Grafting of polymers onto and/or from silica surface during the polymerization of vinyl monomers in the presence of γ‐ray‐irradiated silica

The effects of radicals on silica surface, which were formed by γ‐ray irradiation, on the polymerization of vinyl monomers were investigated. It was found that the polymerization of styrene was remarkably retarded in the presence of γ‐ray‐irradiated silica above 60 °C, at which thermal polymerization of styrene is readily initiated. During the polymerization, a part of polystyrene formed was grafted onto the silica surface but percentage of grafting was very small. On the other hand, no retardation of the polymerization of styrene was observed in the presence of γ‐ray‐irradiated silica below 50 °C; the polymerization tends to accelerate and polystyrene was grafted onto the silica surface. Poly(vinyl acetate) and poly(methyl methacrylate) (MMA) were also grafted onto the surface during the polymerization in the presence of γ‐ray‐irradiated silica. The grafting of polymers onto the silica surface was confirmed by thermal decomposition GC‐MS. It was considered that at lower temperature, the grafting based on the propagation of polystyrene from surface radical (“grafting from” mechanism) preferentially proceeded. On the contrary, at higher temperature, the coupling reaction of propagating polymer radicals with surface radicals (“grafting onto” mechanism) proceeded to give relatively higher molecular weight polymer‐grafted silica. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2972–2979, 2006     

Selective determination of tryptophan-containing peptides through precolumn derivatization and liquid chromatography using intramolecular fluorescence resonance energy transfer detection.

A selective and sensitive fluorometric determination method for native fluorescent peptides has been developed. This method is based on intramolecular fluorescence resonance energy transfer (FRET) detection in a liquid chromatography (LC) system following precolumn derivatization of the amino groups of tryptophan (Trp)-containing peptides. In this detection process, we monitored the FRET from the native fluorescent Trp moieties (donor) to the derivatized fluorophore (acceptor). From a screening study involving 10 fluorescent reagents, we found that o-phthalaldehyde (OPA) generated FRET most effectively. The OPA derivatives of the native fluorescent peptides emitted OPA fluorescence (445 nm) through an intramolecular FRET process when they were excited at the excitation maximum wavelength of the Trp-containing peptides (280 nm). The generation of FRET was confirmed through comparison with the analysis of a non-fluorescent peptide (C-reactive protein fragment (77 - 82)) performed using LC and a three-dimensional fluorescence detection system. We were able to separate the OPA derivatives of the Trp-containing peptides when performing LC on a reversed-phase column. The detection limits (signal-to-noise ratio = 3) for the Trp-containing peptides, at a 20-microL injection volume, were 41 - 180 fmol. The sensitivity of the intramolecular FRET-forming derivatization method is higher than that of the system that takes advantage of the conventional detection of OPA derivatives. Moreover, native non-fluorescent amines and peptides in the sample monitored at FRET detection are weaker than those of conventional fluorescence detection.     

The reaction γ +d → π+ + π− +p + n between 570 and 850 MeV andΔ ++ Δ − production

The reaction γ+d → π⁺+π^? +p + n has been measured in a kinematically complete way at incident photon energies from 570 to 850 MeV in steps of 40 MeV. From detailed comparison of measured data with results of event simulations, it is concluded that three different mechanisms, the quasi-free, double-delta and phase space productions, contribute to the reaction. Each of the cross sections corresponding to these mechanisms is determined separately.     

An autosampler with a short transfer line for Curie point pyrolysis capillary gas chromatography

A new multichannel autosampler which can automatically analyze up to twenty samples in sequence has been developed for Curie point pyrolysis – capillary GC. Compared with a previous system [1] the transfer line between the pyroysis unit and chromatograph is shorter, and thus has less dead volume, and can be operated at a higher temperature (300 °C). The relative yields of higher boiling point, highly polar, and thermally labile pyrolysates generated from polymers, and the reproducibility, were better than those obtained from the previous autosampler. To facilitate rapid operation an additional flow controller is installed on the new device to shorten the time taken to purge air from the sampler.     

Structure and properties of polypropylene crystallized from the glassy state

Glassy isotactic propylene (PP) films of thickness up to 0.3 mm were obtained by an ultraquenching technique. The structure and properties of the as-quenched and subsequently crystallized samples were characterized by various techniques. Electron microscopy indicates the glass has no structure larger than 25 Å. X-ray diffraction shows PP crystallizes from the glass into a smectic structure at ca. ?20°C and then transforms to monoclinic microcrystals at ca. 40°C; a nodular structure (80 to 100 Å in diameter) was observed on the surface. The transformation temperature increases with the film thickness. Annealing above the α-relaxation temperature results in an increase in the nodule size. A correspondence was found between the diameter of the nodules observed on the surface and long spacings obtained by small-angle X-ray scattering from the bulk. Dynamic mechanical spectra show the presence of two relaxation-like peaks at ca. ?10°C and 10°C for the as-ultraquenched samples. X-ray scattering, differential scanning calorimetry (DSC), and torsion pendulum measurements show PP crystallizes from the glass at a temperature, depending on the rate of heating, that corresponds to the lower relaxation peak temperature.     

Effect of pH on the Enantiospecificity of Homocysteine Monolayer on Au(111) for the Redox Reaction of 3,4‐Dihydroxyphenylalanine

The effect of pH on the enantiospecificity of Au (111) electrode modified with L ‐homocysteine was evaluated for the electrochemical redox reaction of 3,4‐dihydroxyphenylalanine (DOPA). Cyclic voltammetric peaks clearly exhibited enantiospecificity at pH 0.6 and 2, whereas no enantiospecificity was observed at pH 3, 4, and 5.5. Scanning tunneling microscopy confirmed the highly ordered (2√3×3√3)R30° structure of L ‐homocysteine at pH 0.6, at which L ‐homocysteine molecules form a dimer through the hydrogen‐bond between carboxy groups (COOH), while a disordered structure was observed at pH 5.5. These results suggest that the dimer formed in the acidic solutions at pH below 3 plays an important role in providing the enantiospecificity to the Au(111) surface.