Visible-light-promoted aerobic oxidative cyclization to access 1,3,4-oxadiazoles from aldehydes and acylhydrazides

A novel and practical access to symmetrical and unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles directly from aldehydes and acylhydrazides using visible light irradiation under an air atmosphere in the presence of eosin Y as an organophotoredox catalyst at rt is reported. This is the first example of oxidative cyclization of acylhydrazones employing air and visible light as inexpensive, readily available, non-toxic, and sustainable reagents.     

Radioanalytical separation and size-dependent ion exchange property of micelle-directed titanium phosphate nanocomposites

Nanocomposite titanium-phosphate (TiP) of different sizes was synthesized using Triton X-100 (polyethylene glycol-p-isooctylphenyl ether) surfactant. The materials were characterized by FTIR and powdered X-ray diffraction (XRD). The structural and morphological details of the material were obtained by scanning electron microscopy (SEM) and transmission electron microscopy. The SEM study was followed by energy dispersive spectroscopic analysis for elemental analysis of the sample. The important peaks of the XRD spectra were analyzed to determine the probable composition of the material. The average size distribution of the particles was determined by dynamic light scattering method. Ion exchange capacity was measured for different metal ions with sizes of the TiP nanocomposite and size-dependent ion exchange property of the material was investigated thoroughly. The nanomaterial of the smallest size of around 43 nm was employed to separate carrier-free ^137mBa from ¹³⁷Cs in column chromatographic technique using 1.0 M HNO₃ as eluting agent at pH 5.     

Nitro‐Substituted Bishomocubanes: Synthesis,Characterization, and Application as Energetic Materials

Several high‐energy‐density strained polycyclic compounds nitromethyl‐l,3‐bishomocubane (NMBHC), nitromethylene‐1,3‐bishomocubane (NMyBHC), and bis(nitromethyl)‐1,3‐bishomocubane (DNTMBHC), which were synthesized for the first time from bishomocubanone, hold potential for application as standalone fuels in liquid bipropellant systems or as additives in liquid and solid propellant formulations. DFT analysis at the B3LYP/6‐31G(d) level of theory was employed to optimize the geometries of the compounds and to determine their densities, heats of formation, and various thermodynamic properties. The density specific impulse, determined by using equilibrium thermodynamics, demonstrated an improvement of 75 s for NMBHC and NMyBHC over standard hydrocarbons. The specific impulse with ammonium perchlorate showed an improvement of 25–30 s over hydroxy‐terminated polybutadiene. Thermogravimetric analysis revealed that NMBHC, NMyBHC, and DNTMBHC evaporated readily with activation energies of 58.8, 69.2, and 74.5 kJ mol^?1, respectively.     

Sorptive elimination of fluoride from contaminated groundwater in a fixed bed column: A kinetic model validation based study

The current investigation involves a continuous adsorption experiment in a packed bed column for the sorptive elucidation of fluoride from contaminated groundwater using an activated soil-clay mixture. Through the combination of naturally accessible laterite soil with silica enriched clay (3:1 ratio), a low-cost Al–Si heterogeneous material has been developed. Following detailed characterization, the developed materials were employed in a long-time column process to achieve a high degree of fluoride separation from real-world groundwater. In a packed bed column investigation, the effect of bed height, initial fluoride concentration, and flow rate on the breakthrough properties of the adsorption system were investigated. By using a non-linear regression equation, three model kinetics, such as the Thomas Model, Adams-Bohart Model, and Yoon-Nelson Model, were fitted to validate the column-based experimental data, by analysing the breakthrough curves profiles, and distinct kinetic parameters. The Bed Depth Service Time Analysis (BDST) model was tested to express the effect of bed height on breakthrough curves, as well as to predict the time for breakthrough, and material depletion under optimal conditions. The Thomas and Yoon-Nelson models were identified to be the most appropriate ones for describing the entire breakthrough curve, whereas the Adams-Bohart model was only utilised to predict the first half of the dynamic process. With correlation coefficients (R²) 0.96, the experimental results were well suited to Thomas, Yoon-Nelson, and Adams-Bohart models. Finally, regeneration assessment was carried out where even after four cycles of operation, regenerated adsorbent showed a rejection efficacy of 78% to fluoride that proves the viability of the material and methodology.     

Effects of Dielectric Barrier Discharge Plasma on Physicochemical Characteristics,Mechanical Properties and Biocompatibility of Silk/PVA Nanofibers

Plasma Chemistry and Plasma Processing - This work reports an investigation of the discharge characteristics of atmospheric dielectric barrier discharge (DBD) plasma in terms of I-V curves and...     

