PhSeSiR(3)-Catalyzed Group Transfer Radical Reactions

A novel design for initiating radical-based chemistry in a catalytic fashion is described. The design of the concept is based on the phenylselenyl group transfer reaction from alkyl phenyl selenides by utilizing PhSeSiR(3) (1) as a catalytic reagent. The reaction is initiated by the homolytic cleavage of -C-Se- bond of an alkyl phenyl selenide by the in situ generated alkylsilyl radical (R(3)Si(*)), obtained by the mesolysis of PhSeSiR(3)](*)(-)( )()(1(*)(-)). The oxidative dimerization of counteranion PhSe(-) to PhSeSePh functions as radical terminator. The generation of 1(*)(-) is achieved by the photoinduced electron transfer (PET) promoted reductive activation of 1 through a photosystem comprising of a visible-light (410 nm)-absorbing electron rich DMA as an electron donor and ascorbic acid as a co-oxidant (Figure 1). The optimum mole ratio between the catalyst 1 and alkyl phenyl selenides for successful reaction is established to be 1:10. The generality of the concept is demonstrated by carrying out variety of radical reactions such as cyclization (10, 15-18), intermolecular addition (25), and tandem annulations (32).     

Pharmacokinetics of ICG and HPPH-car for the detection of normal and tumor tissue using fluorescence, near-infrared reflectance imaging: a case study

We present in vivo fluorescent, near-infrared (NIR), reflectance images of indocyanine green (ICG) and carotene-conjugated 2-devinyl-2-(1-hexyloxyethyl) pyropheophorbide (HPPH-car) to discriminate spontaneous canine adenocarcinoma from normal mammary tissue. Following intravenous administration of 1.0 mg kg-1 ICG or 0.3 mg kg-1 HPPH-car into the canine, a 25 mW, 778 nm or 70 mW, 660 nm laser diode beam, expanded by a diverging lens to approximately 4 cm in diameter, illuminated the surface of the mammary tissue. Successfully propagating to the tissue surface, ICG or HPPH-car fluorescence generated from within the tissue was collected by an image-intensified, charge-coupled device camera fitted with an 830 or 710 nm bandpass interference filter. Upon collecting time-dependent fluorescence images at the tissue surface overlying both normal and diseased tissue volumes, and fitting these images to a pharmacokinetic model describing the uptake (wash-in) and release (wash-out) of fluorescent dye, the pharmacokinetics of fluorescent dye was spatially determined. Mapping the fluorescence intensity owing to ICG indicates that the dye acts as a blood pool or blood persistent agent, for the model parameters show no difference in the ICG uptake rates between normal and diseased tissue regions. The wash-out of ICG was delayed for up to 72 h after intravenous injection in tissue volumes associated with disease, because ICG fluorescence was still detected in the diseased tissue 72 h after injection. In contrast, HPPH-car pharmacokinetics illustrated active uptake into diseased tissues, perhaps owing to the overexpression of LDL receptors associated with the malignant cells. HPPH-car fluorescence was not discernable after 24 h. This work illustrates the ability to monitor the pharmacokinetic delivery of NIR fluorescent dyes within tissue volumes as great as 0.5-1 cm from the tissue surface in order to differentiate normal from diseased tissue volumes on the basis of parameters obtained from the pharmacokinetic models.     

Experimental study and performance evaluation of various cook stove models based on energy and exergy analysis

This article presents the experimental study and comparative performance evaluation of four types of cook stoves using energy and exergy analysis. Analysis of four different types of cook stove models viz. Envirofit, Mangla, Harsha and Vikram were selected and the water boiling test has been carried out. The suitable biomass available from the local market was prepared in the proper size as described in the Bureau of Indian Standards (BIS) and has been used as the fuel for cook stove in this experimental study. The aluminium pots of proper capacity as per BIS standard have been used for different cook stoves. The data from the experiments was collected and evaluated for the energy and exergy efficiencies for different models. Based on the data analysis it is found that the exergy efficiency is much lower than that of the energy efficiency for all the four models. It is also found that the both the efficiencies of Envirofit model are found to be higher than those of other models studied here.     

