Vitamin B6 cofactor derived chemosensor for the selective colorimetric detection of acetate anions

A novel vitamin B₆ cofactor derived anion sensor L for the selective colorimetric detection of acetate has been developed by the condensation of pyridoxal and 2-aminothiophenol. The sensor L showed a noteworthy change in the visible region of the spectrum and was detected by the ‘naked-eye’ for both acetate and fluoride anions in DMSO but selectively for acetate in DMSO/H₂O (88:12, v/v). The anion recognition ability of L was investigated by spectroscopic (UV–vis and ¹H NMR) and DFT methods.     

Independent isomeric-yield ratio of 89m,gNb from 93Nb(γ, 4n), natZr(p,xn), and 89Y(α, 4n) reactions

The independent isomeric-yield ratios of ^89m,gNb for the ⁹³Nb(γ, 4n) ^89m,gNb reaction with bremsstrahlung energies of 45-, 50-, 55-, 60-, and 70-MeV were measured by the activation and the off-line γ-ray spectrometric technique at 100 MeV electron linac of the Pohang accelerator laboratory. The isomeric-yield ratios of ^89m,gNb for the ^natZr(p, xn) ^89m,gNb and the ⁸⁹Y(α, 4n) ^89m,gNb reactions were measured by using a stacked-foil activation technique with the proton energies of 19–45 MeV and alpha energies of 38.9-, 40.5-, and 42.5-MeV at the MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences. The measured isomeric-yield ratio of ^89m,gNb from the ⁹³Nb(γ, 4n), ^natZr(p, xn), and ⁸⁹Y(α, 4n) reactions were compared with the similar literature data in the ⁸⁹Y(³He, 3n) reaction. It was found that the isomeric yield ratio of ^89m,gNb increases with projectile energy, which indicate the effect of excitation energy. However, for the similar compound nucleus with the same excitation energy, the isomeric-yield ratios of ^89m,gNb in the ⁸⁹Y(α, 4n) and ⁸⁹Y(³He, 3n) reactions are higher than those in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions, which indicates the role of input angular momentum. The isomeric-yield ratios of ^89m,gNb in the ⁹³Nb(γ, 4n), ^natZr(p, xn), ⁸⁹Y(α, 4n), and ⁸⁹Y(³He, 3n) reactions were also calculated theoretically using computer code TALYS 1.4. The theoretical isomeric-yield ratios of ^89m,gNb from four reactions increase with excitation energy. However, the theoretical value are significantly higher than the experimental data in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions but slightly lower or comparable in the ⁸⁹Y(α, 4n) rand ⁸⁹Y(³He, 3n) reactions.     

Green synthesis of new naphthospiro chromanone scaffolds and their antimicrobial activity

An efficient synthesis of new naphthospiro chromanone scaffolds using ionic liquids as a green solvent under microwave irradiation is presented. The reaction was also studied under conventional elevated temperature conditions. The structures of newly synthesized compounds have been elucidated by means of IR, ¹H NMR, ¹³C NMR, and mass spectrometry data. All compounds were screened for their antimicrobial activity.     

Polysaccharide‐Based Oleogels Prepared with an Emulsion‐Templated Approach

The preparation and characterization of oleogels structured by using a combination of a surface‐active and a non‐surface‐active polysaccharide through an emulsion‐templated approach is reported. Specifically, the oleogels were prepared by first formulating a concentrated oil‐in‐water emulsion, stabilized with a combination of cellulose derivatives and xanthan gum, followed by the selective evaporation of the continuous water phase to drive the network formation, resulting in an oleogel with a unique microstructure and interesting rheological properties, including a high gel strength, G′>4000 Pa, shear sensitivity, good thixotropic recovery, and good thermostability.     

Formulation and evaluation of thermoreversible,mucoadhesive in situ intranasal gel of rizatriptan benzoate

The present study was aimed to formulate and evaluate in situ thermoreversible intranasal gel of an antimigraine drug rizatriptan benzoate. The poloxamer 407 and carbopol 934 were used as thermoreversible and mucoadhesive polymers respectively. The gels were prepared with cold method. The phase transition temperature was determined with visual method. The gels were evaluated for their pH, mucoadhesive strength, in vitro release and ex vivo drug permeation through goat nasal mucosa. The histopathological study of the nasal mucosa was carried out to check for its damage during drug permeation. The 18 % w/v poloxamer solution was found to be showing phase transition at physiologic conditions (34–35 °C). As the percentage of carbopol 934 was increased from 0.1 to 0.5 % w/v the gelling temperature was found to be decreased. All formulations were showing mucoadhesive strength above 4,000 dynes/cm². Drug permeation studies have indicated that the drug permeation rate can be increased by using carbopol 934 above 0.3 % w/v concentration. The histopathological evaluation of nasal mucosa after drug permeation study has not shown any evidence of damage. Thus in situ thermoreversible mucoadhesive gel of rizatriptan benzoate can be a promising approach to treat migraine.     

DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3, 6-dihydropyrimidin-1[2H]-yl)-N-(4-(1, 3-dioxo-1H-benzo [de]isoquinolin-2[3H]-yl) aryl) acetamides as antimicrobial agents

We report herein DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3,6-dihydropyrimidin-1[2H]-yl)-N-(4-(1,3-dioxo-1H-benzo[de]isoquinolin-2[3H]-yl) aryl) acetamides ( 4a-j ). The silent features of this new one pot synthesis include the shorter reaction time, high yields, simple workup, and simultaneous formation of N-Amide and N-benzyl bonds in the one pot. The newly synthesized compounds ( 4a-j ) were characterized by different spectral techniques such as IR, ¹H-NMR, ¹³C-NMR, HRMS. All the synthesized compounds were evaluated for their anti-bacterial and anti-fungal activities. The anti-bacterial activities results reveal that the compounds 4a , 4g , 4i , and 4j are most active against S. aureus. In the case of B. subtilis the compounds 4a , 4i , and 4j are found to be most active. The compounds 4c , 4e , 4i , and 4j are most active against E. coli. In the case of P. aeruginosa 4a , 4i & 4j are found to be more active. On the other hand, the anti-fungal activity result shows that the compounds 4d , 4f , 4i , and 4j are more active against A. niger. The compounds 4a , 4d , 4i , and 4j are found to be more active against C. albicans.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Physical properties and processing conditions correlations of the ldpe/lldpe tubular blown films

Experiments are carried out to verify a theory developed to correlate the strain history of the polymer during film blowing to the ultimate physical properties of the film. The theory predicts that the amount of strain put into the film once it starts to freeze, defined as strain in the amorphous region and the plastic strain, has a dominant effect on the film properties. Two grades of low and linear low density polyethylene, experimental resins supplied by Mobil chemical company, were used to produce the blown film yielding a 1.25 mil film at the for all experimental runs. Film surface and bulk temperatures, along the machine direction and around the bubble, were measured using the infra-red techniques to identify the points where film starts to crystallize. A video digitization technique was used to measure the bubble kinematics. Film properties were measured using standard ASTM methods. The results indicate a correlation between the amount of strain and a measure of stress with ultimate physical properties of the blown film. This principle leads to the correlation of both the machine and transverse film properties on the same surface. The results obtained can potentially be exploited by designing the blown-film equipment and processing conditions such that optimal bubble stretching produces desired film properties.     

Cerium vanadate/carbon nanotube hybrid composite nanostructures as a high-performance anode material for lithium-ion batteries

The pristine CeVO4 and CeVO4/CNT hybrid composite nanostructured samples were facilely synthesized using a simple silicone oil-bath method.From the X-ray diffra...