Planar Iron Hydride Nanoclusters: Combined Spectroscopic and Theoretical Insights into Structures and Building Principles

The controlled assembly of well-defined planar nanoclusters from molecular precursors is synthetically challenging and often plagued by the predominant formation of 3D-structures and nanoparticles. Herein, we report planar iron hydride nanoclusters from reactions of main group element hydrides with iron(II) bis(hexamethyldisilazide). The structures and properties of isolated Fe₄, Fe₆, and Fe₇ nanoplatelets and calculated intermediates enable an unprecedented insight into the underlying building principle and growth mechanism of iron clusters, metal monolayers, and nanoparticles.     

Isomer-Specific Vibrational Spectroscopy of Microhydrated Lithium Dichloride Anions: Spectral Fingerprint of Solvent-Shared Ion Pairs

The vibrational spectroscopy of lithium dichloride anions microhydrated with one to three water molecules, [LiCl₂(H₂O)_1–3]⁻, is studied in the OH stretching region (3800–2800 cm⁻¹) using isomer-specific IR/IR double-resonance population labelling experiments. The spectroscopic fingerprints of individual isomers can only be unambiguously assigned after anharmonic effects are considered, but then yield molecular level insight into the onset of salt dissolution in these gas phase model systems. Based on the extent of the observed frequency shifts Δν^OH of the hydrogen-bonded OH stretching oscillators solvent-shared ion pair motifs (<3200 cm⁻¹) can be distinguished from intact-core structures (>3200 cm⁻¹). The characteristic fingerprint of a water molecule trapped directly in-between two ions of opposite charge provides an alternative route to evaluate the extent of ion pairing in aqueous electrolyte solutions.     

Palatability Enhancement Potential of Hermetia illucens Larvae Protein Hydrolysate in Litopenaeus vannamei Diets

Marine feed ingredients derived from cephalopods (e.g., squid) and crustaceans (e.g., krill) are commercially used to improve the palatability of shrimp diets. Increase in global demand for shrimps has resulted in overfishing of these marine organisms and is a matter of concern. Insect protein hydrolysate could be a sustainable alternative for the possible replacement of these marine feed ingredients. During this study, four formulations: diet A (control: not containing any palatability enhancer), diet B (containing squid meal and krill oil), diet C (containing 1% insect protein hydrolysate), and diet D (containing 2% insect protein hydrolysate) were tested for (1) time required by first subject to begin feeding (time to strike) and (2) palatability in Litopenaeus vannamei. Additionally, the chemical composition of all four diet formulations was also analyzed. Results indicate that all diets had similar crude composition. The major essential amino acids in all diets were leucine and lysine, whereas eicosapentaenoic acid was the major omega-3 fatty acid in all diets. There were no significant differences between the mean time to strike for all the tested formulations. Palatability of tested formulations was found in the following order: diet D > diet C > diet B = diet A (p < 0.05), indicating that addition of squid meal and krill oil has no effect on palatability in comparison to control, whereas inclusion of insect protein hydrolysates significantly improves the palatability of formulations. Palatability enhancement potential of insect protein hydrolysate could be attributed to the high free amino acid content and water solubility in comparison to squid meal.     

Kinetic Behavior of Quaternary Ammonium Hydroxides in Mixed Methane and Carbon Dioxide Hydrates

This study evaluates the kinetic hydrate inhibition (KHI) performance of four quaternary ammonium hydroxides (QAH) on mixed CH₄ + CO₂ hydrate systems. The studied QAHs are; tetraethylammonium hydroxide (TEAOH), tetrabutylammonium hydroxide (TBAOH), tetramethylammonium hydroxide (TMAOH), and tetrapropylammonium hydroxide (TPrAOH). The test was performed in a high-pressure hydrate reactor at temperatures of 274.0 K and 277.0 K, and a concentration of 1 wt.% using the isochoric cooling method. The kinetics results suggest that all the QAHs potentially delayed mixed CH₄ + CO₂ hydrates formation due to their steric hindrance abilities. The presence of QAHs reduced hydrate formation risk than the conventional hydrate inhibitor, PVP, at higher subcooling conditions. The findings indicate that increasing QAHs alkyl chain lengths increase their kinetic hydrate inhibition efficacies due to better surface adsorption abilities. QAHs with longer chain lengths have lesser amounts of solute particles to prevent hydrate formation. The outcomes of this study contribute significantly to current efforts to control gas hydrate formation in offshore petroleum pipelines.     

Fabrication and Characterization of Zinc Oxide Nanowire Based Two-electrode Capacitive Biosensors on Flexible Substrates for Estimating Glucose Content in a Sample

The present work deals with fabrication and characterization of the zinc oxide (ZnO) nanowire based novel two-electrode capacitive biosensors on flexible Polyethylene terephthalate (PET) substrates for accurate estimation of glucose by analyzing the fundamental dielectric nature of the relevant sample. The morphology and crystalline quality of grown nanowires are analyzed by using field-emission scanning electron microscope (FESEM) and X-ray diffractometer (XRD), respectively. Current and capacitance values of the device have been studied for ten different glucose concentrations relevant to the physiological standards. The analytical performance of the devices in terms of enzyme activity, reliability and flexibility has also been evaluated.