Influence of dose and ion concentration on formation of binary Al–Ni alloy nanoclusters

Colloidal Al–Ni nanoclusters were prepared in an aqueous polyvinyl alcohol solution containing aluminum chloride and nickel chloride as metal precursors, polyvinyl alcohol as a capping agent, isopropanol as a scavenger of hydroxyl radicals, and distilled water as a solvent. Gamma irradiations were carried out in a ⁶⁰Co gamma source chamber at doses up to 100 kGy. The nanocluster properties were characterized by transmission electron microscopy (TEM), UV–visible spectrophotometry, and X-ray diffraction (XRD). By controlling the dose and precursor concentration, nanoclusters with different particle sizes were obtained. The average particle diameter increased with increase of precursor concentration and decreased with increase of dose. This is owing to the competition between nucleation, growth, and aggregation processes in the formation of nanoclusters during irradiation.     

Semi-empirical study of ortho-cresol photo degradation in manganese-doped zinc oxide nanoparticles suspensions

ABSTRACT: The optimization processes of photo degradation are complicated and expensive when it is performed with traditional methods such as one variable at a time. In this research, the condition of ortho-cresol (o-cresol) photo degradation was optimized by using a semi empirical method. First of all, the experiments were designed with four effective factors including irradiation time, pH, photo catalyst's amount, o-cresol concentration and photo degradation % as response by response surface methodology (RSM). The RSM used central composite design (CCD) method consists of 30 runs to obtain the actual responses. The actual responses were fitted with the second order algebraic polynomial equation to select a model (suggested model). The suggested model was validated by a few numbers of excellent statistical evidences in analysis of variance (ANOVA). The used evidences include high Fvalue (143.12), very low P-value (<0.0001), non-significant lack of fit, the determination coefficient (R2 = 0.99) and the adequate precision (47.067). To visualize the optimum, the validated model simulated the condition of variables and response (photo degradation %) by a few number of three dimensional plots (3D). To confirm the model, the optimums were performed in laboratory. The results of performed experiments were quite close to the predicted values. In conclusion, the study indicated that the model is successful to simulate the optimum condition of o-cresol photo degradation under visible-light irradiation by manganese doped ZnO nanoparticles.     

Theoretical study for magnetic effect in dissociative adsorption of oxygen to a platinum monolayer on Ni(110) surface

We investigate oxygen dissociative adsorption to a platinum monolayer on Ni(110) surface (Pt/Ni(110)) by density functional theory. We have shown that the activation barrier on Pt/Ni(110) is lower than that on a clean Pt(001) surface. This may be due to the effect of magnetization of Pt surface. The reason of decrease of activation barrier can be attributed to the flow of electrons from oxygen to platinum surface because the d orbitals have spin polarization at the Fermi level where the down spin d orbitals are unoccupied.     

A harmony search algorithm for university course timetabling

One of the main challenges for university administration is building a timetable for course sessions. This is not just about building a timetable that works, but building one that is as good as possible. In general, course timetabling is the process of assigning given courses to given rooms and timeslots under specific constraints. Harmony search algorithm is a new metaheuristic population-based algorithm, mimicking the musical improvisation process where a group of musicians play the pitches of their musical instruments together seeking a pleasing harmony. The major thrust of this algorithm lies in its ability to integrate the key components of population-based methods and local search-based methods in a simple optimization model. In this paper, a harmony search and a modified harmony search algorithm are applied to university course timetabling against standard benchmarks. The results show that the proposed methods are capable of providing viable solutions in comparison to previous works.     

Accurate analysis of a high data rate UWB-DTR system in dense multipath fading channels

In this paper, we develop an analytical framework to evaluate the exact bit error rate (BER) performance of a high data rate Ultra-Wideband Differential Transmitted-Reference (UWB-DTR) system over a perfect IEEE 802.15.3a Channel Model 1 (CM1). Our analytical framework includes noise, inter-path/pulse interference (IPI), inter-symbol interference (ISI), and log-normal fading. We consider log-normal fading, which is an essential characteristic of CM1, for the first time. We show that the UWB-DTR system reaches an error floor in the high data rate mode of operation. It is shown that in high signal-to-noise ratio (SNR) regimes both the faded and the unfaded performance curves converge. The exact BER performance of the DTR system in CM1 is also derived via simulations to justify the derived formulas. Both the analytical and the simulation results show that the DTR-UWB receiver is too susceptible to a small change in the integration interval.     

