Viscometric Estimation of Unperturbed Chain Dimensions of Polymers

A new expression is proposed to determine the unperturbed dimensions of coil-like polymers viscometrically by use of the Flory and Kratky expression. The unperturbed dimensions so estimated are compared with the results obtained by using different expressions available in the literature. The results are comparable even for stiff chain polymers. The data obtained under theta conditions also fit this expression very well. The effect of molecular weight, its distribution, and that of the solvent has also been studied. It is concluded that the unperturbed dimensions are independent of molecular weight and solvent but depend on the heterogeneity of the system.     

Synthesis,spectroscopic and crystal structure analysis of 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)imidazo[2,1-b][1,3,4]thiadiazole and its morpholinomethyl derivative

The preparation of 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)-5-morpholin-1-ylmethyl imidazo[2,1-b][1,3,4]thiadiazole via the intermediate 2-(4-fluorobenzyl)-6-(4-methoxyphenyl)Imidazo[2,1-b][1,3,4] thiadiazole is described. Elemental analysis, IR spectrum, ¹H NMR and X-ray crystal structure analyses were carried out to determine the compositions and molecular structures of the two compounds. The crystal packing exhibits intermolecular C–H?O, C–H?N, C–H?F and π–π stacking interactions leading to the formation of the supramolecular network.     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Oxazoline‐Based Organocatalyst for Enantioselective Strecker Reactions: A Protocol for the Synthesis of Levamisole

A chiral oxazoline‐based organocatalyst has been found to efficiently catalyze asymmetric Strecker reactions of various aromatic and aliphatic N‐benzhydrylimines with trimethylsilyl cyanide (TMSCN) as a cyanide source at ?20 °C to give α‐aminonitriles in high yield (96 %) with excellent chiral induction (up to 98 % ee). DFT calculations have been performed to rationalize the enantioselective formation of the product with the organocatalyst in these reactions. The organocatalyst has been characterized by single‐crystal X‐ray diffraction analysis, as well as by other analytical methods. This protocol has been extended to the synthesis of the pharmaceutically important drug molecule levamisole in high yield and with high enantioselectivity.     

The Ligand‐Based Quintuple Bond‐Shortening Concept and Some of Its Limitations

Herein, the ligand‐based concept of shortening quintuple bonds and some of its limitations are reported. In dichromium–diguanidinato complexes, the length of the quintuple bond can be influenced by the substituent at the central carbon atom of the used ligand. The guanidinato ligand with a 2,6‐dimethylpiperidine backbone was found to be the optimal ligand. The reduction of its chromium(II) chloride–ate complex gave a quintuply bonded bimetallic complex with a Cr? Cr distance of 1.7056 (12) Å. Its metal–metal distance, the shortest observed in any stable compound yet, is of essentially the same length as that of the longest alkane C? C bond (1.704 (4) Å). Both molecules, the alkane and the Cr complex, are of remarkable stability. Furthermore, an unsupported Cr^I dimer with an effective bond order (EBO) of 1.25 between the two metal atoms, indicated by CASSCF/CASPT2 calculations, was isolated as a by‐product. The formation of this by‐product indicates that with a certain bulk of the guanidinato ligand, other coordination isomers become relevant. Over‐reduction takes place, and a chromium–arene sandwich complex structurally related to the classic dibenzene chromium complex was observed, even when bulkier substituents are introduced at the central carbon atom of the used guanidinato ligand.     

A sustainable method of mitigating acid corrosion of mild steel using jackfruit pectin (JP) as green inhibitor: Theoretical and electrochemical studies

This study is attempted to develop a green corrosion inhibitor from a waste material of Jack fruit (Artocarpus heterophyllus). This method is therefore quite valuable to health, environment, and economic point of view. Pectin is isolated from the jackfruit peel waste using 0.05 ?N oxalic acid and used as an inhibitor for mild steel corrosion in acidic environment as it is highly water soluble. 250–1000 ?ppm of pectin was used in this study at a temperature range of 303–323 ?K. The protection efficiency of jack fruit pectin (JP) in 0.5 ?M HCl was evaluated by conventional weight loss and electrochemical techniques. The potentiodynamic polarization results revealed that JP could effectively reduce the corrosion of mild steel in acidic medium at 1000 ?ppm concentration with an inhibition efficiency of 89.75% and corrosion rate of 2.392 mpy. The mixed type behavior of the inhibitor is identified from Tafel polarization studies. Electrochemical impedance spectroscopy (EIS) measurements suggest that the corrosion inhibition process is kinetically controlled. adsorption and kinetic behavior of the inhibitor also have been studied. Surface manifestations were followed using FESEM and AFM techniques. DFT calculations and Monte Carlo simulations were also carried out to corroborate the experimental results with theoretical outputs and succeeded to a great extent.     

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt

Cellulose - In this paper, we report the effect of doping sodium iodide (NaI) salt into a polymer blend matrix of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA). Solution...