Independent isomeric-yield ratio of 89m,gNb from 93Nb(γ, 4n), natZr(p,xn), and 89Y(α, 4n) reactions

The independent isomeric-yield ratios of ^89m,gNb for the ⁹³Nb(γ, 4n) ^89m,gNb reaction with bremsstrahlung energies of 45-, 50-, 55-, 60-, and 70-MeV were measured by the activation and the off-line γ-ray spectrometric technique at 100 MeV electron linac of the Pohang accelerator laboratory. The isomeric-yield ratios of ^89m,gNb for the ^natZr(p, xn) ^89m,gNb and the ⁸⁹Y(α, 4n) ^89m,gNb reactions were measured by using a stacked-foil activation technique with the proton energies of 19–45 MeV and alpha energies of 38.9-, 40.5-, and 42.5-MeV at the MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences. The measured isomeric-yield ratio of ^89m,gNb from the ⁹³Nb(γ, 4n), ^natZr(p, xn), and ⁸⁹Y(α, 4n) reactions were compared with the similar literature data in the ⁸⁹Y(³He, 3n) reaction. It was found that the isomeric yield ratio of ^89m,gNb increases with projectile energy, which indicate the effect of excitation energy. However, for the similar compound nucleus with the same excitation energy, the isomeric-yield ratios of ^89m,gNb in the ⁸⁹Y(α, 4n) and ⁸⁹Y(³He, 3n) reactions are higher than those in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions, which indicates the role of input angular momentum. The isomeric-yield ratios of ^89m,gNb in the ⁹³Nb(γ, 4n), ^natZr(p, xn), ⁸⁹Y(α, 4n), and ⁸⁹Y(³He, 3n) reactions were also calculated theoretically using computer code TALYS 1.4. The theoretical isomeric-yield ratios of ^89m,gNb from four reactions increase with excitation energy. However, the theoretical value are significantly higher than the experimental data in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions but slightly lower or comparable in the ⁸⁹Y(α, 4n) rand ⁸⁹Y(³He, 3n) reactions.     

Radiostrontium separation from sodium molybdate solution and its measurement using LSA: an application to radiopharmaceutical analysis

Technetium (^99mTc), a decay product of molybdenum (⁹⁹Mo), is employed as radioisotope in nuclear medicine. Several practical devices known as generators are commercially available which enable the user to separate the daughter from the parent radionuclide. The present study is focused on quality control of chromatographic technetium generator. A properly constructed generator should comply with international requirements of radionuclide purity of ⁹⁰Sr/⁹⁹Mo ≤ 6 × 10^?8 and ⁸⁹Sr/⁹⁹Mo ≤ 6 × 10^?7. For this purpose an analytical method was optimized to quantify radiostrontium (⁸⁹Sr and ⁹⁰Sr) in sodium molybdate [Na ₂ ⁹⁹ MoO₄] solution, a fission product used for ⁹⁹Mo/^99mTc generators. Dowex 1 × 8 and alumina were used in sequence followed by tributyl phosphate extraction for radiostrontium separation. Cerenkov measurement of ⁸⁹Sr and ⁹⁰Sr (through its descendent ⁹⁰Y) was performed using Perkin Elmer Tricarb LSA 3170 with detection efficiency of 42 and 14 %, respectively. Since efficiency of Cerenkov counting is sensitive to presence of color, spectral index of sample was used to correct the counting efficiency. The chemical recovery for strontium was 22 % and for yttrium was 80 % as determined by inductively coupled plasma optical emission spectrometry. Lower limit of detection was found to be 6.3 and 14.4 Bq L^?1 for ⁹⁰Sr and ⁸⁹Sr, respectively with 60 min counting time. Hence method can be applied successfully to analyze ^89,90Sr in fission molybdenum used as radiopharmaceutical with a relative error of <10 %.     

