Synthesis of a palladium(II) complex of a <Emphasis Type="Italic">N</Emphasis>-heterocylic carbene via transmetalation: crystal structure and antibacterial studies

An Ag(I)-N-heterocylic carbene (NHC) complex, [Ag(L)₂]PF₆ (L = 1-(2′-methylbenzyl)-3-(2″-propyl)benzimidazolium), was used as a transfer agent for the synthesis of a Pd(II)–NHC complex, formulated as [PdCl(L)₂(MeCN)]PF₆ (Pd1). The complex Pd1 was characterized by ¹H and ¹³C NMR, FTIR spectroscopy and elemental analysis. Single crystal X-ray diffraction analysis reveals that the Pd(II) atom has a square planar geometry. This complex was screened for its antibacterial potential against the Gram-negative bacteria Escherichia coli (ATCC 25922) and the Gram-positive bacteria Staphylococcus aureus (ATCC 12600). These results are compared with those obtained for a standard antibiotic, ampicillin, and also the corresponding Ag(I)–NHC complex.     

Synthesis of tapioca cellulose-based poly(hydroxamic acid) ligand for heavy metals removal from water

A graft copolymerization was performed using free radical initiating process to prepare the poly(methyl acrylate) grafted copolymer from the tapioca cellulose. The desired material is poly(hydroxamic acid) ligand, which is synthesized from poly(methyl acrylate) grafted cellulose using hydroximation reaction. The tapioca cellulose, grafted cellulose and poly(hydroxamic acid) ligand were characterized by Infrared Spectroscopy and Field Emission Scanning Electron Microscope. The adsorption capacity with copper was found to be good, 210 mg g^?1 with a faster adsorption rate (t_1/2 = 10.5 min). The adsorption capacities for other heavy metal ions were also found to be strong such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were 191, 182, 202 and 173 mg g^?1, respectively at pH 6. To predict the adsorption behavior, the heavy metal ions sorption onto ligand were well-fitted with the Langmuir isotherm model (R² > 0.99), which suggest that the cellulose-based adsorbent i.e., poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability was checked by the sorption/desorption process for six cycles and the sorption and extraction efficiency in each cycle was determined. This new adsorbent can be reused in many cycles without any significant loss in its original removal performances.     

A bioactive cycloartane triterpene from Garcinia hombroniana

The dichloromethane bark extract of Garcinia hombroniana yielded one new cycloartane triterpene; (22Z,24E)-3β-hydroxycycloart-14,22,24-trien-26-oic acid (1) together with five known compounds: garcihombronane G (2), garcihombronane J (3), 3β acetoxy-9α-hydroxy-17,14-friedolanostan-14,24-dien-26-oic acid (4), (22Z, 24E)-3β, 9α-dihydroxy-17,14-friedolanostan-14,22,24-trien-26-oic acid (5) and 3β, 23α-dihydroxy-17,14-friedolanostan-8,14,24-trien-26-oic acid (6). Their structures were established by the spectral techniques of NMR and ESI-MS. These compounds together with some previously isolated compounds; garcihombronane B (7), garcihombronane D (8) 2,3’,4,5’-tetrahydroxy-6-methoxybenzophenone (9), volkensiflavone (10), 4’’-O-methyll-volkensiflavone (11), volkensiflavone-7-O-glucopyranoside (12), volkensiflavone-7-O-rhamnopyranoside (13), Morelloflavone (14), 3’’-O-methyl-morelloflavone (15) and morelloflavone-7-O-glucopyranoside (16) were evaluated for cholinesterase enzymes inhibitory activities using acetylcholinesterase and butyrylcholinesterase. In these activities, compounds 1–9 showed good dual inhibition on both the enzymes while compounds 10–16 did not reasonably contribute to both the cholinesterases inhibitory effects.     

Environmentally benign and highly regioselective ring opening of epoxides accelerated by ultrasound irradiation

Regioselective ring opening of aliphatic and aromatic epoxides with nitrogen heterocycles such as indoles and imidazoles was accelerated using an ultrasonic technique as a green approach. An optimized procedure with the catalyst of choice, MCM-41, represents a real alternative to the conventional reaction protocols owing to the catalyst recyclability, simplicity, green conditions and time-saving aspects.     

A Facile Method to Prepare Double‐Layer Isoporous Hollow Fiber Membrane by In Situ Hydrogen Bond Formation in the Spinning Line

A double‐layer hollow fiber is fabricated where an isoporous surface of polystyrene‐block‐poly(4‐vinylpyridine) is fixed on a support layer by co‐extrusion. Due to the sulfonation of the support layer material, delamination of the two layers is suppressed without increasing the number of subsequent processing steps for isoporous composite membrane formation. Electron microscope‐energy‐dispersive X‐ray spectroscopy images unveil the existence of a high sulfur concentration in the interfacial region by which in‐process H‐bond formation between the layers is evidenced. For the very first time, our study reports a facile method to fabricate a sturdy isoporous double‐layer hollow fiber.

     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Clonal structure and variation in virulence of Salmonella enteritidis isolated from mice, chickens, and humans

The clonal analysis of a diverse collection of Salmonella Enteritidis indicates that most strains belong to a single multilocus genotype (i.e., ET-3) regardless of phage type, geographic origin, or time of isolation that spanned over 2 decades (1978 to 2004). Attachment and invasion assays, however, indicate that, among ET-3 isolates, there is a distinct invasive bacterial subpopulation that is more readily recovered from eggs and clinical cases in humans than from chicken cecal samples. These observations support the hypothesis that the specialized ability of S. Enteritidis to infect the avian reproductive tract and contaminate eggs has been critical in its emergence as a frequent cause of human illness.     

Cucurbitacin glucosides from Citrullus colocynthis

A new cucurbitacin glucoside 2-O-beta-D-glucopyranosyl-16alpha-20R-dihydroxy-cucurbita-1,5,23E,25(26)-tetraen-3,11,22-trione (1) has been isolated from the methanolic extract of the fruits of Citrulluscolocynthis. The structure has been assigned on the basis of spectral analysis including 1D and 2D NMR techniques. In addition 2-O-beta-D-glucopyranosyl-cucurbitacin B (arvenin I) (2) and 2,25-di-O-beta-D-glucopyranosyl-cucurbitacin L (3) are reported for the first time from this species.     

Numerical investigation of flame propagation in pulse detonation engine with variation of obstacle clearance

Journal of Thermal Analysis and Calorimetry - The objective of present research work is to investigate the combustion flame acceleration and performance of pulse detonation engine (PDE). The PDE...