A mild, efficient, and selective deprotection of tert-butyldimethylsilyl (TBDMS) ethers using dicationic ionic liquid as a catalyst

Selective deprotection of alkyl TBDMS ether in the presence of phenolic TBDMS ether using dicationic ionic liquid [tetraEG(mim)₂][OMs]₂ as a homogeneous catalyst showed significant catalytic activity in methanol at ambient temperature to produce respective alcohol in excellent yield. The present environmentally benign catalytic system is found to be very convenient, fast, high yielding, and clean method for selective desilylation of alkyl silyl ethers even in the existence of other sensitive organic functional groups such as aldehyde, methoxy, and acetate were also achieved.     

Phase Transfer Catalysed N-Monoalkylation of Amino Anthraquinones

1-Alkylaminoanthraquinones ( 2 a-f) and 1,4-bisalkylaminoanthraquinones ( 4 a-c) were prepared from aminoanthraquinones ( 1,3 ) by alkylation with alkyl sulphate/alkyl halide in presence of powdered sodium hydroxide, potassium carbonate and phase transfer catalyst.     

Fluorinated styrene-based monomers for cyclopolymerizations

The synthesis of versatile fluorine compounds and monomers for conducting polymer research and cyclopolymerizations is presented. Semiprotected 2,3,5,6-tetrafluoroterephthaldehyde 1 could be elaborated through Wittig olefination chemistry, deprotection and reduction to the previously unknown 4-vinyl-2,3,5,6-tetrafluorobenzylalcohol 8 in good yields. Compound 8 can be reacted to form the malonate ester, and then alkylation on the malonate moiety in mild conditions affords difunctional monomer 3. Through sequential esterifications on the malonate moiety, and subsequent alkylation, compound 4, a difunctional monomer for cyclopolymerization bearing one styrene and one perfluoroaryl styrene moiety, has been obtained. Preliminary experiments show that it is possible to cyclopolymerize 4 under free radical conditions.     

Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Calcium Chloride Solutions: Solubilities, Densities, Viscosities, and Electrical Conductivities at 30°C

Different physicochemical properties such as solubilities, densities, viscosities, and electrical conductivities of calcium sulfate dihydrate in aqueous calcium chloride solutions have been measured at 30°C to examine the ionic interactions in the system. Density values have been used to calculate the mean apparent molar volumes of ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of viscosity were combined with conductivity values to get the Walden product. The experimental data have been fitted by a polynomial equation for least-squares analysis to obtain the coefficients and the standard errors. Results have been examined in the light of the structure making or structure breaking effect of the various ions present in the solution.     

Superpositions of chiral states in the presence of electric dipole, magnetic dipole, and electric quadrupole interactions

This paper is a straightforward generalization of Maierle-Harris proposal regarding parity implications on the superpositions of chiral states of a molecule. It is shown that the inclusion of electric quadrupole and magnetic dipole interactions removes several of restrictions on the preparation of superpositions of mid R:L and mid R:R states of a chiral molecule. It is also found that the dephasing of mid R:L and mid R:R superpositions, due to the spontaneous emission from the chiral molecule, has opposing contributions from electric quadrupole-magnetic dipole and electric dipole interactions.     

Mechanical properties of cellulose nanomaterials studied by contact resonance atomic force microscopy

Quantification of the mechanical properties of cellulose nanomaterials is key to the development of new cellulose nanomaterial based products. Using contact resonance atomic force microscopy we measured and mapped the transverse elastic modulus of three types of cellulosic nanoparticles: tunicate cellulose nanocrystals, wood cellulose nanocrystals, and wood cellulose nanofibrils. These modulus values were calculated with different contact mechanics models exploring the effects of cellulose geometry and thickness on the interpretation of the data. While intra-particle variations in modulus are detected, we did not observe a measureable difference in modulus between the three types of cellulose particles. Improved practices and experimental complications for the characterization of cellulosic nanomaterials with atomic force microscopy are discussed.     

Influence of the addition of aluminium nanoparticles on thermo-rheological properties of hydroxyl-terminated polybutadiene-based composite propellant and empirical modelling

The heat transfer performance and entropy analysis are done in a compact loop heat pipe (CLHP) with Al₂O₃/water and Ag/water nanofluid. A compact loop heat pipe having a flat square evaporator with dimensions of 34 mm (L)?×?34 mm (W)?×?19 mm (H) has been fabricated and tested for the heat load ranging from 30 to 500 W. The experimental tests are conducted by keeping the CLHP in the vertical orientation with distilled water, silver (Ag)/water and aluminium oxide (Al₂O₃)/water nanofluid having low volume concentrations of (0.09% and 0.12%). The effect of wall and vapour temperature, evaporator and condenser heat transfer coefficient, thermal resistance on the applied heat loads is experimentally investigated and compared. The experimental results showed that the evaporator thermal resistance is reduced by 34.70% and 20.21%, respectively, for 0.12 vol% of Ag, Al₂O₃ nanoparticles when compared with that of the distilled water. For the same volume concentrations of Ag, Al₂O₃ nanoparticles, an enhancement of 34.52%, 23.7%, 39.27% and 30.8%, respectively, observed for the convective heat transfer coefficients at the evaporator and condenser. The entropy is also reduced by 19.08% and 11.58% when Ag and Al₂O₃ nanofluids are used as the operating fluid. From the experimental tests, it is found that the addition of small amount of Ag nanoparticles in the working fluid enhanced the operating range by 15% when compared with that of Al₂O₃/water nanofluid without the occurrence of any dry-out conditions.

     

Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Sodium Chloride Solutions: Solubilities,Densities, Viscosities,Electrical Conductivities,and Surface Tensions at 35 <Superscript>∘</Superscript>C

The thermodynamic, volumetric, transport, and surface properties, solubilities, densities, viscosities, electrical conductivities, and surface tensions of calcium sulfate dihydrate in aqueous sodium chloride solutions have been measured at 35 C, with a view to determine the ionic interactions that occur in these solutions. The experimental density values have been used to calculate the mean apparent molar volumes of the ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of the viscosity were combined with conductivity to yield the Walden product. Molar surface energies have been computed using experimental surface tension data. The experimental data have been fitted to polynomial equations by a least-squares analysis to obtain the coefficients and their standard errors. Results have been examined in the light of structure making or structure breaking effects of the various ions present in the solutions.     

High-Throughput GC-FID Method for the Determination of Residual Solvents in Early-Phase Drug Discovery Samples

Chromatographia - In drug discovery environment, determination of residual solvents is indispensable and requires rapid analysis covering a maximum number of commonly used solvents especially with...