An assessment of the liquid–gas partitioning behavior of major wastewater odorants using two comparative experimental approaches: liquid sample-based vaporization vs. impinger-based dynamic headspace extraction into sorbent tubes

The gas–liquid partitioning behavior of major odorants (acetic acid, propionic acid, isobutyric acid, n-butyric acid, i-valeric acid, n-valeric acid, hexanoic acid, phenol, p-cresol, indole, skatole, and toluene (as a reference)) commonly found in microbially digested wastewaters was investigated by two experimental approaches. Firstly, a simple vaporization method was applied to measure the target odorants dissolved in liquid samples with the aid of sorbent tube/thermal desorption/gas chromatography/mass spectrometry. As an alternative method, an impinger-based dynamic headspace sampling method was also explored to measure the partitioning of target odorants between the gas and liquid phases with the same detection system. The relative extraction efficiency (in percent) of the odorants by dynamic headspace sampling was estimated against the calibration results derived by the vaporization method. Finally, the concentrations of the major odorants in real digested wastewater samples were also analyzed using both analytical approaches. Through a parallel application of the two experimental methods, we intended to develop an experimental approach to be able to assess the liquid-to-gas phase partitioning behavior of major odorants in a complex wastewater system. The relative sensitivity of the two methods expressed in terms of response factor ratios (RF_vap/RF_imp) of liquid standard calibration between vaporization and impinger-based calibrations varied widely from 981 (skatole) to 6,022 (acetic acid). Comparison of this relative sensitivity thus highlights the rather low extraction efficiency of the highly soluble and more acidic odorants from wastewater samples in dynamic headspace sampling.     

Steric and Electronic Influence on the Coordination Aptitude of 4‐Formylpiperazine‐1‐Carbodithioate Towards Triorganotin(IV) Moieties

A fascinating ligand, 4‐formylpiperazinium 4‐formylpiperazine‐1‐carbodithioate (L‐salt) has been reacted with two electronically and sterically different trimethyltin(IV) chloride and triphenyltin(IV) chloride. The complexes 1 and 2 were characterized by elemental analysis, spectroscopic techniques, and X‐ray single crystal analysis. The latter technique confirmed the polymeric and monomeric nature of 1 and 2 , respectively. Both 1 and 2 showed intriguing molecular packing properties in the solid state. However, the packing of 1 is more interesting and unique where one‐dimensional polymer chains self assemble in two‐over‐two saltire‐shaped fashion to provide an overall multilayered structure. The different behavior of L toward two different tin(IV) compounds can be attributed to different electronic and steric environments around metal center.     

Numerical Modeling of Functional Fatigue in NiTi Wires

Motivated by the high potential of shape memory alloys (SMA) in several industrial applications, we investigate the material response under cyclic loading. In particular, the focus is set on the modelling of functional fatigue, which results in the deterioration of the specific features of SMA. In fact, functional fatigue restricts SMA in terms of its applicability for real structures and workpieces. This necessitates the development of material models which take this phenomenon into account. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental comparison of performance and emission characteristics of 4-stroke CI engine operated with Roselle and Jatropha biodiesel blends

The environmental degradation, combined with the continuous depletion of the world's fossil fuel reserves, has forced the search for alternative fuels. This study was performed to investigate the performance of novel biodiesels in the CI engine. The experiments were performed at three different compressions ratios (16:1, 17:1, 18:1) and four loading conditions (25%, 50%, 75%, 100%). Different types of fuels such as jatropha biodiesel (JB), roselle biodiesel (RB), and ternary biodiesel (TB) were prepared and analyzed. The thermal performance of different fuels was analyzed in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and exhaust gas temperature (EGT). The emission characteristics such as CO₂ emission, NO_x emission, and smoke emission were analyzed for all types of fuels. The results of these fuels in the engine were compared with mineral diesel (MD). The BTE was increased with increasing compression ratios and loads for all types of fuels. The BSFC was increased with increasing compression ratios but decreased with increasing loads. The increase in emission of NO_x was observed at higher compression ratios and loads. However, the CO₂ emission was decreased at higher loads and lower compression ratio. The performance curves achieved with a 20% jatropha biodiesel blend showed results that were approximate to those obtained with pure MD. The comparative analysis between different fuels showed that JB exhibit higher thermal performance as compared to other biodiesels. Therefore, JB can be a better alternative to conventional fuel.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

