High temperature enthalpy increment and thermodynamic functions of U2Ti

This study investigated thermodynamic properties of uranium–titanium alloy to determine its suitability for storage of hydrogen isotopes. The enthalpy increments of U₂Ti were measured using a high temperature inverse drop calorimeter in the temperature range of 299–1,169 K. Temperature dependence of the molar enthalpy increment and molar heat capacity is expressed in the form $ H^\circ_{\text{m}} (T) - H^\circ_{\text{m}} (298.15\,{\text{K}})({\text{J }}\,{\text{mol}}^{ - 1} ) = 23.236(T/{\text{K}}) + 53.292 \times 10^{ - 3} (T/{\text{K}})^{2} - 21.294 \times 10^{5} ({\text{K}}/T) - 4523 $ and $ C^\circ_{\text{p,m}} ({\text{J}}\,{\text{K}}^{ - 1} \,{\text{g}}^{ - 1} ) = 23.236 + 10.6584 \times 10^{ - 2} (T/{\text{K}}) + 21.294 \times 10^{5} ({\text{K}}/T)^{2} (300 \le T/{\text{K}} \le 900) $ , respectively. A set of self consistent thermodynamic functions such as entropy, Gibbs energy function, heat capacity, and Gibbs energy and enthalpy values for U₂Ti have been computed using data obtained in this study and required data from the literature.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.     

Adsorption and Equilibrium Isotherm Study of Removal of Copper (II) Ions from Aqueous Solution by Chemically Modified Abelmoschus esculentus Fibers

The present study explores surface modification of Abelmoschus esculentus by graft copolymerization reaction using acrylonitrile as a monomer and ascorbic acid/H₂O₂ as a redox initiator. Further, polyacrylonitrile grafted fibers were treated with hydroxylamine to convert the nitrile group of the grafted fiber into the amidoxime group to enhance adsorption of copper ions from wastewater. The graft copolymers and amidoximated fibers were characterized by FT-IR and FE-SEM. The effects of physicochemical parameters such as pH of the solution, initial metal ion concentration, and time on Cu(II) adsorption were studied to optimize condition for maximum adsorption. In addition, Langmuir, Freundlich, and Tempkin models were applied to describe the adsorption isotherm of Cu²⁺ ions.     

Regiospecific Functionalization of Cyclic Allenes with Catecholeorane

Reaction of diborane¹ and disiamylborane² with cyclic allenes, resulted in the formation of a mixture of products resulting from the addition of boron at the central carbon as well as terminal carbon. Fish has reported that addition of 4, 4, 6-trimethyl-1, 3, 2-dioxaborinane to 1, 3-disubstituted allenes takes place at the central carbon atom preferentially when the hydroboration was done at 130° for 35–50 h in a sealed tube.³ The reactivity and stability of catecholborane at high temperatures which is known to provide greater stearic     

Applications of Dithioacetals in Ester Synthesis

The α-oxoketene dithioacetals are simple synthetic intermediates widely utilized and implicated for the synthesis of a variety of heterocyclic compounds other than alicyclic and aromatic compounds. They act as 1,3-electrophilic three-carbon synthons. The α-oxoketene dithioacetal of pyrazolone derivatives can be efficiently converted through a base-catalyzed alcoholysis into the corresponding ester in a single one-step reaction with good yield of pure products. In this article, we summarize recent direct conversion of α-oxoketene dithioacetals to highly desirable esters. The overall process is an example of intramolecular rearrangement of bonds. Characterization and identification of all synthesized compounds were assigned through ¹H NMR and mass spectroscopy.     

Synthesis of Metal‐Free Phthalocyanines in Functionalized Ammonium Ionic Liquids

A convenient, fast, efficient, and ecofriendly synthesis of metal‐free phthalocyanines from various substituted phthalonitriles in different hydroxyalkylammonium ionic liquids in the presence of 1,8‐diazabicyclo‐[5,4,0]‐undec‐7‐ene (DBU) is reported in moderate yields. The effect of concentration of DBU and temperature on the synthesis of phthalocyanine in N‐(2‐hydroxyethyl)‐N,N‐dimethylbutylammonium bromide ionic liquid has been examined, and the ionic liquid has been recovered and reused conveniently.     

A silicon-position dependent 6-endo-trig cyclization during Tsuji–Trost alkylation

Two silylated cyclohexenes products have been prepared by using a Tsuji–Trost palladium-catalyzed cyclization. It involves the generation of a cationic π-allylic palladium complex bearing a triethylsilyl group on C-3, which cyclizes via a 6-endo-trig process to afford the cyclohexene derivatives. It is also demonstrated that the position of the silyl group on the starting allylic substrate strongly influenced the reaction. It could favor either the production of the expected cyclohexenyl ring or a diene by an elimination that occurs on the silyl-substituted C-2 π-allylic palladium complex.     

DIFFUSION MEASUREMENTS IN MICROEMULSIONS

We have carried out diffusion coefficient measurements in both aqueous micelles and microemulsions using the techniques of palaeography and quasielastic light scattering (QLS) The former method involves the determination of the diffusion coefficient of an electroactive oil soluble probe at a polarizable microelectrode. For high water content microemulsions, both methods yield the same diffusion coefficients, which can be identified as the self diffusion coefficient For cetyltrimethylammonium bromide (CTAB) micelles, both methods yield the same result at the salt (NaBr) concentration at which the QLS measurements are independent of CTAB concentration. In more concentrated microemulsions, QLS data gave diffusion coefficients in agreement with polarography only for a sodium cetyl sulfate (SCS) system at 65-75 wt % water. For the SCS microemulsions at 60% water, and CTAB microemulsion at 60-75% water, the QLS data yielded rapid, nonexponential decays. However, consistent polarographic diffusion coefficients could still be obtained, By using probes of varying chain length (oil solubility), it has been demonstrated that these CTAB and SCS microemulsions containing butanol and pentanol cosurfactants respectively, are not cosolubilized systems but do contain distinct hydrophilic and hydropobic regions.     

Determination of Thallium in Soil

Abstract

A new spectrophotometric method is described for the determination of thallium in soil by extraction of Tl(III) with a toluene solution of N,N′-diphenylbenzamidine after acidification with 0.2–4.0 M HCl, and reaction of the extract with Crystal violet in the presence of 0.01–0.8 M HCl. The value of molar absorptivity of Tl(III)-X-CV complex (where X = Cl or Br; CV = Crystal violet) in toluene is 7.00 × 10⁴ 1 mole^?1 cm^?1 at the absorption maximum of 610 nm. The detection limit of the method is 20 ng ml^?1. The present method is free from interference of almost metal ions commonly associated with Tl. The method has been applied for analysis of the metal to soils.     

Modeling the role of government efforts in controlling extremism in a society

People having extreme idealogies affect the process in a region using fear of terror acts, money power, and the word of mouth communication network to change individuals to their way of thinking. This forces government to divert its limited financial resources for controlling extremism and thus affecting development. In this paper, therefore, a nonlinear mathematical model is proposed to study the dynamics of extremism governed by four dependent variables, namely, number of people in the general population having no extreme ideology, number of extreme ideologists, number of isolated ideologists (prisoners), and the cumulative density of government efforts and their interactions. The model is analyzed using the stability theory of differential equations and computer simulation. The analysis shows that if appropriate level of government efforts is applied on extremists, the spread of their ideology can be controlled in the general population. A numerical study of the model is also carried out to investigate the effects of certain parameters on the spread of extremism confirming the analytical results.Copyright © 2014 John Wiley & Sons, Ltd.