Microencapsulated Engineered <Emphasis Type="Italic">Lactococcus lactis Cells</Emphasis> for Heterologous Protein Delivery: Preparation and In Vitro Analysis

This article demonstrates the potential of encapsulated, engineered Lactococcus lactis as a vehicle for the oral delivery of therapeutic proteins. Using alginate-poly-l-lysine-alginate membrane-encapsulated L. lactis engineered to secrete the reporter protein Staphylococcal aureus nuclease, we show comparable viability and protein secretion between free and immobilized cells. After 12 h, microcapsules with a cell density of 4.8 × 10⁵ colony forming unit (CFU) ml⁻¹ grew to 2.2 × 10⁸ CFU ml⁻¹ and released 0.24 arbitrary unit (AU) ml⁻¹ of nuclease, producing similar results as free cells, which grew from 3.4 × 10⁵ to 1.9 × 10⁸ CFU ml⁻¹ and secreted 0.21 AU ml⁻¹ of nuclease. Moreover, encapsulated cells at a density of 4.4 × 10⁷ CFU ml⁻¹ grew to 2.2 × 10¹⁰ CFU ml⁻¹ in 12 h and secreted 15.3 AU ml⁻¹ of nuclease although 3.1 × 10⁷ CFU ml⁻¹ of free cells reached only 2.3 × 10⁹ CFU ml⁻¹ and released 5.6 AU ml⁻¹ of nuclease. We also show the sustained stability of the microcapsules during storage at 4°C over 8 weeks.     

An unusual, mild and convenient one-pot two-step access to (E)-stilbenes from hydroxy-substituted benzaldehydes and phenylacetic acids under microwave activation: a new facet of the classical Perkin reaction

A mild and convenient one-pot two-step synthesis of hydroxystilbenes with trans selectivity has been developed through a modified Perkin reaction between benzaldehydes and phenylacetic acids bearing 4- or 2-hydroxy substitution at the aromatic ring, in the presence of piperidine-methylimidazole and polyethylene glycol under microwave irradiation. The observation of a simultaneous condensation-decarboxylation leading to the unusual formation of hydroxystilbenes in lieu of α-phenylcinnamic acid reveals an interesting facet to the classical Perkin reaction. The developed protocol provides a green alternative to the prevalent methods employing a toxic decarboxylating agent in the form of quinoline/Cu salt, and the requirement for harsh protection-deprotection steps for the synthesis of hydroxylated stilbenes.     

Development and validation of an RP-HPLC method for quantitative determination of vanillin and related phenolic compounds in Vanilla planifolia

A simple and fast method was developed using RP-HPLC for separation and quantitative determination of vanillin and related phenolic compounds in ethanolic extract of pods of Vanilla planifolia. Ten phenolic compounds, namely 4-hydroxybenzyl alcohol, vanillyl alcohol, 3,4-dihydroxybenzaldehyde, 4-hydroxybenzoic acid, vanillic acid, 4-hydroxybenzaldehyde, vanillin, p-coumaric acid, ferulic acid, and piperonal were quantitatively determined using ACN, methanol, and 0.2% acetic acid in water as a mobile phase with a gradient elution mode. The method showed good linearity, high precision, and good recovery of compounds of interest. The present method would be useful for analytical research and for routine analysis of vanilla extracts for their quality control.     

A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

QbD approached comparison of reaction mechanism in microwave synthesized gold nanoparticles and their superior catalytic role against hazardous nirto‐dye

Microwave irradiation (MI) process characteristically enables extremely rapid “in‐core” heating of dipoles and ions, in comparison to conventional thermal (conductance) process of heat transfer. During the process of nanoparticles synthesis, MI both modulates functionality behaviors as well as dynamic of reaction in favorable direction. So, MI providing a facile, favorable and alternative approach during nanoparticles synthesis nanoparticles with enhanced catalytic performances. Although, conventionally used reducing and capping reagents of synthetic origin, are usually environmentally hazardous and toxic for living organism. But, in absence of suitable capping agent; stability, shelf life and catalytic activity of metallic nanoparticles adversely affected. However, polymeric templates which emerged as suitable choice of agent for both reducing and capping purposes; bearing additional advantages in terms of catalyst free one step green synthesis process with high degree of biosafety and efficiency. Another aspect of current works was to understand role of process variables in growth mechanism and catalytic performances of microwave processed metallic nanoparticles, as well as comparison of these parameters with conventional heating method. However, due to poor prediction ability with previously published architect OFAT (One factor at a time) design with these nanoparticles as well as random selection of process variables with their different levels, such comparison couldn't be possible. Hence, using gum Ghatti (Anogeissus latifolia) as a model bio‐template and under simulated reaction conditions; architect of QbD design systems were integrated in microwave processed nanoparticles to establish mechanistic role these variables. Furthermore, in comparison to conventional heating; we reported well validated mathematical modeling of process variables on characteristic of nanoparticles as well as synthesized gold nanoparticles of desired and identical dimensions, in both thermal and microwave‐based processes. Interestingly, despite of identical dimension, MI processed gold nanoparticles bearing higher efficiency (kinetic rate) against remediation of hazardous nitro dye (4‐nitrophenol), into safer amino (4‐aminophenol) analogues.     