A hybrid nanofluid analysis near a parabolic stretched surface

Two dimensional incompressible steady viscous nano-fluid flow with the impacts of heat generation and porous medium is examined numerically. For this objective Ti₆Al₄v are taken as nano-particles dispersed in different base fluids such as methanol, engine oil and water. Basically in this study we will compare three different nano-fluids to assess their flow behaviour and thermal performance. The flow model is developed under certain assumptions. The two dimensional non-linear PDEs are converted into non-linear ODEs with suitable transformation. The numerical procedure is adopted to find the results by using Bvp4c technique in MATLAB. Moreover, graphs are generated for various parameters against the temperature and velocity profiles. The fluid behaviour for different parameter is examined on velocity and temperature profile. It is depicted that for high values of volume fraction and curvature parameter nano-particles leads to high velocity and temperature profile. Moreover, velocity profile decreases for permeability parameter, while temperature profile enhances for heat generation parameter. The influence of Nusselt number and skin friction also assessed. The model of entropy generation is also presented.     

Identification of phytobioconstituents present in Simmondsia chinensis L. seeds extract by GC-MS analysis

Simmondsia chinensis L. commonly called as Jojoba and belongs to family Simmondsiaceae. It has shown positive pharmacological activities of these compounds which include antidiabetic, antirheumatic, anthelminthic, antipsoriatic, antioxidant, antiepileptic, antigonorrheal, analgesic, anti-inflammatory, and pesticidal activity of jojoba. The multifaceted action of numerous bioactives existing in the seed extract with therapeutic activity have attracted great research interest by pharmaceutical industries. n-hexane extract of Simmondsia chinensis L. (SC) Seeds was analysed by gas chromatography-mass spectroscopy for identification and characterization of phytobioconstituents and its therapeutic claim by traditional system. The major compounds discovered in SC seeds extract are cis-9-octadecen-1-ol (24.85%), 9-octadecen-1-ol, (Z)- (18.24%), Stigmast-5-en-3-ol (14.10%), Ergost-5-en-3-ol, (3-β)-ol (5.26%), (Z)-14-tricosenyl formate (5.24%), Thiositosteroldisulfide (3.64%), Silane, Dimethyl (dimethylpentyloxysilyloxy) tetradecyloxy- (3.41%), Ergost-5-ene, 3-methoxy-, (3β,24R)- (2.55%), Ergosta-5,22-dien-3-ol (2.22%), 1,19-eicosadiene (2.17%), Pentacosane (2.02%), Stigmasta-5,22-dien-3-ol (1.64%), 1,19-eicosadiene (1.57%), 9-octadecen-1-ol, (Z)- (1.46%), 9,19-cyclo-9β-lanostan-3β-ol, 24-methylene- (1.14%), (9Z)-9-octadecenyl palmitate (1.50%), Hexadecanoic acid, 9-octadecenyl ester, (Z) (1.37%), 9Z)-9-octadecenyl (9Z)-9-hexadecenoate (1.01%). The hexane extract of Simmondsia chinensis seeds comprises various polar and nonpolar phytobioconstituents. These compounds were established qualitatively via GC-MS evaluation. GC-MS reports will be promising in pharmaceutical sector in identification of variety of Phytobioconstituents in distinct plant extracts, polyherbal extract and the standardization of particular plant materials.     

A study of heat and mass transfer of Non-Newtonian fluid with surface chemical reaction

Considering the significance of non-Newtonian fluid usage in manufacturing such as molten plastics, polymeric materials, pulps, and so on, significant efforts have been made to investigate the phenomenon of non-Newtonian fluids. In this article the influences of heat and mass transfer on non-Newtonian Walter's B fluid flow over uppermost catalytic surface of a paraboloid is encountered. An elasticity of the fluid layer is considered in the freestream together with heat source/sink and has the tendency to cause heat flow in the fluid saturated domain. The flow problem of two-dimensional Walter's B fluid is represented using Law of conservation of mass, momentum, heat, and concentration along with thermal and solutal chemical reactive boundary conditions. The governing equations are non-linear partial differential equation and are non-dimensionalized by employing stream function and similarity transformation. The final dimensionless equations yielded are coupled non-linear ordinary differential equations. Furthermore, shooting technique along with RK-4th order method is used to get the numerical results. Graphs and tables are modeled by using MATLAB software to check the effects of Walter's B parameter, Chemical reaction parameter and Thickness parameter on temperature, velocity, and concentration profiles. Tabular analysis shows the results of some physical parameters like skin friction coefficient, Nusselt number and Sherwood number due to the variation of Walter's B parameter, thickness parameter and chemical reactive parameter.