Validated spectrophotometric methods for the determination of amiodarone hydrochloride in commercial dosage forms using p-chloranilic acid and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone.

Two simple, sensitive and economical spectrophotometric methods have been developed for the determination of amiodarone hydrochloride in pure form and commercial dosage form. These methods (A and B) are based on the reaction of amiodarone base as n-electron donor with p-chloranilic acid and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as pi-acceptors to give highly colored complex species which absorb maximally at 535 and 570 nm, respectively. Beer's law is obeyed in the concentration ranges 10.0 - 360.0 and 2.0 - 65.0 microg ml(-1) for methods A and B, respectively. Application of the proposed methods to commercial pharmaceutical tablets are presented.     

Optimized LiVOPO4 for cathodes in Li-ion rechargeable batteries

Improvement of the rate properties of orthorhombic LiVOPO₄ by using a milling approach and acetylene black additives as electronic binder is investigated. The average particle size of orthorhombic LiVOPO₄ was reduced from 12.0 μm to 6.1 μm by milling process by which the Li intercalation capacity into LiVOPO₄ increased to 40 mAhg⁻¹ at 0.4 mAcm⁻² (C/5). At an optimized acetylene black amount of 15 wt.%, a better uniformity in particle size distribution and dispersion of the current distribution was obtained. Thus, enhancing the kinetic performance a fairly large reversible intercalation capacity of Li was achieved with values of 100 and 60 mAhg⁻¹ at high rate conditions of C/5 (0.4 mAcm⁻²) and 1C (2 mAcm⁻²), respectively. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Inkjet-like printing of single-cells

Cell sorting and separation techniques are essential tools for cell biology research and for many diagnostic and therapeutic applications. For many of these applications, it is imperative that heterogeneous populations of cells are segregated according to their cell type and that individual cells can be isolated and analysed. We present a novel technique to isolate single cells encapsulated in a picolitre sized droplet that are then deposited by inkjet-like printing at defined locations for downstream genomic analysis. The single-cell-manipulator (SCM) developed for this purpose consists of a dispenser chip to print cells contained in a free flying droplet, a computer vision system to detect single-cells inside the dispenser chip prior to printing, and appropriate automation equipment to print single-cells onto defined locations on a substrate. This technique is spatially dynamic, enabling cell printing on a wide range of commonly used substrates such as microscope slides, membranes and microtiter plates. Demonstration experiments performed using the SCM resulted in a printing efficiency of 87% for polystyrene microbeads of 10 μm size. When the SCM was applied to a cervical cancer cell line (HeLa), a printing efficiency of 87% was observed and a post-SCM cell viability rate of 75% was achieved.     

Dissolution and Delignification of Bamboo Biomass Using Amino Acid-Based Ionic Liquid

In the present work, the dissolution of bamboo biomass was tested using a number of ionic liquids synthesized in laboratory. It was observed that one of the synthesized amino acid-based ionic liquids, namely 1-ethyl-3-methylimidazolium glycinate, was capable of dissolving the biomass completely. The dissolved biomass was then regenerated using a reconstitute solvent (acetone/water) and was characterized using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The results were compared to preconditioned bamboo biomass. The regenerated biomass was found to have a more homogenous macrostructure, which indicates that the crystalline form and structure of its cellulose has changed from type Ι to type ΙΙ during the dissolution and regeneration process.     

Data envelopment scenario analysis with imprecise data

In the existing DEA models, we have a centralized decision maker (DM) who supervises all the operating units. In this paper, we solve a problem in which the centralized DM encounters limited or constant resources for total inputs or total outputs. We establish a DEA target model that solves and deals with such a situation. In our model, we consider the decrease of total input consumption and the increase of total output production; however, in the existing DEA models, total output production is guaranteed not to decrease. Considering the importance of imprecise data in organizations, we define our model so as to deal with interval and ordinal data. A numerical illustration is provided to show the application of our model and the advantages of our approach over the previous one.