Vibrational spectra of 2 (3H) benzofuranone studied by Raman,IR spectroscopy and AM1 semiempirical molecular orbital calculations

Raman spectra of 2 (3H) benzofuranone have been recorded in the region 400-3200 cm(-1) and the IR spectra have been recorded in the region 200-4000 cm(-1). Vibrational frequencies for the fundamental modes of this bicyclic heteroatomic molecule have also been calculated using Austin method 1 (AM1) semiempirical molecular orbital method. Vibrational assignments have been made for the fundamental modes and the observed combination and overtone bands are also assigned. A splitting in the carbonyl group (C=O stretching) frequency observed at 1640-1660 cm(-1) in both Raman and IR spectra, is explained as Fermi-resonance. Net atomic charges for each atom of this molecule along with its heat of formation were also calculated. It is evident from the calculations that the 2 (3H) benzofuranone is more stable than the 3 (2H) benzofuranone in contrast to earlier estimates.     

A new access to polyhydroxy piperidines of the azasugar class: synthesis and glycosidase inhibition studies

A new synthetic strategy has been devised to access a variety of polyhydroxylated piperidines belonging to the azasugar class of glycosidase inhibitors. The key precursor (3aR, 7aR)-5-benzyl-2,2-dimethyl-7-methylenehexahydro[1,3]dioxo[4,5-c]pyridine is obtained by photoinduced electron transfer (PET) cyclization of the corresponding alpha-trimethylsilylmethylamine radical cation to the tethered acetylene functionality. The new molecules have been evaluated for inhibitory properties for certain beta-glycosidases and have been found to be moderate to weak inhibitors of the enzymes under study.     

Surface modification of semiconductor photoelectrodes for better photoelectrochemical performance

The present paper describes the modification and solar hydrogen production studies employing a new semiconductor-septum (SC-SEP) photoelectrode ns-TiO₂/In₂O₃ based photoelectrochemical solar cell. The current-voltage characteristics of the above SC-SEP cell revealed that an enhancement in short-circuit current (I_SC) up to three times (5 ～ 14.6 mA cm^?2). The optimum hydrogen production rate was found to be 11.8 lh^?1 m^?2 for 5M H₂SO₄ and with a further increase in H₂SO₄ concentration, the hydrogen production rate was found to be invariant. In yet another part of our study instead of using new SC-SEP solar cell design, we used another new oxide material form such as ns-TiO₂/WO₃. The ns-TiO₂/WO₃ exhibited a high photocurrent and photo-voltage of 15.6 mA cm^?2, 960 mV, respectively. The ns-TiO₂/WO₃ electrode exhibited a higher hydrogen gas evolution rate of 13.8 lh^?1 m^?2. Evidences and arguments are put forward to show that, whereas for the bare ns-TiO₂ electrode, the improvement in the performance of this photo-electrode compared with its original form was due to the higher quantum yield. In the case of ns-TiO₂/In₂O₃ and ns-TiO₂/WO₃ photo-electrodes, the improvement is due to the improved spectral response resulting from decrease of energy band gap.     

A novel bioassay for screening and quantification of taxanes

We report a novel method for screening and quantifying tubulin-binding antimitotic agents that promote microtubule formation. The method is based on the shift in the peak of the fluorescence emission difference spectrum of tubulin complexed to metal free tetrakis(4-carboxyphenyl)porphyrin (TCPP) in the presence of antimitotic agents. Taxol (paclitaxel), an anti-tumor drug approved for the treatment of a variety of cancers, caused the appearance of a new fluorescence peak at 645 nm at concentrations as low as 125 nM, the intensity of which was a function of the paclitaxel concentration. Cephalomannine caused the induction of a new fluorescence peak at 651 nm only above 1 muM. Baccatin did not induce the appearance of any new peak within detectable operating measurement conditions. These observations are in accordance with the biological activities/cytotoxicities of these compounds. Accordingly, it is proposed that the new method can be used for high throughput screening of antimitotic compounds.     

Cyanex272 impregnated on Amberlite XAD-2 for separation and preconcentration of U(VI) from uranmicrolite (leachates) ore tailings

An organanophosphinic acid extractant Cyanex272 was impregnated on a macroporus polymeric solid support Amberlite XAD-2 and packed in a column to study sorption and desorption of U(VI) in HNO₃ media. Various physio-chemical parameters such as influence of HNO₃ concentration, amount of Cyanex272, nature of eluents, sample and eluent flow rates were studied systematically to optimize conditions for sorption and desorption of U(VI). The breakthrough volume for U(VI) was >1000 mL and column reusability was more than 50 cycles. U(VI) was selectively separated from some commonly associated rare earth elements and certain d-block elements in binary and synthetic mixtures. The method developed for U(VI) was applied for its recovery from uranmicrolite (leachate) ore tailings and an industrial effluent sample.