to 50% (MHC) at concentrations of 100 mM in PMMA. The fluorescence properties of these highly concentrated samples are sensitive to the sample preparation conditions. In the neat solid where the effective concentration is on the order of 1 M, all three molecules exhibit very fast fluorescence decays, on the order of 150 ps or less, despite the fact that they retain their basic monomeric fluorescence lineshape. In addition to the enhanced nonradiative decay at high concentrations, these three molecules also undergo a concentration-dependent photobleaching. The combined effects of intermolecular nonradiative decay channels and photobleaching appear to be a general obstacle to achieving highly concentrated dye-doped solids.     

Tunneling in the reaction of acetone with OH

Based on recent detailed quantum mechanical computations of the mechanism of the title reaction and, this paper presents kinetics analysis of the overall rate constant and its temperature dependence, for which ample experimental data are available for comparison. The analysis confirms that the principal channel is the formation of acetonyl radical + H(2)O, while the channel leading to acetic acid is of negligible importance. It is shown that the unusual temperature dependence of the overall rate constant, as observed experimentally, is well accounted for by standard RRKM treatment that includes tunneling. This treatment is applied at the microcanonical level, with chemically activated distribution of entrance species, i.e. using a stationary rather than a thermal distribution that incorporates collisional energy transfer and competition between the redissociation and exit channel. A similar procedure is applied to the isotopic reaction acetone-d6 + OH with equally satisfying results, so that the experimental temperature dependence of the KIE (kinetic isotope effect) is perfectly reproduced. This very good agreement between calculation and experiment is obtained without any fitting to experimental values and without any adjustment of the parameters of calculation.     

Light-harvesting in carbonyl-terminated phenylacetylene dendrimers: The role of delocalized excited States and the scaling of light-harvesting efficiency with dendrimer size

The photophysics of a family of conjugated phenylacetylene (PA) light-harvesting dendrimers are studied using steady-state and time-resolved optical spectroscopy. The dendrimers consist of a substituted PA core surrounded by meta-branched PA arms. The total number of PA moieties ranges from 3 (first generation) to 63 (fifth generation). By using an alcohol/ketone substituent at the dendrimer core, we avoid through-space Forster transfer from the peripheral PA donors to the core acceptor (in this case, the carbonyl group), which simplifies the analysis of these molecules relative to the perylene-terminated molecules studied previously. The delocalized excited states previously identified in smaller dendrons are seen in these larger dendrimers as well, and their influence on the intersite electronic energy transfer (EET) is analyzed in terms of a point-dipole Forster model. We find that these new delocalized states can both enhance EET (by decreasing the spatial separation between donor and acceptor) and degrade it (by lowering the emission cross section and shifting the energy, resulting in poorer spectral overlap between donor and acceptor). The combination of these two effects leads to a calculated intersite transfer time of 6 ps, in reasonable agreement with the 5-17 ps range obtained from experiment. In addition to characterizing the electronic states and intersite energy transfer times, we also examine how the overall light-harvesting efficiency scales with dendrimer size. After taking the size dependence of other nonradiative processes, such as excimer formation, into account, the overall dendrimer quenching rate k(Q) is found to decrease exponentially with dendrimer size over the first four generations. This exponential decrease is predicted by simple theoretical considerations and by kinetic models, but the dependence on generation is steeper than expected based on those models, probably due to increased disorder in the larger dendrimers. We discuss the implications of these results for dendrimeric light-harvesting structures based on PA and other chemical motifs.     

Determination of acipimox in capsules by differential pulse polarography

A differential pulse polarographic (DPP) method has been developed for the determination of acipimox in its pharmaceutical formulations. Using Sörensen buffer pH 6.0 as supporting electrolyte a single, irreversible peak occurred at –0.79 V vs an Ag/AgCl reference electrode. The peak height vs concentration plot was found to be linear over the range of 10^–6 to 6 × 10^–4 mol/l. The detection limit is 60ng/ml. The analysis of a series of 10 Olbetam® 250 mg capsules showed an overall standard deviation of ± 4.18 mg and a S_rel of ± 1.66%, respectively.     

Development of a high-performance liquid chromatographic method with electrochemical detection for the determination of hyperforin

An HPLC method with electrochemical detection for the determination of hyperforin extracts without using additional sample precleaning has been developed and validated. The hyperforin solutions were separated isocratically using a mobile phase consisting of 10% ammonium acetate buffer (0.5 M, pH 3.7)-MeOH-acetonitrile (10:40:50, v/v) at a flow rate of 0.8 mL/min. Hyperforin was detected amperometrically with a glassy carbon electrode at a potential of +1.1 V versus Ag/AgCl/3 M potassium chloride reference electrode. Under these conditions, a plot of integrated peak area versus concentration of hyperforin was found to be linear over the range of 0.054-5.4 microg/mL, with a relative standard deviation of 2.2-8.6%. The limit of detection was 0.050 ng on column. The determination of the hyperforin content in a commercially available St. John's Wort preparation exhibited a mean content of 1.56 mg. Recovery experiments led to a mean recovery rate of 97 +/- 5.8%. The proposed method is not time-consuming, sensitive and reproducible and is therefore suitable for routine analysis of hyperforin in herbal medicinal products.     

Liquid chromatographic isolation of coplanar PCB congeners on an activated carbon stationary phase

A rapid and uncomplicated method for the fractionation of PCBs leading to an isolation of the highly toxic non-ortho substituted PCBs is described. The liquid chromatographic separation was achieved on a stationary phase consisting of activated carbon and Celite 545. Using eluents with different polarity, isolation of the non-ortho substituted PCBs in a single fraction was achieved. The fractions were analysed by GC/MS. The method was tested by the determination of non-ortho substituted PCBs in technical mixtures (Aroclor 1254 and Aroclor 1242). The results were compared with those obtained by using an HPLC fractionation on a porous graphitic carbon column. Finally, the micro-column fractionation was used for the determination of non-ortho substituted PCBs in native soil samples.