High-performance thin layer chromatography method for quantitative determination of four major anthraquinone derivatives in Rheum emodi

A high-performance thin layer chromatographic (HPTLC) method for the rapid and simple quantification of the four major anthraquinone derivatives i.e. physcion, chrysophanol, emodin and chrysophanol glycoside in Rheum emodi is described. HPTLC of anthraquinone derivatives was performed on pre-coated RP-18 F254S HPTLC plates. For achieving good separation, the mobile phase of methanol-water-formic acid (80:19:1, v/v/v) was used. The densitometric determination of anthraquinone derivatives was carried out at 445 nm in reflection/absorption mode. The calibration curves were linear in the range of 20-100 ng for physcion, 80-400 ng for chrysophanol and emodin, and 200-1000 ng for chrysophanol glycoside. The method was found to be reproducible and convenient for quantitative analysis of anthraquinone derivatives in the methanolic extract of rhizomes of R. emodi collected from three different locations of Western Himalaya, India.     

A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases

In this paper we report a new idea for synthesizing polyaniline in an ordinary filter paper. The synthesis was carried out by a process in which aqueous acidic aniline solution and the oxidizing agent H(2)O(2) was added to the paper drop by drop and in sequence. Uniform polymerization could be obtained with the addition of reagents in either sequence. The polymer formation led to a green coloration of the paper. Formation of the emeraldine salt of polyaniline was confirmed by UV-vis and FTIR spectroscopy. Scanning electron microscopic measurements were made for surface characterization of the polymer formed in the paper. The same paper was used as a sensor for ammonia in vapor and in solution, for acid and base as well as endpoint indication, and also to filter acids and bases. We found that, using the polymer-containing paper, ammonia concentrations in a solution as low as 14 ppm could be measured.     

Au nanoparticles and polyaniline coated resin beads for simultaneous catalytic oxidation of glucose and colorimetric detection of the product

In this letter, we report the synthesis of Au nanoparticles (NPs) and polyaniline (PANI) on the same cation-exchange resin beads and demonstrate their use in catalyzing the oxidation of glucose to gluconic acid by Au NPs and simultaneously in detecting the formation of the acid by the color change of PANI. The synthesis was carried out by exchanging the cations of the resins with HAuCl4 and anilinuium chloride and then reducing the metal ions by NaBH4 to produce Au NPs followed by polymerization of aniline using H2O2. The green emeraldine salt form of PANI thus obtained was treated with NaOH to be converted to blue emeraldine base before use. The deposition of Au NPs was confirmed by a change in color of the bead, visible spectroscopy, X-ray diffraction, and scanning electron microscopic measurements. On the other hand, the presence of PANI was confirmed by Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. The formation of gluconic acid from glucose was confirmed by FTIR spectroscopy. We could detect the presence of glucose of a minimum 1.0 mM concentration in water, using the present method. Our experimental observations demonstrate the possibility of the incorporation of multifunctional components on the surfaces of resins for carrying out a chemical reaction as well as detection of the product.     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

Characterization of grafting density and binding efficiency of DNA and proteins on gold surfaces

The surface grafting density of biomolecules is an important factor for quantitative assays using a wide range of biological sensors. We use a fluorescent measurement technique to characterize the immobilization density of thiolated probe DNA on gold and hybridization efficiency of target DNA as a function of oligonucleotide length and salt concentration. The results indicate the dominance of osmotic and hydration forces in different regimes of salt concentration, which was used to validate previous simulations and to optimize the performance of surface-stress based microcantilever biosensors. The difference in hybridization density between complementary and mismatched target sequences was also measured to understand the response of these sensors in base-pair mismatch detection experiments. Finally, two different techniques for immobilizing proteins on gold were considered and the surface densities obtained in both cases were compared.